Wrs315sdhz Parts

This genuine replacement tube connects the refrigerator's water supply to the dispenser and ice maker, restoring reliable water flow and helping stop leaks or drips. Use when the original tube is cracked, kinked, or leaking. What it does:

• Carries water from the household line to the dispenser and ice maker assemblies.
• Replaces damaged, cracked, or kinked tubing that can cause leaks or reduced water flow.
• Helps restore normal dispensing and ice maker fill when the original tube is compromised.
• Designed to fit the original routing and connection points for a clean installation.

• Turn off and disconnect power, then shut off the refrigerator water supply before installing.
• Inspect fittings and seals; replace any damaged clamps or gaskets to ensure a watertight connection.
• Use basic hand tools; avoid sharp bends or kinks in the new tube to maintain flow.
• Check for leaks after restoring water and power; tighten fittings as needed.

This electronic control board manages the appliance's user interface and cycle functions, restoring reliable control of settings, timers, and electronic diagnostics. Replaces a failed main control to recover normal machine operation. What it does:

• Receives input from the control panel and tells the appliance when to start, stop, and run cycles
• Controls timers, relays, and electronic sensors for correct cycle sequencing
• Common symptom: appliance won't start or complete cycles, or cycles act erratically
• Common symptom: display is blank, shows error codes, or buttons are unresponsive

• Disconnect all power (unplug or switch off at the breaker) before starting
• Label wiring and take photos to ensure correct re-connection
• Handle the board by the edges and avoid static discharge; do not touch component leads
• Test operation before reassembling trim panels.

This wire harness routes power and signals between the appliance control and key components, restoring reliable electrical connections for proper operation. It's a direct-fit replacement when wires or connectors are damaged or corroded. What it does:

• Replaces damaged or frayed wiring that can cause intermittent operation or a non-working appliance
• Restores secure connections to control boards, switches, motors or sensors
• Helps resolve symptoms like no power to components, erratic behavior, or burned/melted connector issues
• Provides factory-style connectors and routing to maintain original function

• Disconnect power (unplug or switch off breaker) before starting any repair
• Label or photograph existing connector locations to ensure correct reinstallation
• Route harness following factory clips and openings; avoid sharp edges and pinch points
• Verify secure connections and test appliance function after reassembly

This retainer is a small mounting clip that secures a component to the appliance housing or shaft, keeping parts aligned and preventing excess movement for reliable operation. It's a simple replacement that restores proper fit and function. What it does:

• Secures a component in place to prevent slipping, rotation, or misalignment
• Maintains correct spacing between moving parts to reduce wear and noise
• Helps stop rattling or loose parts caused by a broken or missing clip
• Works as a straightforward mechanical fastener—no wiring or sensors involved

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Access may require removing a panel or adjacent parts—keep fasteners organized.
• Inspect surrounding parts (shafts, bearings, brackets) for wear before reassembly.
• Use basic hand tools; replace if the clip is cracked, bent, or worn.

This fan scroll gasket seals the evaporator/fan housing to prevent air bypass and maintain proper airflow through the evaporator. Replacing a worn gasket helps restore efficient cooling and reduces frost buildup. What it does:

• Seals the fan scroll/evaporator housing to direct cold air through the evaporator fins
• Prevents air leaks that can cause reduced cooling or temperature fluctuations
• Helps reduce frost or ice buildup by ensuring consistent airflow over the coil
• Can reduce abnormal fan noise caused by air turbulence around a damaged seal

• Disconnect power to the appliance before beginning any work.
• Remove the evaporator/fan housing cover and carefully pull out the old gasket.
• Clean mating surfaces of debris and residue for a flush seal before installing the new gasket.
• Seat the gasket fully around the scroll; reassemble panels and restore power to test operation.

This air duct clip secures an appliance's air duct or vent to the housing, keeping airflow channels properly aligned and reducing air leaks. A simple replacement that restores correct duct positioning and minimizes airflow issues. What it does:

• Holds the air duct or vent in place to maintain proper airflow alignment
• Prevents the duct from slipping or separating from the housing
• Helps reduce air leaks that can affect performance or cause noise
• Fits where a small plastic/metal retainer is required to secure ducting

• One air duct clip/retainer

• Disconnect power before servicing the appliance to avoid shock or injury
• Use basic hand tools to remove the old clip and snap or screw the new clip into place
• Handle carefully to avoid breaking plastic tabs; the clip fully engages the duct and housing
• If the clip doesn't fit securely, re-check the duct orientation and mounting position

This connector is an electrical harness connection used to join wiring in compatible appliances, restoring a secure circuit and helping components receive reliable power. Replaces a broken or damaged plug-style connector to improve electrical contact and reduce intermittent operation. What it does:

