Wmh310178b-0 Parts

Color: Stainless

Complete, pre-assembled replacement door for select microwaves. It restores proper latch engagement, alignment, and viewing window integrity so the oven closes securely and can start as designed when the original door is cracked, loose, or broken.

• Replaces a damaged or misaligned door to restore safe, reliable operation
• Ensures latch hooks engage the door switches so the unit can run when fully closed
• Pre-assembled for a straightforward swap of the entire door
• Common symptoms: broken handle or frame, cracked window, door won't close, unit won't start due to door not engaging

• Disconnect power before servicing
• Support the door during removal/installation; note hinge orientation
• Transfer any model-specific trim pieces from the original door if needed
• After installation, verify smooth latching and that the microwave starts only when fully closed

The Control Panel is an OEM component for Whirlpool microwaves. Mounted at the front, responsive touch controls empower convenient cooking through an intuitive interface.

Precision-printed graphics clearly label each function along with corresponding capacitive sensors positioned for effortless navigation. Water-resistant construction prevents messes from contacting delicate internal circuitry. 

Causes of failure include scratching or peeling of graphics from extended daily cleaning, as well as faulty contacts from mineral deposits over many years of regular use.

Causes of a bad control panel can include:

• Unresponsive or falsely activated buttons   
• Smudged, scratched, or peeling control labels
• Error messages relating to control malfunctions
• Moisture collecting behind interface seals  

Replace yours with this genuine Whirlpool panel to restore dependable simplicity through each daily meal preparation. Compatible design fits many Kenmore, KitchenAid and some GE microwaves as well.

This inlet cover protects and conceals the appliance's inlet area, keeping wiring and connections secure and helping prevent debris from entering. It restores a clean, safe inlet opening and supports proper component alignment. What it does:

• Shields the inlet opening and nearby connections from dust and debris
• Holds inlet components in position to reduce movement and wear
• Helps prevent snagging or accidental contact with inlet wiring or fittings
• Visible damage or a loose/misaligned cover can expose connections and lead to leaks or electrical issues

• One inlet cover

• Disconnect power and shut off water supply before beginning work
• Remove the appropriate access panel or trim to reach the inlet area
• Replace cover, securing with the original screws or clips; do not overtighten
• Inspect nearby gaskets, fittings and wiring while replacing the cover

Color: Chrome (Qty of 1)

This replacement door handle restores safe, reliable access to your appliance door by replacing a cracked, loose, or broken handle. Simple swap brings back a comfortable grip and normal door operation without replacing the whole door. What it does:

• Provides a secure grip for opening and closing the appliance door.
• Replaces handles that are cracked, loose, broken, or missing mounting points.
• Helps prevent further wear to the door edge and seal caused by using a damaged handle.
• Fits the OEM mounting locations for a direct replacement when the correct part number is used.

• Follow your appliance owner's manual or service guide for model-specific disassembly steps.
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the handle.
• Keep small parts and fasteners organized during installation and verify fit before final tightening.

This control bracket secures the appliance's electronic control or user interface assembly. It provides firm support and proper alignment so the control components mount correctly and remain stable during use.

• Mounts and supports the control or UI assembly inside the appliance
• Maintains alignment of buttons, display, and connectors
• Reduces flexing and vibration that can cause rattles
• Common signs of a failed bracket include a loose or shifting control area, rattling from the console, or visible cracks/broken tabs

• Disconnect power to the appliance before servicing
• Take photos of wiring and component layout to aid reassembly
• Transfer any clips, insulators, or guides from the original bracket to the new one
• Handle nearby electronics with ESD care and do not overtighten fasteners

This lamp cover is the replacement lens that protects and diffuses your oven's interior light, restoring even illumination while keeping the bulb shielded from heat and food residue. It helps maintain safe, usable oven lighting. What it does:

• Protects the oven light bulb from splashes, crumbs and direct contact.
• Diffuses the bulb for more even interior illumination.
• Replaces a cracked, cloudy, melted or missing lens that can cause dim or exposed lighting.
• Fits over the lamp housing to restore the oven's normal light appearance and function.

