Wrf560seywoo Parts

Color: Grey / Left Hand

This evaporator cover gasket seals the evaporator housing to help maintain proper airflow and reduce moisture at the evaporator. Replacing a worn gasket helps restore consistent cooling and prevents frost buildup around the evaporator. What it does:

• Seals the evaporator cover to the cabinet to minimize air leaks and moisture intrusion
• Helps maintain proper airflow across the evaporator for efficient cooling
• Reduces frost and ice buildup on or around the evaporator cover
• Can alleviate symptoms such as uneven cooling, excessive frost near the evaporator, or longer compressor run times

• One evaporator cover gasket

• Disconnect power before starting any repair to avoid electrical shock
• Remove the evaporator cover per your model's service instructions to access the gasket
• Inspect mating surfaces and clean away ice or debris before installing the new gasket for a proper seal
• Reassemble components in reverse order, verifying the gasket seats evenly around the cover

This replacement ejector is the plastic arm that pushes harvested ice cubes out of the ice mold and into the storage bin, helping restore proper ice ejection and reduce ice that sticks inside the tray. What it does:

• Pushes ice cubes out of the ice mold during the ice maker's harvest cycle.
• Works with the ice maker's motor/gear assembly to advance cubes into the bin.
• Replaces worn, cracked, or broken ejector arms that can leave ice stuck in the mold.
• Can help address symptoms such as cubes that don't eject, partial fills, or frequent ice jams.

• Disconnect power to the refrigerator before servicing to prevent electrical shock.
• Remove the ice bin and follow the OEM ice maker removal steps to access the ejector.
• Handle plastic components carefully to avoid cracking; inspect gears, mounts, and the ice tray for related wear.

This clip kit secures small panels, wiring harnesses, or trim on compatible Whirlpool appliances to prevent rattling and keep components in their intended position. It restores proper fit and helps reduce noise from loose parts. What it does:

• Holds wiring harnesses and cables in place to prevent chafing or contact with moving parts
• Secures panels, trim, or hoses so assemblies stay aligned and quiet
• Reduces rattling, buzzing, or vibration caused by loose components
• Keeps parts positioned during normal use and transport

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use basic hand tools; avoid forcing clips into place to prevent breakage
• Replace any damaged clips with the exact kit to ensure proper fit
• Re-check that fastened parts are secure and that there are no pinched wires before restoring power

This rubber grommet provides a tidy, protective seal where hoses, wires, or shafts pass through the appliance cabinet—helping prevent chafing, reduce vibration noise, and maintain proper sealing around openings. What it does:

• Cushions and protects wiring or hoses from rubbing against metal edges
• Helps maintain a seal to reduce water or air bypass where fitted
• Dampens vibration and reduces related noise at the penetration point
• Keeps openings finished and helps prevent further component wear

• Disconnect power (and water for washers) before starting any repair
• Inspect the mounting area for sharp edges or damage; replace if surrounding parts are compromised
• Push the grommet into the opening and seat evenly; do not stretch excessively

This air tower directs cold air from the evaporator into the fresh-food and freezer compartments to help keep temperatures even and maintain food freshness. Replacing a cracked or damaged tower restores proper airflow. What it does:

• Channels chilled air from the evaporator to refrigerator and freezer compartments
• Helps reduce hot spots and uneven cooling when functioning correctly
• Prevents airflow leaks that can cause frost buildup or excessive cycling
• Works with existing evaporator and blower fan to distribute air

• One air tower (air duct assembly)

• Disconnect power before servicing to avoid electrical shock
• Remove interior liners or shelves as needed; handle plastic shrouds gently to avoid cracking
• Verify fit and orientation match the original before final fastening

This spring-style tube clamp secures flexible tubing to fittings, helping prevent leaks and maintain proper flow. It's a simple replacement that restores a firm seal on water or drain lines. What it does:

• Keeps flexible tubing firmly clamped to barbed or nipple fittings
• Helps stop or reduce leaks from loose or corroded connections
• Prevents tubing from slipping off under pressure or vibration
• Useful where a compact, spring-action clamp is required

• Disconnect power and shut off water to the appliance before replacing parts
• Use pliers to expand the clamp, position it over the tube/fitting, then release to secure
• Inspect connected tubing and fittings for damage; replace if cracked or severely corroded

This wire harness assembly routes power and signals to the evaporator-area components so the refrigerator can defrost and circulate air reliably. Replaces a worn or damaged harness to restore proper electrical connections and operation. What it does:

• Provides factory routing and terminals for evaporator heater, fan, and sensors
• Restores lost power or signal paths that can cause defrost failure or fan stoppage
• Helps eliminate intermittent operation, frost buildup, or related error codes
• Maintains secure connector fit to prevent arcing or shorts

• Disconnect power at the breaker or unplug the appliance before starting.
• Match connectors and routing to the original harness; secure with existing clips.
• Avoid pinching or stretching wires; inspect connectors for corrosion before installation.
• Test defrost and fan operation after installation to ensure proper function.