• Provides a secure electrical connection between wiring harnesses or components
• Restores reliable power flow to the connected component when the original connector is damaged
• Helps eliminate intermittent faults caused by loose, corroded, or broken terminals
• Used where a plug-style harness connection is required for a serviceable splice or component plug

• Disconnect power to the appliance before servicing to avoid electric shock
• Verify connector orientation and fit against the appliance harness before final installation
• Inspect mating terminals for damage or corrosion and replace if necessary

This fan scroll is the molded airflow housing that channels cooling air through the appliance to help the cooling system run efficiently. Replace a damaged or cracked scroll to restore proper airflow and reduce excessive noise. What it does

• Directs airflow from the condenser/evaporator area to improve heat exchange and cooling performance
• Helps stabilize airflow so the fan blade runs quietly and efficiently
• Can reduce overheating or frost issues caused by disrupted airflow
• Commonly replaced when cracked, melted, or broken mounting tabs cause vibration or air leaks

• One fan scroll

• Disconnect power to the appliance before beginning any repair
• Typically accessed from the rear or inside panels; some panels or components may need removal
• Inspect the fan blade and motor while replacing the scroll; damaged blades or loose mounts can cause repeat issues
• Use care when aligning mounting tabs and fasteners to avoid cracks; hand-tighten screws before final torque

The Reservoir is an OEM part for Whirlpool brand bottom-mount refrigerators. Located internally, it collects excess condensation and runoff from refrigerator components.

Causes of a bad reservoir can include cracks forming over time from the impact of falling debris or damage, as well as mineral scale deposits constricting drain openings.

Symptoms of a bad reservoir include:

• Standing water or flooding in the bottom of the refrigerator  
• Leaks or drips appearing around refrigerator connections
• Poor drainage and disposal of condensate waters  
• Musty odors developing from excess moist environments 

Compatible also with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore refrigeration systems.

This replacement ice door is the inner dispenser door that covers the ice chute, helping keep ice contained and reducing warm air entry into the freezer. Fits models that use part W11678841. What it does:

• Covers the ice chute so crushed or cubed ice dispenses cleanly and stays inside the dispenser area
• Helps limit warm air and moisture from entering the freezer when the dispenser is not in use
• Prevents visible ice and debris from falling into the dispenser opening
• Resolves symptoms like a cracked or broken dispenser flap, ice falling out, or a door that won't close fully

• One ice door (inner dispenser door)

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing the freezer door inner panel or dispenser bezel; keep screws and fasteners organized
• Handle plastic components carefully to avoid breaking tabs; test door movement before reassembling panels

This mounting bracket secures the ice dispenser motor and keeps the dispenser drive aligned for reliable ice delivery. Replaces a worn or broken bracket to restore proper motor positioning and dispenser function. What it does:

• Holds the ice dispenser motor firmly in place to ensure correct gear engagement and smooth dispenser operation
• Helps prevent motor misalignment that can cause the dispenser to jam, skip, or make noise
• Supports proper movement of the dispenser actuator and auger drive assembly
• Commonly replaced when the motor or dispenser housing shows looseness or physical damage

• One ice dispenser motor mounting bracket

• Disconnect power to the appliance before starting any work
• Basic hand tools required; access may require removing the dispenser housing or inner door panel
• Handle plastic parts carefully to avoid cracking; inspect surrounding fasteners and components while reinstalling

This replacement clip secures the defrost heater to the evaporator so the heater stays in proper contact and defrosts frost buildup efficiently. Durable, OEM-style retention clip designed for refrigerators. What it does

• Secures the defrost heater to the evaporator assembly to ensure consistent defrost cycles
• Prevents the heater from shifting or coming loose, which can cause frost buildup or interrupted defrosting
• Helps maintain proper contact for efficient heat transfer during defrost
• Small, inexpensive part that can prevent larger ice/frost-related issues

• Disconnect power to the appliance before accessing the evaporator compartment.
• Handle the evaporator fins and heater element carefully to avoid damage.
• Typically installs with basic hand tools; replace any damaged or corroded clips.

This evaporator assembly circulates refrigerant and removes heat inside the freezer section to enable proper cooling and frost control. Replaces a damaged or corroded evaporator to restore normal temperature performance. What it does:

• Holds refrigerant and transfers heat so the freezer evaporates moisture and cools the compartment.
• Commonly used when frost builds up, freezer runs warm, or cooling is intermittent.
• Works with the sealed refrigeration system and defrost components to maintain proper cold temperatures.
• Designed to match OEM fit and function for compatible refrigerators.

• System evacuation, recharge, and leak testing are required after installation.
• Disconnect power before servicing to avoid electrical shock and appliance damage.
• Inspect related defrost and sealing components during replacement.