Wrf5555dhv01 Parts

This black plastic corner cover replaces a damaged or missing exterior trim piece to restore the appliance's finished appearance and protect internal edges from dirt and wear. Fits the factory location and matches original styling. What it does:

• Covers and protects the appliance corner or trim area from chips, scuffs, and debris.
• Restores a clean, finished look where the original corner piece is cracked, broken, or missing.
• Helps keep moisture and grime from reaching internal seams at the corner.
• Matches the original color and shape to maintain the appliance's aesthetic.

• Install with the appliance powered off and unplugged for safety if cover removal exposes wiring.
• Remove any broken fragments and clean the mounting area before installing the new cover.
• May snap or screw into place depending on model; keep fasteners from the original cover for re-use.

This fan scroll is the blower housing that directs airflow from the blower motor to the appliance's ducts, helping maintain proper circulation. It replaces a damaged or warped housing to restore efficient airflow and reduce noise. What it does:

• Channels air from the blower motor into the appliance air path for cooling or venting.
• Helps maintain consistent temperatures and airflow for proper operation.
• Can reduce vibration or rubbing noises caused by a cracked or deformed housing.
• Supports the blower motor assembly and seals the motor-to-duct interface.

• One fan scroll / blower housing.

• Disconnect power to the appliance before starting any repair.
• Installation may require removal of the blower motor and nearby panels; handle motor and impeller carefully.
• Inspect and reuse or replace any required mounting hardware, gaskets, or seals as needed—only what explicitly ships is included.
• If you hear unusual noises after installation, recheck alignment and clearance between the impeller and the scroll.

This replacement cover protects and conceals the appliance's control board and related electronics, helping prevent debris intrusion and accidental contact. It restores the appliance's original internal protection and appearance. What it does

• Shields the control board and wiring from dust, lint, and small debris
• Helps prevent accidental contact with electrical components
• Maintains proper component placement and internal airflow paths
• Useful when repairing or replacing control assemblies or wiring

• One replacement cover

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove access panels as needed to access the control area; handle panels gently to avoid breaking tabs
• Align the cover with mounting points and secure with original fasteners; do not overtighten
• If you see damaged wiring or connectors, stop and address electrical damage before reassembling

The Midnight Grey Appliance Touchup Paint is an OEM touchup paint that is specifically designed for use with Whirlpool appliances. It is the perfect solution for covering up any scratches, chips, or blemishes on the surface of your appliance, restoring its original appearance. 

Causes of scratches or chips on your appliance's surface can include accidental impacts, wear and tear over time, or mishandling. These imperfections can not only affect the aesthetic appeal of your appliance but also leave it vulnerable to further damage.

Symptoms of a damaged appliance surface include:

• Visible scratches or chips
• Discoloration or uneven appearance
• Exposed metal or other materials

Restore your appliance by using this genuine OEM touchup paint to cover up any imperfections. Simply apply to the affected area and let it dry for a flawless finish.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This right top hinge cover protects and conceals the refrigerator door hinge for a clean finish and safer access. It restores appearance and keeps the hinge area free from dirt and accidental contact. What it does:

• Covers the top right door hinge to hide hardware and improve aesthetics
• Shields the hinge from dust, debris and incidental contact that can cause wear
• Prevents sharp or moving hinge parts from catching on clothing or items
• Useful when the original cover is cracked, broken, or missing

• One right top hinge cover

• Remove any items from the door and support the door before removing hinge components
• Use basic hand tools; avoid forcing parts or overtightening fasteners
• Wear gloves to protect hands from sharp edges and to keep the cover clean

Color: White. Size: 1 qt. can. Acrylic appliance paint.

Size: 63-1/2 x 35-1/2 x 2-5/8 inch.