This center door hinge assembly keeps the refrigerator doors aligned and able to pivot smoothly for reliable opening and closing. It replaces a worn or damaged center hinge to restore proper door operation and fit. What it does:

• Provides the central pivot point that supports and aligns the refrigerator door
• Restores correct door swing and helps maintain an even door-to-frame seal
• Helps reduce rubbing, sagging, or misalignment that can cause closing issues
• Works with existing hinge pins and mounting hardware to maintain door stability

• Disconnect power to the appliance before beginning work.
• Support the door while removing or installing the hinge to prevent dropping or damage.
• Keep original screws and pins if they remain undamaged; replace any stripped fasteners.

This mounting bracket secures internal components in place to keep your appliance stable and operating quietly. It replaces a worn, bent, or broken bracket to restore proper alignment and prevent loose or rattling parts. What it does:

• Provides a stable mounting point for panels, assemblies, or hardware
• Keeps connected components aligned to prevent rubbing or vibration
• Stops noises caused by loose or shifting internal parts
• Restores proper fit when an old bracket is bent, cracked, or missing

• Install with appliance unplugged or power disconnected to avoid shock
• Verify bracket orientation using the appliance's service diagram before fastening
• Use appropriate screws/fasteners and torque to avoid stripping or distortion

Color: White. Size: 13 oz. Spray paint primer. can.

This dispenser trim is the exterior bezel that finishes the refrigerator dispenser opening, restoring a clean appearance and helping align the dispenser components for smooth operation. What it does:

• Covers and protects the dispenser opening from scratches and wear
• Helps position the dispenser controls and chute for reliable use
• Prevents debris from entering behind the dispenser assembly
• Commonly replaced when the bezel is cracked, chipped, or loose

• One dispenser trim piece as shown

• Disconnect power to the appliance before beginning service
• Remove any clips or screws holding the existing trim and lift the old bezel away carefully
• Align the new trim and secure with the original fasteners; avoid overtightening

The Reservoir is an OEM part for Whirlpool refrigerators. This partis responsible for storing and dispensing water for your refrigerator's water and ice dispenser. It ensures a steady flow of water to the dispenser, allowing you to enjoy refreshing drinks and ice cubes whenever you need them.

A bad water reservoir and filter outlet tube can occur due to damage, leaks, or blockages. If you notice symptoms such as reduced water flow, water leaks, or inconsistent water dispensing, it may be time to replace the water reservoir and filter outlet tube with this genuine OEM part..

Symptoms of a bad part include:

• Reduced water flow from the dispenser
• Water leaks around the dispenser area
• Inconsistent or intermittent water dispensing

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

Color: Stainless

This replacement water tube routes water for the refrigerator dispenser/ice system so your appliance can deliver water where it needs to go. Durable molded tubing replaces damaged or restricted lines to restore reliable water flow. What it does:

• Carries water between the supply, valve, dispenser and/or ice components
• Replaces cracked, kinked or leaking tubing that causes visible leaks
• Helps restore normal dispenser flow when the original line is blocked or pinched
• Fits where molded refrigerator water lines are specified by the manufacturer

• Turn off water supply and unplug the appliance before starting work
• Release any retaining clips or fasteners carefully to avoid damage
• Inspect connection fittings and replace worn clamps or seals as needed
• After installation, restore water and power, then check all connections for leaks

This pantry deli pan assembly replaces the removable pan in the refrigerator pantry/deli drawer so you can store deli meats, cheeses and other small food items neatly and securely. Restores the pantry drawer's storage surface and containment. What it does:

• Provides a shallow removable pan for the pantry/deli drawer to hold and contain deli items and small packages
• Restores a clean, even surface for storing foods that might otherwise leak or scatter
• Helps contain spills and makes routine cleaning easier by removing and rinsing the pan
• Fits into the pantry/deli drawer support system to maintain proper drawer function

• Remove power to the appliance before doing any disassembly of interior parts
• Typically installs by sliding into the pantry/deli drawer track or snapping into the drawer frame—handle gently to avoid damage
• Inspect mounting points and drawer supports for damage before installation; replace any broken supports for proper fit
• Clean part with mild detergent and warm water before first use; avoid abrasive cleaners