Wrs9ociohoo Parts

The Handle Set Screw is an OEM part for Whirlpool refrigerators. As an internal component, the set screw is used to securely hold refrigerator door handles in place for easy opening and closing of access doors. 

Symptoms of a bad handle set screw include: 

• Handles that spin loose and no longer open doors properly
• Loss of attachment causing handles to fall off doors    
• Potential for handles to fall on feet presenting a safety hazard
• Opening issues, like hands slipping off spinning handles 

Causes involve wear from repeated use or accidental tightening damage stripping threads and allowing handle loosening, affecting usability.

This OEM Whirlpool part is also compatible with some Kenmore and KitchenAid models.

The Cam Door Fridge is an OEM component specifically designed for Whirlpool refrigerators.  It works to operate and support the refrigerator door, controlling its opening and closing movements.  The cam door uses a precisely engineered cam mechanism to provide a smooth and balanced door function.  

Causes of a bad cam door can include worn out or damaged parts from repeated opening and closing of the door. The cam mechanism may no longer operate properly if components are broken or out of alignment.

Symptoms of a bad cam door include:

• Difficulty opening or closing the refrigerator door  
• The door not staying securely closed or properly sealed
• Excessive noise or vibration coming from the door area
• Door alignment issues causing gaps around the door seal

Color: Black

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This water outlet tube routes water within the appliance's water system, maintaining a secure, leak-resistant path to its outlet. Replace a cracked, kinked, or leaking tube to restore proper water flow and prevent leaks. What it does:

• Directs water from internal plumbing to the designated outlet/assembly
• Maintains a sealed connection to help prevent drips and leaks
• Typical failure symptoms: water leaking inside or onto the floor; weak or no water flow; visible cracks, kinks, or a loose fit at connections

• 1 water outlet tube

• Disconnect power and shut off the water supply before servicing
• Note tube routing and connection points; remove any clips/fasteners as needed and pull the old tube free
• Fully seat the new tube into each port; ensure any existing seals or clips are positioned correctly
• Run a short test cycle and check all joints for leaks

This dispenser light replaces the small lamp that illuminates the refrigerator's ice/water dispenser alcove. It restores clear visibility of the dispenser area in low light so you can see fill levels and selections while dispensing.

• Provides illumination for the dispenser alcove when the control turns the light on
• Common symptoms: no dispenser light, dim or flickering light, or intermittent illumination
• Helps with accurate filling and improves visibility when dispensing ice or water

• Unplug the refrigerator or disconnect power before servicing
• Access the dispenser housing; remove any trim or lens as needed to reach the light
• Release locking tabs or screws and unplug the wire connector from the old light
• Connect and seat the new light, reassemble, restore power, and test operation

The Bin Assembly Door, RC, Shallow is an OEM part for Whirlpool refrigerators. It is designed to fit on the refrigerator door and provides additional storage space for smaller items like condiments, jars, and cans. This bin assembly helps in organizing the refrigerator contents efficiently and makes them easily accessible.

Common causes of a bad bin assembly can include cracks or breaks from repeated use, damage from overloading, or wear and tear over time.

Symptoms of a bad bin assembly include:

• Cracks or visible damage on the bin
• Difficulty in fitting the bin securely on the door
• Items falling out or not staying in place
• Reduced storage capacity due to a broken bin

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door shelf bin mounts to your refrigerator door to hold condiments, beverages, and small items. Replace a cracked or missing bin to restore organized storage and keep items secure when opening and closing the door.

• Provides additional door storage and organizes frequently used items
• Attaches to molded slots on the door liner; snaps in and out for cleaning
• Helps prevent containers from tipping or falling when the door moves
• Common failure symptoms: cracked plastic, broken tabs, bin won't stay seated, or missing bin

• Power off the refrigerator and remove items from the old bin
• Lift the old bin straight up and out; align the new bin's tabs with the door slots
• Press down firmly until it clicks and sits level; avoid over-flexing the plastic
• Confirm the bin is fully seated before loading items

This door hinge restores smooth, controlled door movement and a secure close. Replacing a worn hinge helps the door align properly and engage the gasket or latch for reliable everyday operation.

• Supports and pivots the door on its side
• Provides tension for controlled opening and closing
• Helps keep the door fully closed and properly aligned with the cabinet
• Common signs of wear: door won't close completely, drops open too quickly, feels loose or misaligned, or creaks

• Disconnect power (and gas, if applicable) before servicing; allow the appliance to cool
• Remove or support the door before detaching the hinge; note orientation and side
• Use caution—the hinge is spring-loaded; release and re-engage tension slowly
• After installation, check door alignment, closing action, and seal/latch engagement

This is a high-quality refrigerator power supply board. It's an internal component that is made to control the refrigerator functions. This part is made with small precision parts to help with timing defrost and cooling cycles. This part can be damaged or malfunction and stop operating correctly. This may prevent the refrigerator from running, cause strange sounds, or cause the refrigerator to run at the wrong temperature.If this part is damaged, it will need to be replaced. Before replacing the power supply board, make sure the refrigerator is unplugged from the wall. The process will require a flathead screwdriver and a nut driver. Use the tools to unthread the screws on the access cover. Depress the retaining tab to remove the inner cover and disconnect the wires. Press the tab to release the power supply board and snap in the new component. Make sure the wires are properly connected and reassemble.This genuine OEM replacement part is sold on an individual basis. It is directly acquired from the manufacturer and is designed to be compatible with refrigerators made by Kenmore, Whirlpool, Maytag, and KitchenAid.

