Wod51ecoaboo Parts

Bottom vent assembly channels heated air from the oven cavity out the appliance base, protecting internal components and restoring proper ventilation. Replace a damaged lower vent to help maintain safe airflow and cabinet temperatures. What it does:

• Channels hot oven air out the appliance base to help keep controls and components cooler.
• Shields the oven cavity from debris and helps maintain proper airflow.
• Common replacement signs: cracked, broken or warped vent pieces, visible gaps at the lower vent opening, or excessive heat at the cabinet base.
• Fits as the lower/front vent that mounts beneath the oven cavity.

• Disconnect power (unplug or switch off the breaker) before servicing the appliance.
• Removal of the oven drawer or lower access panel and a few mounting screws is typically required; retain all hardware for reassembly.
• Inspect surrounding tabs, clips, and mounting areas and replace any damaged fasteners for a secure fit.

This 10-32 x 3/8 machine screw secures appliance components. It keeps panels, brackets, and trim firmly attached so everything stays aligned and quiet during operation.

• Fastens metal parts using a 10-32 thread in pre-tapped holes or with a matching 10-32 nut
• Maintains proper alignment of panels, brackets, and trim to reduce vibration and rattling
• Replace if the original screw is missing, stripped, rusted, or damaged
• Using the correct hardware helps restore a secure, factory-tight fit

• Disconnect power; shut off gas supply if applicable. Allow the appliance to cool completely before servicing
• Note screw locations/lengths and replace like-for-like
• Start threads by hand to avoid cross-threading; snug with the appropriate driver—do not overtighten
• If the receiving threads are damaged, repair or replace the mating component before installing

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

This part is a wall oven control board. It is a hub that allows the user to make heating and temperature selections for the oven.The control board may need to be replaced if the wall oven is not heating or does not seem to be properly regulating its temperature. These problems can also be caused by other faulty parts in the oven, so it is best to locate the control board inside the oven and look for any burn spots or broken wires within the control board. If there are burn spots or broken wires, the control board should be replaced. Before replacing this part, ensure the oven is unplugged from its power source in the wall. Gloves should also be worn when performing this repair.The item is designed for Whirlpool and Maytag machines, and this wall oven control board is sold as a single unit. It is an authentic OEM replacement part that is directly sourced from the manufacturer.

This replacement grommet restores a tight, cushioned pass-through where a hose, tube, or wire enters your appliance. It helps prevent leaks and rattles while protecting components from chafing so the unit operates smoothly.

• Creates a snug, leak-resistant seal at an opening
• Isolates vibration to reduce noise and wear
• Shields hoses/wires from abrasion on sharp edges
• Replaces a grommet that is cracked, flattened, brittle, or missing
• Common symptoms: dripping at a connection, vibration/rattling, or a loose fit

• Disconnect power and turn off water supply, if applicable, before servicing
• Access the location and note the grommet's orientation and depth
• Remove the old grommet and clean the opening or mating surfaces
• Press the new grommet fully into place; reassemble and test for leaks or noise

Color: White

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

This glass support bracket secures a stove/oven or appliance glass panel in place to prevent movement and ensure proper alignment. It replaces worn or broken brackets to help stabilize the glass and reduce noise or rattling. What it does:

• Holds a glass panel or trim securely to the appliance frame
• Restores proper glass alignment and prevents uneven gaps
• Stops rattling or vibration caused by a loose or broken bracket
• Helps maintain safe, stable placement of the glass during use

• One glass support bracket

• Disconnect power and let surfaces cool before beginning work
• Handle glass carefully; support the panel to avoid dropping or cracking
• Use correct fasteners and avoid over-tightening to prevent glass stress
• Replace the glass along with damaged hardware if the glass is cracked or chips are present.

