Wrf560seywoo Parts

This thermostat retainer clip secures the defrost thermostat to the evaporator tubing in your refrigerator or freezer, maintaining firm contact for accurate temperature sensing and dependable defrost operation.

• Holds the thermostat firmly against the evaporator line for proper temperature feedback
• Helps prevent a loose or dangling thermostat that contribute to frost buildup and poor defrost performance
• Restores correct mounting when the original clip is cracked, bent, or missing
• Common signs include a broken clip or a thermostat not attached to the coil

• Disconnect power to the appliance before servicing; wear cut-resistant gloves
• Access the evaporator compartment; remove accumulated frost/ice as needed without prying on coil fins
• Position the thermostat body flat against the tubing and snap the retainer over it, avoiding pinched wires or damaged fins
• Confirm a secure fit and proper wire routing before reassembling and restoring power

This toe grille covers the lower front of your refrigerator and allows proper ventilation to the condenser compartment. Replacing a cracked or missing grille restores a clean, finished look while helping maintain clear airflow at the base.

• Covers and finishes the lower front opening of the cabinet
• Directs intake air to the condenser area for correct ventilation
• Helps keep debris from entering the compartment under the unit
• Common symptoms: visible cracks or broken tabs, grille won't stay attached, missing piece, rattling at the base

• Disconnect power and wear work gloves for safety
• Remove the old grille by releasing side clips or removing the mounting screws (varies by model)
• Align the new grille and press to engage clips or reinstall screws; ensure it's secure and unobstructed
• Keep the front vent area clear after installation to maintain airflow

Made by Whirlpool. This kit includes 15 feet of copper tubing, saddle valve, teflon tape, and tubing connector. Use this kit to connect your refrigerator ice maker to water supply (usually your water shut off valve under the kitchen sink).

A direct-replacement electrical socket that restores a secure connection for a single appliance component. Replacing a worn or damaged socket helps stop intermittent power, flickering lights, or loss of function in affected circuits. What it does:

• Provides a secure electrical connection between the appliance wiring and the component it serves.
• Holds and aligns the mating connector or bulb so contacts meet reliably.
• Restores consistent power transfer when a brittle, corroded, or loose socket causes intermittent operation.
• Common symptom: component or light works intermittently, only when jostled, or not at all.

• One replacement socket

• Always disconnect power (unplug appliance or shut off breaker) before inspecting or replacing electrical parts.
• Inspect surrounding wiring and connector for heat damage; replace harnesses if insulation is compromised.
• Use basic hand tools to remove and reinstall; ensure contacts are fully seated and fasteners are secure.

Size; 8-18 x 1/2 inch.

This hose clamp secures a rubber or plastic hose to its fitting on your appliance, maintaining a tight, leak-resistant seal under vibration and pressure. Replace when the old clamp is rusted, bent, or no longer holds tension. What it does:

• Clamps around a hose to grip the fitting and seal the joint
• Helps prevent drips, leaks, and hose blow-off at the connection
• Restores secure clamping force when the original is worn or damaged
• Common symptoms: water at the connection, hose slipping off, visible corrosion or distortion

• 1 hose clamp

• Disconnect power and shut off the water supply before servicing
• Slide clamp onto hose, seat hose fully on the fitting, then position clamp just behind the bead/raised lip
• Tighten or compress evenly with the appropriate tool; avoid overtightening that could damage the hose
• After reassembly, run a short test and inspect for leaks

Replacement drip tray in white that installs under the appliance to collect spills and direct water away from internal components, helping prevent damage and making cleanup easier. What it does:

• Catches leaks, drips and overflow to protect the cabinet and floor.
• Directs water away from controls and electrical components to reduce risk of damage.
• Replaces cracked, warped or discolored trays that no longer hold water.
• Helps limit staining and makes routine cleanup faster.

• Disconnect power to the appliance before starting any work.
• Access the tray by removing the lower access panel or kickplate as required for your model.
• Remove the old tray and slide or snap the replacement into place; avoid forcing parts.

A center hinge spacer that positions and centers the door hinge for proper alignment and smooth operation. Replaces a worn or missing spacer to help restore correct door spacing and reduce sag or rubbing. What it does:

• Keeps the center hinge at the correct distance to maintain door alignment and even gaps.
• Helps the door open and close smoothly by preventing metal-on-metal contact.
• Reduces door sag, uneven closing, and rubbing along the cabinet.
• Protects hinge components from premature wear by maintaining correct spacing.

