Wrs315dhz Parts

This is a flat plain washer used to distribute load and space hardware on appliance assemblies. It helps keep bolts and screws seated and reduces wear on mating surfaces for more secure fastener connections. What it does:

• Provides a flat bearing surface to spread clamp load and protect parts from fastener damage
• Maintains proper spacing and alignment for mounted components
• Helps prevent fastener loosening from vibration when used with the correct bolt or screw
• Commonly used on chassis, suspension, and bracket connections

• One plain flat washer

• Disconnect power and water supply before servicing the appliance
• Replace only with the same washer size and thickness as the original for proper fit
• Tighten fasteners to secure but avoid over-torquing which can deform the washer

The Compressor is an OEM component specifically designed for Whirlpool refrigerators. Located inside the refrigerator cabinet, the compressor circulates refrigerant throughout the cooling system, regulating temperatures inside food compartments. Its efficient operation is crucial to food freshness and refrigerator function.

Symptoms of a bad compressor include: 

• Elevated interior temperatures unable to be maintained  
• Louder than normal buzzing or humming sounds coming from inside
• Frost or ice building up in areas where it typically would not  
• Refrigerator lights repeatedly cycling on and off

Causes of compressor failure involve normal wear of internal parts over time, loss of refrigerant allowing components to overwork, or disruption in the flow and pressure of circulating coolant. 

This OEM Whirlpool part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. 

A small metal clamp that secures flexible hoses or tubing in laundry and kitchen appliances to prevent leaks and keep connections tight. Simple, durable replacement for a worn or loose hose fastening point. What it does

• Holds a hose or tube firmly to a barb, fitting or nipple to stop leaks and movement
• Restores a secure connection where a cracked or corroded clamp allows fluid or air escape
• Common service item for loose drain, fill, or vent hoses showing seepage or slipping
• Helps maintain proper appliance function by ensuring sealed hose connections

• One clamp

• Disconnect power and water before servicing; follow your appliance safety procedures
• Inspect mating hose and fitting for damage; replace hose if cut or brittle
• Use the correct pliers or clamp tool for safe installation and to avoid over-tightening

This inverter box is the motor drive module that controls variable-speed operation of the washer motor, enabling proper agitation and spin cycles for reliable cleaning performance. What it does:

• Converts and regulates power to the washer drive motor for controlled speed and torque
• Works with the main control board to enable precise wash and spin functions
• A failing inverter may cause the washer to not spin, not agitate, display motor-related errors, or run with irregular speeds
• Intended as the direct replacement module for compatible Whirlpool front-load washer drive systems

• One inverter box (motor drive module)

• High-voltage component — disconnect power before accessing or replacing the inverter box
• Follow OEM service manual instructions and secure all connections; inspect wiring and connectors for damage
• Reinstall panels and fasteners to factory specifications; test garment and spin cycles after replacement

This genuine replacement tube connects the refrigerator's water supply to the dispenser and ice maker, restoring reliable water flow and helping stop leaks or drips. Use when the original tube is cracked, kinked, or leaking. What it does:

• Carries water from the household line to the dispenser and ice maker assemblies.
• Replaces damaged, cracked, or kinked tubing that can cause leaks or reduced water flow.
• Helps restore normal dispensing and ice maker fill when the original tube is compromised.
• Designed to fit the original routing and connection points for a clean installation.

• Turn off and disconnect power, then shut off the refrigerator water supply before installing.
• Inspect fittings and seals; replace any damaged clamps or gaskets to ensure a watertight connection.
• Use basic hand tools; avoid sharp bends or kinks in the new tube to maintain flow.
• Check for leaks after restoring water and power; tighten fittings as needed.

This electronic control board manages the appliance's user interface and cycle functions, restoring reliable control of settings, timers, and electronic diagnostics. Replaces a failed main control to recover normal machine operation. What it does:

• Receives input from the control panel and tells the appliance when to start, stop, and run cycles
• Controls timers, relays, and electronic sensors for correct cycle sequencing
• Common symptom: appliance won't start or complete cycles, or cycles act erratically
• Common symptom: display is blank, shows error codes, or buttons are unresponsive

• Disconnect all power (unplug or switch off at the breaker) before starting
• Label wiring and take photos to ensure correct re-connection
• Handle the board by the edges and avoid static discharge; do not touch component leads
• Test operation before reassembling trim panels.

