Wmh164xws1 Parts

The Grill-Vent is an OEM part for Whirlpool ranges. This part facilitates proper ventilation and airflow within the oven cavity. The grill-vent plays a vital role in regulating temperature, preventing overheating, and ensuring even heat distribution during the cooking process.

Causes of a bad grill-vent can include buildup of grease, food debris, or other obstructions that impede airflow, as well as physical damage or warping due to high temperatures or mishandling.

Symptoms of a bad grill-vent include:

• Uneven heating or hot spots within the oven cavity
• Overheating or excessive temperature fluctuations
• Smoke or odors emanating from the oven during operation
• Difficulty in maintaining desired oven temperatures
• Premature failure or inefficient performance of heating elements

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a microwave door assembly that is white in color. It includes the handle, panels, and shielding. Since this does contain shielding components, a trained professional needs to test the microwave for leaks in the microwave shield prior to use. The person performing the replacement should wear gloves to protect their hands.If the microwave has suffered a forceful impact on the door, it could become dented or broken. This is a genuine OEM replacement part. It is compatible with microwaves that are manufactured by Whirlpool including the Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper brands. This microwave door assembly is sold individually and is sourced straight from the manufacturer.

This replacement panel door assembly is made by Whirlpool and is compatible with microwave ovens.The microwave door is subject to wear and tear that can cause cracking, dents, fractures, or may cause the door to entirely detach or break. The appliance should never be used if the door is broken, so this part should be replaced immediately if faulty in any way.This is an authentic OEM part made of high-quality, durable materials and is only sold individually. This door assembly can be used with compatible microwaves manufactured by Whirlpool, Maytag, KitchenAid, Jenn-Air, Magic Chef, and other brands.

The Microwave Filter is an OEM part for Whirlpool microwaves. This filter is designed to capture grease, smoke, and odors generated during cooking, helping to maintain clean air quality and preventing grease buildup inside the microwave and kitchen. The filter measures about 7-1/2 inches wide by 5-1/2 inches deep.

Causes of a bad microwave filter can include clogging from grease and food particles, wear and tear from regular use, or damage from cleaning. A clogged or damaged filter can reduce the efficiency of the microwave's ventilation system and potentially lead to overheating.

Symptoms of a bad microwave filter include:

• Reduced ventilation efficiency
• Excessive smoke or odors during cooking
• Grease buildup inside the microwave or on nearby surfaces
• Visible dirt, damage, or clogging on the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Nut is an OEM part for Whirlpool microwaves. It helps secure various parts within the microwave, ensuring proper assembly and function. It is used to fasten items, keeping them securely in place during use.

A bad microwave nut can occur due to wear and tear over time or accidental damage. If the nut becomes loose, stripped, or misplaced, it can lead to instability and compromise affected parts.

Symptoms of a bad microwave nut include:

• Loose or wobbly parts.
• Difficulty in operating the microwave.
• Unusual noises or vibrations during use.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Comes with 4 supports. Color: chrome.

This support secures and stabilizes a mating component inside your appliance, helping restore proper alignment and fit. Replace a damaged or missing support to stop wobble, sagging, or misalignment.

• Provides structural backing to keep the attached part level and in place
• Helps eliminate rattling, shifting, or uneven gaps
• Replace if cracked, deformed, or missing
• Symptoms can include loose or sagging parts, poor alignment, or difficulty reinstalling shelves/panels

• Disconnect power (and shut off water, if applicable) before service
• Remove the affected shelf/drawer/panel to access the support
• Transfer and reuse any model-specific fasteners or clips
• Seat the new support fully and check alignment before reassembly

This magnetron capacitor is the microwave high-voltage capacitor that helps supply the magnetron with the pulse of energy needed to produce heat. Replacing a failing capacitor restores normal heating performance and reduces arcing or loud humming. What it does

• Stores and releases the high-voltage pulse required by the magnetron so the microwave can generate heat.
• Prevents unstable magnetron operation that can cause weak or no heating.
• Common symptoms of a failing capacitor: oven runs but doesn't heat, intermittent heating, loud buzzing/humming, or visible arcing inside the cavity.
• A failed capacitor can also cause blown internal fuses or tripped circuits.

• One capacitor.

• Disconnect power and verify the appliance is completely de-energized before servicing.
• Capacitors can hold dangerous charge; discharge the capacitor safely with an insulated tool.
• Use the exact replacement part and follow the appliance service manual for routing and connections.

This mounting plate anchors the back of an over-the-range microwave to the wall studs, providing the primary support for installation. Replace a bent, damaged, or missing plate to restore a safe, level, and secure mount.