• Disconnect power to the appliance and remove any contents from the door before starting.
• Support the door while loosening or removing hinge fasteners to prevent injury or damage.
• Install the spacer in the same orientation as the original; replace any damaged screws or hardware.
• Tighten fasteners securely but avoid overtightening; check door alignment and operation after installation.

This door hinge secures and guides a refrigerator/freezer door so it opens and closes smoothly. Replacing a worn hinge restores proper door alignment and helps prevent gaps that affect cooling performance. What it does:

• Supports the weight of the appliance door and holds it on its track
• Guides door swing so the door opens and closes evenly
• Helps maintain a tight seal to prevent air leaks and cooling loss
• Common symptoms: door sagging, uneven gap, rubbing or scraping at the door edge, or a door that won't stay closed

• Unplug the appliance or turn off power before starting work
• Support the door while removing hinge fasteners to prevent dropping or damage
• Keep all original screws; verify fit and orientation before final tightening
• Consider a second person for assistance if the door is heavy or alignment is difficult

This wire assembly connects and powers the ice maker so it can cycle and make ice. It replaces a damaged or disconnected ice-maker harness to restore electrical continuity and reliable ice production. What it does

• Provides the electrical connections between the ice maker and the freezer wiring harness
• Restores power to the ice maker when factory wiring is frayed or broken
• Helps stop intermittent or complete ice-maker failure caused by damaged connectors or wiring
• Supports proper communication for fill and harvest cycles when installed correctly

• One wire assembly for the ice maker

• Disconnect power to the refrigerator before starting any repair
• Access may require removing freezer shelves/panels and the ice maker module per OEM instructions
• Match connector shapes and routing; avoid sharp bends or pinched wiring when installing
• After installation, restore power and run an ice-maker test cycle to verify proper operation

This filler wrapper corner is a small trim piece that restores the finished edge and alignment where two panels meet, helping keep the appliance looking finished and reducing gaps or rubbing between surfaces. What it does

• Covers and finishes the outer corner where filler/trim panels meet for a clean appearance
• Helps maintain panel alignment and keeps adjacent parts from rubbing or catching
• Reduces visible gaps that can collect dirt or moisture
• Commonly replaced when corner trim is cracked, broken, or missing

• One filler wrapper corner

• Disconnect power to the appliance before beginning any repair
• Handle trim pieces gently to avoid cracking; pry or loosen adjacent trim panels as needed
• May require removing outer panels or adjacent trim fasteners for access
• Work slowly and use non-marring tools to avoid damaging surrounding finishes

This 8" crisper pan is the replacement drawer insert that captures moisture and keeps fresh produce organized in the refrigerator. It restores proper storage and helps maintain humidity for fruits and vegetables. What it does:

• Serves as the removable bottom for the crisper drawer, holding produce and loose items
• Collects drips and small spills to protect the refrigerator interior
• Helps preserve produce by maintaining a stable environment in the crisper area
• Replaces cracked, chipped, warped, or missing crisper pans that can catch water or cause items to tilt

• One crisper pan

• Unplug the refrigerator or disconnect power before starting if you will be moving heavy components
• Empty and remove the crisper drawer, then lift out the old pan
• Seat the new pan fully in the drawer frame and ensure smooth drawer operation before returning contents
• Handle carefully to avoid chips or cracks; do not force or pry into place

This replacement drip tray catches and channels water and condensation away from the appliance interior to help reduce leaks and maintain a cleaner cabinet. Made to match the original fit and finish for easy swap-out. What it does:

• Collects meltwater and condensation from the evaporator/defrost area to prevent pooling inside the cabinet
• Directs water to the drain area so it safely evaporates or drains away
• Helps reduce odors and ice buildup by keeping the drain area contained
• Fits into the original tray location and aligns with existing drain passages

• One black drip tray (1 piece)

• Remove power to the appliance before beginning any work to avoid electrical hazards
• Access may require removing shelves, drawers, or an interior panel depending on model
• Align tray with existing slots or tabs and slide into place until it seats fully
• Inspect drain passage for debris and clean before installing the new tray

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.