Wos51ecoas Parts

Size: 8abx3/8 - blk)

This is a replacement 8-18 screw used to secure components in compatible Whirlpool appliances. It provides a reliable, corrosion-resistant fastener to restore proper fit and function for panels and internal parts. What it does:

• Secures panels, brackets, or small internal components where an 8-18 thread is specified
• Restores loose or missing fasteners that cause rattling, misalignment, or improper sealing
• Matches OEM thread size and head profile for a correct fit when listed for your model
• Prevents further wear or damage caused by using the wrong screw size

• One screw as shown

• Turn off and unplug the appliance before starting any repair
• Use the proper screwdriver or driver bit to avoid stripping the head
• Do not overtighten—tighten until snug and components seat without play
• Replace only where the OEM specifies an 8-18 screw to ensure proper fit

This spacer provides a small, rigid gap between appliance components to maintain proper alignment and prevent contact. It restores correct spacing so panels, doors, or assemblies fit and move as intended. What it does:

• Maintains proper clearance between parts to prevent rubbing, binding, or wear
• Helps align panels, trim, or assemblies for smooth operation
• Supports fasteners or clips to ensure a secure fit
• Can reduce vibration-related noise when spacing is correct

• One spacer

• Disconnect power or gas before servicing the appliance
• Inspect mounting area and fasteners; replace any worn clips or screws as needed
• Install in the original orientation; do not force into place or over-tighten fasteners

This replacement console is the outer control panel that holds the range/stove controls and display, restoring a clean appearance and secure mounting for the control assembly so buttons, knobs, and the display function and align properly. What it does:

• Provides the exterior housing and mounting surface for the oven/cooktop control board and user interface
• Keeps controls and display secured and protected from spills and impact
• Restores proper alignment of buttons, switches, and knobs for reliable user input
• Helps eliminate issues caused by cracked, warped, or damaged front panels and mounting tabs

• Disconnect power before servicing; follow basic electrical safety procedures
• Removal typically requires accessing fasteners from the back or underside of the console
• Some internal parts (control board, overlays, buttons, knobs, mounting clips) may need to be transferred from the old console

A 6-32 machine screw used to secure panels, brackets, and components in many Whirlpool appliances. Replaces worn or missing fasteners to restore proper fit and stop loose parts from rattling or shifting. What it does:

• Secures panels, trim, brackets, and small assemblies
• Helps stop vibration and rattling caused by loose fasteners
• Restores proper alignment for parts held by a 6-32 thread
• Prevents further wear from movement or improper fit

• Disconnect power to the appliance before beginning any repair
• Use the correct driver for the screw head to avoid stripping
• Thread gently and avoid overtightening to prevent damage to threads or components
• Keep removed fasteners organized to ensure correct reassembly

This indicator light is a small control-panel lamp that signals oven/cooktop status and helps you know when elements or functions are active. It restores visible status indication for better, safer operation. What it does:

• Illuminates the control panel to show when a function or heating element is on
• Commonly used as a power/status indicator on ranges and cooktops
• Fixes symptoms like a dark or non-responsive status light on the appliance
• Helps when controls or timed functions are active

• One indicator light

• Disconnect power to the appliance before beginning any work to avoid shock
• Handle the lamp carefully; avoid force — some panels or bezels must be removed first
• Replace with the exact OEM part number to ensure correct fit and function
• After installation, restore power and verify the light operates with appliance functions

This control panel is the user interface assembly that houses the oven's touchpads and display so you can select cooking modes and view settings. It replaces a damaged or unresponsive console to restore normal control and display functions. What it does:

• Provides the front-facing buttons/touchpads and display used to set oven temperature, timers, and cooking modes.
• Sends user commands to the oven control board so functions start when selected.
• Commonly replaced for symptoms such as unresponsive buttons, missing/blank display segments, or incorrect readouts.
• Restores reliable input and clear status feedback when the original panel is cracked, worn, or faulty.

• One control panel/user interface assembly

• Disconnect power to the appliance before attempting any repair to avoid shock or damage.
• Basic hand tools are typically required; some models may require removal of the oven door or back panel.
• Handle the display and ribbon connectors carefully to avoid damage; confirm connector seating during reassembly.

Color: Stainless

This door hinge is a replacement hinge that restores proper door alignment and secure operation so the appliance door opens and closes smoothly. Fits the factory hinge mounting and matches OEM form and function. What it does

• Re-establishes correct door alignment to prevent sagging or gaps
• Helps the door latch and seal properly for consistent closing
• Reduces rubbing, binding, or squeaking during door movement
• Restores smooth, predictable hinge rotation and support

• Use basic hand tools; follow the appliance manufacturer's disassembly instructions.
• Support the door while removing/installing the hinge to prevent dropping or damage.
• Replace only the hinge(s) specified for your model.
• Disconnect power and remove perishable contents from the appliance if needed for safe access.

This trim vent is the exterior trim piece that finishes the appliance vent opening and helps direct airflow for proper operation and appearance. It replaces damaged, cracked, or missing vent trim to restore a clean, sealed fit. What it does

• Covers and protects the vent opening while directing airflow away from the cabinet
• Helps reduce visible gaps and prevents excess lint or debris buildup around the vent
• Restores a finished look when the original trim is cracked, warped, or broken
• Contributes to quieter operation by keeping the vent area properly seated

• Disconnect power to the appliance before beginning any work
• Typically snaps or screws into place; align the tabs and press until seated or secure with existing fasteners
• Use hand tools only and avoid forcing the part; replace any damaged clips or screws

This oven vent directs hot air and steam away from the oven cavity to help maintain proper airflow and protect surrounding components. It replaces a failed or damaged vent to restore safe venting and oven performance. What it does:

• Guides exhaust air and steam out of the oven cavity to help reduce internal moisture and heat buildup
• Helps prevent heat and grease from reaching control panels and adjacent cabinetry
• Restores proper airflow when a cracked, warped, or missing vent causes visible leaks or uneven oven temperatures
• Matches OEM fit to ensure correct alignment with the oven front

• One oven vent/vent trim

• Disconnect power to the appliance before starting any repair
• Allow the oven to cool completely and remove any racks or accessories in the way
• Replacement typically requires removing the oven door or front trim panel for access; follow factory service instructions

This wire harness provides the factory-style electrical connections needed to restore secure, organized wiring in your appliance. Replacing a damaged harness helps re-establish reliable power and signal paths for controls and components. What it does:

• Connects multiple internal components with pre-terminated wiring and color-coded connectors
• Ensures correct signal and power routing between control boards, switches, and motors
• Commonly used to address intermittent power, loss of functions, or components that don't respond
• Keeps wiring bundled and secured to prevent chafing or short circuits

• Disconnect power (unplug or switch off breaker) before starting any repair
• Match connector shapes and wire colors; route and secure harness along the original path
• Inspect connectors and insulation; replace the entire harness if any wire or terminal is damaged