This filler is a trim piece that fills the gap between the appliance and surrounding cabinetry for a finished look and to keep debris out of tight spaces. It restores proper fit and appearance after removal or damage. What it does:

• Covers the gap between the appliance and cabinets to improve appearance
• Prevents small items and debris from getting trapped in the gap
• Restores proper alignment and sealing where trim has been lost or damaged
• Useful when replacing panels or re-installing the appliance

• One filler trim piece as shown

• Designed for simple, non-technical replacement; typically snaps or screws into place
• Turn off and disconnect the appliance power before accessing mounting areas
• Keep fasteners from original installation; replace only with matching hardware if needed

This wire harness routes power and signals between the appliance control and key components, restoring reliable electrical connections for proper operation. It's a direct-fit replacement when wires or connectors are damaged or corroded. What it does:

• Replaces damaged or frayed wiring that can cause intermittent operation or a non-working appliance
• Restores secure connections to control boards, switches, motors or sensors
• Helps resolve symptoms like no power to components, erratic behavior, or burned/melted connector issues
• Provides factory-style connectors and routing to maintain original function

• Disconnect power (unplug or switch off breaker) before starting any repair
• Label or photograph existing connector locations to ensure correct reinstallation
• Route harness following factory clips and openings; avoid sharp edges and pinch points
• Verify secure connections and test appliance function after reassembly

This retainer is a small mounting clip that secures a component to the appliance housing or shaft, keeping parts aligned and preventing excess movement for reliable operation. It's a simple replacement that restores proper fit and function. What it does:

• Secures a component in place to prevent slipping, rotation, or misalignment
• Maintains correct spacing between moving parts to reduce wear and noise
• Helps stop rattling or loose parts caused by a broken or missing clip
• Works as a straightforward mechanical fastener—no wiring or sensors involved

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Access may require removing a panel or adjacent parts—keep fasteners organized.
• Inspect surrounding parts (shafts, bearings, brackets) for wear before reassembly.
• Use basic hand tools; replace if the clip is cracked, bent, or worn.

This fan scroll gasket seals the evaporator/fan housing to prevent air bypass and maintain proper airflow through the evaporator. Replacing a worn gasket helps restore efficient cooling and reduces frost buildup. What it does:

• Seals the fan scroll/evaporator housing to direct cold air through the evaporator fins
• Prevents air leaks that can cause reduced cooling or temperature fluctuations
• Helps reduce frost or ice buildup by ensuring consistent airflow over the coil
• Can reduce abnormal fan noise caused by air turbulence around a damaged seal

• Disconnect power to the appliance before beginning any work.
• Remove the evaporator/fan housing cover and carefully pull out the old gasket.
• Clean mating surfaces of debris and residue for a flush seal before installing the new gasket.
• Seat the gasket fully around the scroll; reassemble panels and restore power to test operation.

This replacement clip secures the defrost heater to the evaporator so the heater stays in proper contact and defrosts frost buildup efficiently. Durable, OEM-style retention clip designed for refrigerators. What it does

• Secures the defrost heater to the evaporator assembly to ensure consistent defrost cycles
• Prevents the heater from shifting or coming loose, which can cause frost buildup or interrupted defrosting
• Helps maintain proper contact for efficient heat transfer during defrost
• Small, inexpensive part that can prevent larger ice/frost-related issues

• Disconnect power to the appliance before accessing the evaporator compartment.
• Handle the evaporator fins and heater element carefully to avoid damage.
• Typically installs with basic hand tools; replace any damaged or corroded clips.

This air duct clip secures an appliance's air duct or vent to the housing, keeping airflow channels properly aligned and reducing air leaks. A simple replacement that restores correct duct positioning and minimizes airflow issues. What it does:

• Holds the air duct or vent in place to maintain proper airflow alignment
• Prevents the duct from slipping or separating from the housing
• Helps reduce air leaks that can affect performance or cause noise
• Fits where a small plastic/metal retainer is required to secure ducting

• One air duct clip/retainer

• Disconnect power before servicing the appliance to avoid shock or injury
• Use basic hand tools to remove the old clip and snap or screw the new clip into place
• Handle carefully to avoid breaking plastic tabs; the clip fully engages the duct and housing
• If the clip doesn't fit securely, re-check the duct orientation and mounting position

Size: 3/16 inch.

Size: 5/16 inch.