This console is the oven control panel assembly that holds the user controls and display, restoring proper button access and a finished front appearance. It replaces a cracked, faded, or unresponsive control area to make the range usable again. What it does:

• Provides the exterior control surface and housing for oven/clock controls and display
• Replaces a cracked, damaged, or cosmetically worn console that interferes with button use
• Restores secure mounting and alignment of control buttons and trim
• Can resolve issues where touchpads or push-buttons do not actuate due to physical damage

• One console (control panel) assembly as shown

• Disconnect power to the appliance before starting any repair
• Remove any trim and mounting screws; handle with care to avoid scratching the finish
• Reconnect wiring harnesses exactly as removed; ensure connectors are fully seated

Adjustable leveling foot that stabilizes and levels your appliance on uneven floors to stop rocking and improve overall stability. Simple replacement for a worn or damaged foot to restore a solid, level setup. What it does:

• Threads into the appliance base to support weight and set the appliance height
• Lets you level the appliance to stop rocking or tilting on uneven floors
• Helps reduce vibration and shifting during operation
• Common symptom fix: appliance wobbles, is unlevel, or rocks when pushed

• Disconnect power and pull appliance away from the wall before working underneath
• Support the appliance so it cannot tip; adjust the foot by turning until the unit is level
• Recheck level front-to-back and side-to-side; tighten any retaining hardware if present
• If rusted or stuck, use penetrating lubricant and proper tools; avoid forcing parts in a way that could damage the cabinet

A genuine replacement mounting screw that secures appliance panels and components to restore proper fit and reduce vibration. Use this screw to replace missing or damaged fasteners for a secure, rattle-free repair. What it does:

• Fastens panels, brackets, or components to the appliance frame
• Restores proper alignment and reduces rattling or vibration
• Prevents parts from coming loose during operation
• Works wherever the OEM screw W10828565 is specified

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Install only where the OEM screw is specified; do not overtighten
• Replace any stripped or damaged screws with this exact part

This welded liner assembly replaces a damaged or corroded oven cavity liner to restore the oven's interior structure and heat containment. It provides a factory-fit replacement for ovens that require a single-piece welded liner. What it does:

• Replaces a warped, cracked, or rusted oven cavity liner to improve structural integrity
• Helps maintain even heat distribution by restoring the oven's original interior surface
• Reduces heat loss from the cavity and helps protect insulation and exterior panels
• Matches OEM fit and mounting points for straightforward refit

• 1 welded oven liner assembly

• Installation requires removing the oven from its enclosure; disconnect power before service
• Handle carefully to avoid scratching the finished surfaces; wear gloves to protect from sharp edges
• Verify all mounting hardware and seals are present and in good condition before final reassembly

Color: Citrine white. Size: 4.5 oz. can. Acrylic appliance aerosol can spray paint.

Color: White. Size: 13 oz. Spray paint primer. can.

The Foot Level is an OEM part for Whirlpool wall ovens. It sits at the base of the oven and incorporates adjustable feet, rollers, or glides. The foot level allows for precision leveling and balancing of the oven once installed.

Symptoms of a bad or damaged foot level include: 

• The oven rocking or wobbling noticeably during use
• Excessive stress on the oven door or improper door alignment 
• Screeching or scraping noises coming from the foot-level area 
• Visible damage, bending, or instability of the feet, rollers, or glides
• Inability to properly level or balance the oven for optimal performance

This genuine replacement foot level from Whirlpool restores stability and efficiency. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and select Kenmore wall ovens to ensure they sit firmly and operate smoothly.

This console is the replacement control panel top that houses the appliance's buttons and display, restoring the user interface and protecting the underlying electronics for reliable operation and a clean appearance. What it does

• Provides the exterior housing for the control buttons, knobs, and display so you can select cycles and settings.
• Protects the internal control board and wiring from dust, moisture, and impact.
• Re-establishes a stable interface when cracked, warped, or cosmetically damaged.
• Common symptoms that may indicate a faulty console: unresponsive or hard-to-press buttons, visible cracks or warping, or a loose/unstable front panel.

• One replacement console top panel.

• Disconnect power (unplug or shut off circuit breaker) before starting any work.
• Handle carefully to avoid scratching the face and to protect any attached lens or display.
• Basic hand tools are typically required.