Woc54ecoaw02 Parts

This replacement rack restores a stable, level surface for loading items inside your appliance. Replace a damaged or worn rack to keep items secure during operation and maintain smooth, reliable use.

• Provides a sturdy surface to support cookware or dishware during operation
• Maintains proper spacing and alignment inside the cavity
• Interfaces correctly with rails/supports for easy loading and removal
• Replace if wires/tines are broken, coating is rusting, or the rack is bent or unstable

• Disconnect power at the breaker; shut off water supply if applicable
• Remove the old rack carefully, noting orientation and any stop clips
• Transfer any reusable accessories (clips, rollers, tine rows) from the old rack if applicable
• The new rack seats/moves smoothly before returning the appliance to service

The Fuse is an OEM component for Whirlpool microwaves. As a critical safety device, it protects circuits from power surges or overloads that could damage internal electronics. 

The fuse properly calibrates electrical flow through the appliance, preventing excessive currents from traveling between high and low-voltage systems. Its compact design installs discretely but is easily accessible for replacement when needed. 

Causes for blown fuses include voltage spikes from power outages, faulty door interlocks energizing the magnetron with the door open, or short circuits due to loose wires or water intrusion over time.

Causes of a bad fuse can include:

• Repeatedly blowing when the appliance is in use  
• No power to any microwave functions
• Tripped circuit breakers upon turning on the microwave
• Discoloration or physical damage to the fuse body

Compatible with microwave models from Maytag, Magic Chef, Admiral, and more for consistent, worry-free operation.

The Blower is an OEM part for Whirlpool ranges. It is responsible for cooling down the internal parts of the range during operation, preventing overheating. This cooling fan blower motor circulates air, dissipating heat and maintaining a safe operating temperature for the range. It helps to extend the lifespan of the range and prevents potential damage caused by excessive heat buildup.

A bad cooling fan blower motor can occur due to wear and tear or electrical malfunctions. If you notice symptoms such as loud or unusual noises coming from the range, failure of the cooling fan to operate, or overheating issues, it may be time to replace the blower motor.

Symptoms of a bad cooling fan blower motor include:

• Loud or unusual noises coming from the range
• Failure of the cooling fan to operate
• Overheating issues with the range

Restore your range by replacing the faulty or worn-out cooling fan blower motor with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This is a genuine lock nut replacement. This is a general piece of hardware that is often used on several types of lawn and garden equipment, including in engines, housing, and other areas. The exact application of this part will vary based on the unit. The lock nut is used to create a more secure seal than a standard nut. When properly secured, the lock nut tightens to a bolt and uses an extra locking washer with teeth to ensure a snug fit.If lock washers do get damaged or lost, they need to be replaced immediately with a genuine OEM replacement. This model is compatible with all types of machines and units since it is a generic part. The washer is sold as an individual part and manufactured by Whirlpool. Lock nuts will need to be installed using a socket wrench or adjustable wrench. Pliers, a screwdriver, or another socket wrench will be needed to hold the bolt while the lock nut is being secured in place. Be sure to thread the lock nut carefully to ensure a strong seal and avoid stripping the bolt or the nut.

Bottom vent assembly channels heated air from the oven cavity out the appliance base, protecting internal components and restoring proper ventilation. Replace a damaged lower vent to help maintain safe airflow and cabinet temperatures. What it does:

• Channels hot oven air out the appliance base to help keep controls and components cooler.
• Shields the oven cavity from debris and helps maintain proper airflow.
• Common replacement signs: cracked, broken or warped vent pieces, visible gaps at the lower vent opening, or excessive heat at the cabinet base.
• Fits as the lower/front vent that mounts beneath the oven cavity.

• Disconnect power (unplug or switch off the breaker) before servicing the appliance.
• Removal of the oven drawer or lower access panel and a few mounting screws is typically required; retain all hardware for reassembly.
• Inspect surrounding tabs, clips, and mounting areas and replace any damaged fasteners for a secure fit.

This electronic control board manages the appliance's user controls, timing and electronic functions so cycles run correctly and settings respond properly. Replacing a failed board restores normal control and cycle operation. What it does:

• Receives input from buttons/knobs and runs the selected cycles and features
• Communicates with sensors and other modules to control timing and operations
• Powers and drives the display and indicator lights
• Common symptoms: blank or unresponsive controls, non-starting unit, erratic cycles, or persistent error codes

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the board by edges and avoid static discharge; use anti-static precautions
• Verify connectors and mounting points match the old board before final installation

This block-style fuse holder secures and connects the appliance fuse to the wiring harness, restoring a safe electrical connection and thermal protection. Use it when the original fuse block is cracked, corroded, or no longer holding the fuse securely. What it does:

• Holds and connects the appliance fuse to the wiring harness so the thermal/overload fuse can function.
• Restores reliable electrical contact when the original block is cracked, melted, or corroded.
• Addresses symptoms such as intermittent power, no heat, or appliance not starting when caused by a bad fuse connection.
• Works with the existing fuse and wiring—does not replace the fuse itself.

• Disconnect power to the appliance before inspecting or replacing this part.
• Replace any damaged wiring, connectors, or insulation found during replacement; do not cut corners or bypass thermal safety devices.

This 10-32 x 3/8 machine screw secures appliance components. It keeps panels, brackets, and trim firmly attached so everything stays aligned and quiet during operation.

