Wrt111sfaw 00 Parts

Color: White

This heater provides controlled warmth to prevent ice buildup and keep your refrigerator operating efficiently. It activates as designed by the control system to clear frost or protect targeted areas so airflow and water flow remain unobstructed. What it does:

• Melts frost from key areas to restore proper airflow and cooling performance
• Helps prevent freeze-ups in components such as evaporators or water lines, depending on model
• Supports consistent temperatures and reliable ice/water dispensing
• Common symptoms of a failed heater: heavy frost on the back panel, reduced cooling or warm fresh-food section, frozen dispenser line, longer run times

• 1 heater

• Disconnect power to the appliance before servicing
• Access the heater's location per your model (often behind an interior rear panel near the evaporator or along a fill/water tube)
• Remove built-up ice, transfer any original clips/brackets, and route wiring exactly as factory
• Avoid damaging coil fins or insulation; restore power and allow a complete cycle to verify normal operation

Color: Universal Silver

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This mechanical defrost timer advances the refrigerator's defrost cycle so the evaporator periodically melts accumulated frost. It helps restore normal cooling cycles and prevents excessive frost buildup for more reliable refrigerator performance. What it does:

• Advances the appliance between cooling and defrost modes on a timed schedule
• Stops the compressor during defrost so accumulated ice on the evaporator can melt
• Commonly replaced when heavy frost builds on the evaporator or the fridge/freezer cycles abnormally
• Can address symptoms such as excessive frost, reduced cooling, or continuous compressor operation

• Disconnect power to the appliance before starting any repair
• Access the timer through the back or control area per your model's service instructions
• Note wire locations or take a photo before disconnecting to ensure correct reassembly

Deflector directs airflow inside the appliance to restore consistent temperature distribution and reduce hotspots or frost buildup. Replacing a cracked or missing deflector helps maintain even cooling and reliable performance. What it does:

• Guides internal airflow so cold or warm air reaches the intended compartments.
• Helps prevent uneven temperatures and localized frost or thawing.
• Restores proper circulation when a broken or dislodged deflector disrupts airflow.
• Simple, passive part — when damaged it often causes uneven cooling or increased frost.

• Disconnect power (unplug appliance or switch off breaker) before beginning service.
• Remove shelves, panels, or trim as needed for access; keep fasteners organized.
• Install in the correct orientation; secure without forcing parts or over-tightening.

This hole plug covers an unused opening in the appliance cabinet. It restores a clean, finished look and helps keep spills, dust, and moisture out of internal components.

• Seals an unused hole in the cabinet for a tidy, finished appearance
• Helps protect internal parts from liquids, dust, and humidity
• Covers sharp or unfinished edges around open holes
• Common signs it's needed: missing/broken cap, exposed hole, or a plug that won't stay seated

• Disconnect power and, if applicable, shut off gas/water before starting.
• Remove the old plug; access from the front or from behind the panel as needed.
• Align and press the new plug firmly into the opening until fully seated and flush.
• If panel removal is required for access, handle sheet metal carefully and reinstall all fasteners.

This small metallic flat washer provides a secure bearing surface between fasteners and appliance components to help distribute load and resist loosening. Ideal when replacing worn or missing washers on laundry appliance assemblies. What it does:

• Distributes clamping force from a bolt or nut to prevent damage to softer components
• Helps keep fasteners tight and reduces the chance of loosening from vibration
• Restores proper spacing where a washer has corroded or been lost
• Commonly replaced when you see loose panels, rattles, or misaligned parts near fastener locations

• Verify washer size and thickness match the original before installation
• Use appropriate fastener and torque specifications for your model
• Replace any corroded or damaged fasteners at the same time for best results
• Disconnect power and follow basic safety procedures when working on the appliance

This aerosol spray paint restores the graphite finish on appliance surfaces for quick, low-effort cosmetic touch-ups. Use it to cover small chips, scratches and scuffs so the exterior looks uniform again. What it does:

• Matches graphite appliance finishes for spot repairs and touch-ups
• Covers visible chips, scratches and minor surface scuffs
• Restores a uniform appearance on painted metal appliance surfaces
• Helps protect exposed metal from surface corrosion after repair

• Clean and dry the surface; remove grease, dirt and loose paint before spraying
• Shake can well and test spray on a scrap piece or inconspicuous area first
• Apply in light, even coats from a recommended distance; allow coats to dry between passes
• Use in a well-ventilated area, keep away from heat/open flames, and follow all safety and disposal instructions on the can

This clip kit secures small panels, wiring harnesses, or trim on compatible Whirlpool appliances to prevent rattling and keep components in their intended position. It restores proper fit and helps reduce noise from loose parts. What it does:

• Holds wiring harnesses and cables in place to prevent chafing or contact with moving parts
• Secures panels, trim, or hoses so assemblies stay aligned and quiet
• Reduces rattling, buzzing, or vibration caused by loose components
• Keeps parts positioned during normal use and transport

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use basic hand tools; avoid forcing clips into place to prevent breakage
• Replace any damaged clips with the exact kit to ensure proper fit
• Re-check that fastened parts are secure and that there are no pinched wires before restoring power

Color: White. Size: 13 oz. Spray paint primer. can.

Color: Black

Color: Grey

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

Sealer for refrigerant line insulation.