• Provides the rear-wall anchor point the microwave hangs on during installation
• Helps keep the unit level and securely supported under normal use
• Enables proper alignment so top mounting hardware can fasten correctly
• Typical symptoms: can't hang or align the microwave, unit sags/tilts, rear hooks won't engage, plate is bent or corroded

• Disconnect power before beginning
• Use two people to remove/hang the microwave for safety
• Locate wall studs, level the plate, and fasten per your model's installation instructions with the correct hardware
• The microwave's rear tabs fully engage the plate before final tightening

This support is a factory mounting piece that secures and aligns its mating component inside the appliance. Replacing a worn or broken support restores proper fit, stability, and smooth operation of the associated assembly.

• Provides structural support and accurate positioning for the designated part
• Helps prevent sagging, looseness, and vibration
• Maintains alignment so components latch/seat correctly
• Typical failure signs: cracked or missing support, rattling, misalignment, or parts that won't stay in place

• Disconnect power before servicing; also shut off the water supply
• Note the original orientation; transfer any screws, clips, or spacers from the old support
• Install without overtightening to avoid damage; secure fit of the supported component after installation

This magnetron is the microwave's high-voltage tube that generates the microwaves responsible for heating food. Use it as a direct replacement when your microwave powers on but no longer heats properly. What it does:

• Generates the microwave energy that heats and cooks food inside the oven cavity.
• A failing magnetron commonly causes the oven to run but not heat; other signs can include weak or uneven heating.
• Can produce unusual humming, arcing or sparking inside the cavity, or a burning smell when failing.
• Works as part of the high-voltage circuit; other components affect overall function.

• Disconnect power and unplug the appliance before servicing; the high-voltage capacitor must be safely discharged.
• Handle the magnetron carefully by the mounting flange—avoid touching the ceramic antenna or terminals.
• Verify exact part number compatibility with your model before ordering; some repairs require replacing other high-voltage components.

This factory support stabilizes and positions its mating assembly so it stays secure and aligned during use. Replacing a worn or broken support helps restore proper fit and prevents looseness or shifting that can affect performance. What it does

• Provides structural support and correct positioning for the related assembly
• Helps prevent wobble, sagging, rattling, or misalignment
• Typical failure signs: visible cracks, broken/missing tabs, or a loose fit
• Can help resolve components not staying in place or moving unexpectedly

• 1 support

• Disconnect power to the appliance before servicing
• Access the support location and note the original orientation
• Transfer and reuse any original mounting hardware your model uses
• Seat the new support fully and verify a secure fit before restoring power

This Light Housing secures and protects the interior lamp assembly, helping keep the compartment safely illuminated. Replace a cracked or heat-damaged housing to restore a stable bulb fit and consistent lighting performance. What it does:

• Provides a stable mount for the interior light bulb/socket
• Shields nearby wiring and components around the lamp area
• Helps position the light for proper illumination inside the compartment
• Common signs of wear: cracked or melted housing, loose bulb fit, lens/cover won't stay attached, intermittent lighting from a poor physical connection

• 1 light housing

• Disconnect power to the appliance before servicing
• Remove the lens/cover and bulb, then unfasten the damaged housing
• Transfer the existing socket, wiring, and any hardware from the old housing as needed
• Reinstall the housing, replace bulb/cover, restore power, and test the light

This is the appliance's main power cord. It delivers household electricity to the unit so it can operate safely and reliably.

• Supplies AC power from the wall outlet to the appliance's internal wiring
• A damaged or failed cord can cause no power, intermittent power, or tripped breakers
• Replacing a worn cord can restore consistent power and improve safety

• Unplug the appliance and turn off power at the breaker before service
• Route and secure the cord to prevent pinching or abrasion

This replacement screw secures appliance components such as panels, brackets, and covers. Replace a missing or stripped fastener to restore a tight, rattle-free fit and proper alignment. What it does:

• Secures panels, brackets, trim, and internal assemblies in place
• Replaces lost, corroded, or stripped hardware
• Helps reduce vibration and rattling from loose components
• Maintains correct fit and alignment of covers and parts

• One screw

• Disconnect power before servicing; wear appropriate safety gear
• Match the screw to the original location; transfer any washers or clips from the old hardware
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair damaged receiving threads before installing the new fastener

This genuine replacement door handle restores a secure grip and smooth operation to your appliance door. It replaces a worn, cracked, or broken handle so you can open and close the door safely and comfortably. What it does:

• Provides a sturdy handhold for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that cause difficulty operating the door
• Restores proper alignment and fit where the original handle has worn or failed
• Helps reduce accidental slippage or dropping of the door during use

• One door handle

• Handle requires basic hand tools for removal and installation; refer to your model's service instructions
• Keep the appliance unplugged or power disconnected when working near electrical components
• Tighten mounting fasteners securely but avoid over-torquing to prevent cracking
• If the handle mounts to an inner door panel or trim, support the door edge to avoid damage during installation