• Fastens metal parts using a 10-32 thread in pre-tapped holes or with a matching 10-32 nut
• Maintains proper alignment of panels, brackets, and trim to reduce vibration and rattling
• Replace if the original screw is missing, stripped, rusted, or damaged
• Using the correct hardware helps restore a secure, factory-tight fit

• Disconnect power; shut off gas supply if applicable. Allow the appliance to cool completely before servicing
• Note screw locations/lengths and replace like-for-like
• Start threads by hand to avoid cross-threading; snug with the appropriate driver—do not overtighten
• If the receiving threads are damaged, repair or replace the mating component before installing

This replacement cookware piece restores a missing or damaged pot or pan used with compatible Whirlpool cooking appliances, letting you safely resume everyday stovetop cooking with a correct-fit, OEM-style component. What it does:

• Replaces worn, damaged, or missing cookware used on compatible Whirlpool ranges or cooktops
• Provides a usable cooking surface for boiling, simmering, frying, and other stovetop tasks
• Helps eliminate symptoms like unusable or unstable cookware, excessive warping, or compromised nonstick surfaces
• Matches OEM form and function so controls and heat sources work as intended

• Only install when the appliance and cooktop are cool and power is disconnected
• Verify the part number and fit against your appliance before installation
• Follow the appliance owner's manual and OEM instructions for placement and use
• Do not use cookware with damaged bottoms or compromised nonstick surfaces; discard if safety is in question

This replacement grommet restores a tight, cushioned pass-through where a hose, tube, or wire enters your appliance. It helps prevent leaks and rattles while protecting components from chafing so the unit operates smoothly.

• Creates a snug, leak-resistant seal at an opening
• Isolates vibration to reduce noise and wear
• Shields hoses/wires from abrasion on sharp edges
• Replaces a grommet that is cracked, flattened, brittle, or missing
• Common symptoms: dripping at a connection, vibration/rattling, or a loose fit

• Disconnect power and turn off water supply, if applicable, before servicing
• Access the location and note the grommet's orientation and depth
• Remove the old grommet and clean the opening or mating surfaces
• Press the new grommet fully into place; reassemble and test for leaks or noise

This lens-lamp assembly replaces a damaged or missing interior light lens and lamp, restoring clear, protected illumination inside the appliance. It provides a covered light source that reduces glare and shields the bulb from food and debris. What it does:

• Covers and protects the appliance interior light bulb from spills, splashes, and impact
• Diffuses light for more even interior illumination
• Restores proper visibility when the original lens is cracked, cloudy, or missing
• Helps prevent direct exposure to the bulb, improving safety during use

• One lens-lamp assembly

• Disconnect power to the appliance before starting any repair
• Allow the bulb to cool before handling; wear gloves to protect hands and avoid fingerprints on bulb
• Test the light function after installation to ensure proper fit and operation

The Console is an OEM part for Whirlpool wall ovens. It is the interface panel housing control knobs and display lights.

Causes of a bad console can include cracked or peeling finishes, faulty knobs, burned-out display lights, or moisture damage over time.

Symptoms of a bad console include:

• Control knobs difficult to turn or unresponsive 
• Burned-out or non-illuminated indicator lights
• Warped or cracked plastic casing
• Moisture infiltration behind controls

As one of the major touch points for users, the console endures constant adjustment of settings during cooking. Over years of repeated heating cycles, consoles can experience wear and finish degradation. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White

This glass support bracket secures a stove/oven or appliance glass panel in place to prevent movement and ensure proper alignment. It replaces worn or broken brackets to help stabilize the glass and reduce noise or rattling. What it does:

• Holds a glass panel or trim securely to the appliance frame
• Restores proper glass alignment and prevents uneven gaps
• Stops rattling or vibration caused by a loose or broken bracket
• Helps maintain safe, stable placement of the glass during use

• One glass support bracket

• Disconnect power and let surfaces cool before beginning work
• Handle glass carefully; support the panel to avoid dropping or cracking
• Use correct fasteners and avoid over-tightening to prevent glass stress
• Replace the glass along with damaged hardware if the glass is cracked or chips are present.

This wide interface board is the appliance's user-facing electronic control that receives touchpad/input signals and communicates with the main control to run cycles. Replacing a faulty board restores control responsiveness and display feedback. What it does:

• Controls user inputs from the console and relays commands to the appliance control system
• Manages display outputs and status indicators for cycle selection and time remaining
• Can resolve symptoms like unresponsive buttons, blank or erratic display, or incorrect cycle selections
• Works as the console-level communication link between the user interface and the main control board

• One wide interface electronic control board

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Handle the board by the edges and avoid contact with circuit traces or components; observe ESD precautions
• Verify connector seating and orientation during reassembly; do not force connectors

This cover is a replacement cabinet trim piece that protects internal components and helps maintain the appliance's appearance. It restores a finished look and shields wiring and parts from incidental contact. What it does

• Covers and protects internal components and wiring from debris and accidental contact
• Restores the appliance's finished exterior where the original cover is cracked, broken, or missing
• Stops rattling or loose-panel noise when a damaged cover is removed
• Helps prevent small items from entering internal compartments

• Disconnect power to the appliance before beginning any service.
• Installation typically requires removing adjacent trim or panels; keep fasteners for reuse.
• Handle carefully to avoid scratching the finish; wear gloves if needed.