This door hinge is a direct-fit replacement part that restores proper door alignment and smooth opening/closing for compatible Whirlpool appliances. Replacing a worn or damaged hinge helps prevent door sag, gaps, and uneven sealing. What it does

• Supports and pivots the appliance door so it opens and closes smoothly
• Restores correct door alignment to ensure an even seal and temperature retention
• Stops door sagging or misalignment that can cause rubbing or uneven wear
• Reduces noise or binding during door movement when the hinge is worn

• Unplug the appliance or disconnect power before beginning any repairs.
• Support the door while removing or installing the hinge to prevent damage or injury.
• Keep original mounting hardware; use proper tools and basic mechanical skills.
• After installation, check door alignment and operation; adjust as needed for a tight, even seal.

This shelf cant bracket is a direct-fit support bracket that restores proper shelf positioning and stability in compatible refrigerators. It replaces a broken or worn cant bracket so shelves sit level and stay secured during use. What it does:

• Replaces a damaged or broken shelf cant bracket that lets the shelf tilt or sag
• Supports the shelf edge to keep items stable and prevent sliding or falling
• Commonly used when shelves shift, droop, or no longer lock into place
• Simple replacement that restores original shelf alignment and support

• Disconnect the appliance from power before starting any repair to avoid injury
• Remove the affected shelf according to the owner's manual before replacing the bracket
• Snap or screw the replacement bracket into the shelf rail or frame as required; retain any original fasteners unless the new part includes them

This freezer basket is a replacement storage bin that organizes frozen foods and keeps items accessible. It restores usable freezer space and helps prevent loose items from shifting or blocking airflow inside the compartment. What it does:

• Holds and organizes frozen foods for easy access and stacking
• Keeps smaller or loose items contained to prevent shifting during drawer movement
• Helps maintain airflow by keeping items off walls and away from vents
• Replaces cracked, warped, or missing baskets that can snag or spill contents

• One freezer basket assembly

• Unplug the appliance or disconnect power before beginning work
• Empty the freezer section and remove any shelves or drawers that obstruct access
• Slide the basket into the existing rails or support ledges until it seats; avoid forcing it
• If fasteners or brackets are present, reinstall them securely; inspect rails/holders for damage

This plastic filter cover protects the dishwasher's filter and sump, helping keep food and debris out of the pump while directing wash water through the filter area for proper draining and cleaning performance. What it does:

• Covers and secures the filter/sump area so debris is trapped before reaching the pump
• Helps channel wash water through the filter for effective filtering and draining
• Reduces risk of pump clogs and noisy operation from loose debris
• Commonly replaced when cracked, warped, or not seating properly which can cause poor draining or food re-deposit

• Disconnect power to the appliance before performing any service
• Remove the lower rack and lift out the filter assembly to access the cover
• Inspect and clean the filter and sump area before installing the new cover
• Refer to the appliance's diagram for correct orientation and fastening

The Ice/Water Paddle is an OEM part for Whirlpool refrigerators. It is the internal component responsible for dispensing crushed ice and water through the exterior dispenser. Designed to fit securely within the refrigerator doorway, the ice/water paddle utilizes a simple, mechanical operation to efficiently deliver selections.  

Symptoms of a bad ice/water paddle include:

• Improper or inconsistent dispensing of ice or water
• Jamming or sticking occurring during use  
• Visible wear or damage to the paddle mechanism

Causes of a bad paddle can be regular wear and tear over time, a buildup of residue inhibiting movement, or damage from impact or misuse. Replacing it with this genuine Whirlpool OEM part restores optimum performance to the dispenser system.

This replacement paddle is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore home appliances. 

This water filter cover secures and seals the refrigerator's replaceable water filter, helping maintain correct water flow and prevent leaks. It restores a snug fit after filter changes for reliable dispensing. What it does:

• Secures the replaceable water filter in its housing and holds it in place
• Seals the filter area to help prevent water leaks around the filter
• Directs water through the filter for proper flow and filtration
• Can resolve symptoms like a loose or unseated filter, leaks near the filter housing, or difficulty installing the filter

• Turn off the refrigerator water supply and dispense remaining water before starting
• Remove the existing filter per manufacturer instructions, then position and snap or twist the cover into place
• Inspect filter O-rings and housing for damage; replace damaged seals before reinstalling