• Disconnect power to the appliance before starting and allow the oven to cool completely.
• Handle the cover carefully—wear gloves to protect from sharp edges or broken glass.
• Remove any retaining screws or clips, swap the old cover for the new one, then secure the retainer.
• After installation, restore power and replace the bulb if issues persist.

This fixed-temperature thermostat is a temperature-sensing safety switch that opens at a set limit to help prevent overheating and protect heating systems. Use it to restore proper thermal cutoff control in affected appliances. What it does:

• Senses internal temperature and opens the circuit when a set limit is reached to stop heating
• Acts as a high-limit/thermal cutoff to prevent overheating and potential damage
• Can restore normal heating control when a faulty limiter causes shutdowns or safety trips
• Common symptom link: appliance heater runs erratically, will not heat, or heats continuously and may trip safety circuits

• One fixed-temperature thermostat

• Disconnect power to the appliance before inspecting or replacing the thermostat
• Handle and test with care; verify continuity with a multimeter to confirm failure before replacing
• Follow the appliance service manual and wiring diagrams for correct location and wiring

This control panel is the appliance's main console that houses the user controls and display, restoring reliable touch/selection and clear status feedback. It provides the interface needed to select cycles and view settings. What it does:

• Replaces a cracked, unresponsive, or faded console to restore control access and display readability
• Houses button/keypad and display components used to select cycles and options
• Helps resolve symptoms like non-responsive buttons, missing/displayed settings, or intermittent control operation
• Works with the appliance's electronic control system to send user commands

• One control panel/console

• Disconnect power before starting any repair to avoid shock or damage
• Remove adjoining trim and bezels as needed to access mounting screws and electrical connectors
• Handle display and ribbon cables carefully; do not force connectors when disconnecting or reconnecting

This mounting bracket secures internal components to the appliance cabinet, restoring proper alignment and stability. It replaces worn or damaged brackets to reduce vibration and rattling and help fitted panels sit flush. What it does:

• Secures panels or components to the cabinet framework to maintain alignment
• Reduces vibration and noise caused by loose or broken supports
• Helps prevent further wear on adjacent parts by restoring proper fit
• Addresses symptoms such as loose panels, rattling during operation, or misaligned parts

• Disconnect power and, if applicable, water before starting any repair
• Use basic hand tools; hold components in place while installing new bracket
• Tighten fasteners firmly but avoid over-torquing to prevent striping

Color: Black

This refrigerator water filter cartridge replaces the installed filter to help restore clear, better-tasting water and improve ice quality. It's a direct-fit replacement designed for compatible Whirlpool refrigeration systems. What it does:

• Filters water to reduce common impurities that can affect taste and clarity
• Helps improve the quality of ice produced by the refrigerator
• Can resolve symptoms like cloudy water, off-taste, or reduced water flow from the dispenser
• Restores proper filtration performance when the original filter is expired or clogged

• Follow the refrigerator manufacturer's instructions for removal and installation.
• Run and discard the recommended amount of water after installation to flush the system before use.
• Turn off the water supply and disconnect power if required by your model before servicing.
• Inspect the new filter for damage; do not use a damaged filter.

This thermostat is a temperature-sensing limiter that helps regulate and limit appliance heat for safe operation. It restores proper temperature control so the appliance runs within designed operating ranges. What it does:

• Senses internal temperature and opens/closes the circuit to control heating
• Prevents overheating by interrupting power when temperatures exceed safe limits
• Commonly used in dryers and ranges as a safety/temperature control component

• Disconnect power (and gas, if applicable) before servicing to avoid shock or fire
• Handle the sensor and terminals carefully to avoid damage; avoid bending the sensing element
• One thermostat temperature limiter

The Door Assembly is an OEM part for Whirlpool microwaves. It is responsible for safely enclosing the microwave cavity and providing access to cook food. 

Causes of a bad door assembly can include wear and damage over time, such as dents, scratches, or cracks that compromise the integrity of the enclosure. Hinges or latches may become loose or malfunctioning.

Symptoms of a bad door assembly include:

• Difficulty opening or closing the door 
• Door not shutting or latching properly
• Leaks or excessive heat escaping from the door seams
• Damage or deterioration visible on the exterior door surface

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.