This water supply tube connects at the inlet water valve, routing water through your appliance's water system. Replacing a brittle, cracked, or kinked line helps restore reliable, leak-free operation and proper water flow. What it does:

• Carries water from the inlet valve to the designated component (such as dispenser, icemaker, or filter housing, depending on model)
• Helps maintain proper water pressure and uninterrupted flow
• Common symptoms include leaks at the back/bottom, slow or no water at the dispenser, or an icemaker not filling
• Addresses visible cracks, brittleness, or kinks in the existing tubing

• 1 water supply tube

• Disconnect power and shut off the household water supply; relieve line pressure by dispensing water
• Place a towel to catch residual water and note the original routing before removal
• For push-in/quick-connect fittings, insert fully and tug back to verify engagement; if using compression fittings, tighten snugly without overtightening
• Turn water on and check all connections for leaks before restoring power

The Snack Pan is an OEM part for Whirlpool refrigerators. It provides storage space for snacks, fruits, and other small food items in your refrigerator. It offers a designated space to organize and keep your favorite snacks readily accessible, ensuring they stay fresh and easily visible.

A bad snack pan can occur due to accidental damage, wear and tear, or improper handling. If you notice symptoms such as cracks, broken pieces, or difficulty in sliding the pan in and out of the refrigerator, it may be time to replace it.

Symptoms of a bad snack pan include:

• Cracks or broken pieces
• Difficulty in sliding the pan in and out of the refrigerator
• Inability to keep snacks organized and accessible

Restore your refrigerator's storage capacity and keep your snacks fresh by replacing the damaged or worn-out snack pan with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Hinge-Door is an OEM part for Whirlpool refrigerators. The refrigerator door hinge is a crucial component that allows the door to properly open and close while securely holding it in place. These hinges are responsible for smooth and reliable door operation through thousands of openings and closings. 

Causes of a bad hinge can include wear and tear from prolonged use, stress from overloading the door, or accidental impact damage. 

Symptoms of a bad hinge include:

• The door not closing properly or staying fully shut  
• Difficulty or resistance when opening/closing the door
• The door sagging or wobbling excessively
• Noise or grinding sounds coming from the hinge area

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fan Motor is an OEM part for Whirlpool refrigerators. Located inside the fresh food or freezer compartments, it circulates cold air evenly throughout interior shelves and bins.  

Symptoms of a bad fan motor include:

• Erratic temperature fluctuations within sections
• Frost or ice buildup in areas further from vents
• Muffled or grinding noises emanating from inside walls

Causes can be normal wear over many years of operation, failure of electronic speed controls, or accumulated debris inhibiting smooth fan rotation.

This Whirlpool OEM replacement will restore the air circulation needed to maintain consistent temperatures. It is also compatible with Maytag, Jenn-Air, Amana, KitchenAid, and some GE side-by-side models for a seamless repair that prolongs your refrigerator's performance. 

This dispenser drip tray grille sits on the refrigerator's ice/water dispenser tray. It provides a stable rest for cups and lets drips pass into the tray below, keeping the dispenser area neat with a finished, stainless look.

• Supports glasses and mugs while dispensing ice or water
• Slotted design allows moisture to drain into the tray beneath
• Replaces a cracked, warped, stained, or missing grille
• Restores a clean, factory appearance around the dispenser

• Lock the dispenser or disconnect power before servicing near controls
• Lift out the old grille from the drip tray and clean any debris or mineral buildup
• Place the new grille into the tray; ensure it sits flat and drain openings remain clear
• Avoid abrasive cleaners that can damage the finish

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

The air diffuser regulates and directs cold air between the freezer and fresh food sections to maintain even, stable cooling. Replacing a stuck or noisy diffuser restores proper airflow and temperature control throughout the refrigerator.

• Opens and closes a damper to meter cold air from the freezer into the refrigerator compartment
• Helps prevent warm spots, overcooling, and inconsistent temperatures
• Can resolve little/no airflow from the vent, food freezing near the vent, or a warm fresh food section
• Noises such as clicking or grinding from the vent area can indicate a failing diffuser
• Frost or condensation around the air passage may point to a damaged diffuser or seal

• Disconnect power before servicing; wear cut-resistant gloves
• Remove shelves/bins as needed; take off the vent cover to access the diffuser
• Disconnect the wire harness and remove mounting fasteners; transfer any gasket/seal or hardware from the original part
• After installation, restore power and allow temperatures to stabilize

This replacement bracket secures and supports a component in your appliance. Replace a bent, cracked, or missing bracket to restore proper alignment and stable mounting, helping reduce vibration, rattling, and premature wear on connected parts. What it does:

• Holds the related component firmly in place
• Helps maintain correct alignment of the assembly
• Reduces unwanted movement, vibration, and noise
• Common signs it may be needed: loose or shifting component, rattling sounds, visible damage, or a missing bracket

• 1 bracket

• Disconnect power and shut off water or gas supply before servicing
• Wear cut-resistant gloves; brackets and surrounding panels may have sharp edges
• Note the original orientation and reuse existing fasteners as applicable
• After installation, verify alignment and secure fit per your model's parts diagram