Wrt138fzdw Parts

The Door Gasket is an OEM replacement part for Whirlpool refrigerators. It is designed to create a tight seal between the fresh food door and the refrigerator cabinet, preventing cold air from escaping and maintaining a reliable barrier against cold air leaks.

A bad fresh food door gasket can occur due to wear and tear, cracks, or damage to its structure. If you notice symptoms such as condensation or frost buildup inside the refrigerator, difficulty in maintaining temperature, or the door not closing properly, it may be time to replace the door gasket.

Symptoms of a bad fresh food door gasket include:

• Condensation or frost buildup inside the refrigerator
• Difficulty in maintaining temperature
• Door not closing properly

Restore your refrigerator by replacing the faulty or damaged fresh food door gasket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement door assembly restores safe access and protection for your appliance. It replaces a cracked, damaged or non-closing door so the appliance can close properly and look like new again. What it does

• Replaces a damaged or cracked door to restore proper closing and safe access.
• Helps prevent leaks, debris entry, and loss of conditioned air or heat depending on the appliance.
• Restores latch engagement and door alignment for reliable operation.
• Improves cosmetic appearance by replacing scratched, dented, or faded doors.

• Disconnect power and, for appliances that use water, turn off water supply before starting.
• Handle glass and sharp edges carefully; wear gloves and eye protection.
• Installation typically requires removing hinge screws and aligning the door; retain all fasteners and follow model-specific instructions.

This rear unit compartment cover protects internal components and provides a finished steel shroud for the appliance, helping prevent debris contact and reducing exposure to wiring and electronics. Durable steel construction for reliable protection. What it does:

• Covers and shields rear compartment components from dust, debris, and accidental contact
• Helps maintain proper airflow routing and component separation inside the unit
• Reduces noise from internal parts and gives a finished appearance to the rear compartment
• Can prevent shorting or damage caused by foreign objects reaching wiring or electronics

• Disconnect power to the appliance before beginning any work
• Use appropriate hand tools to remove and reinstall mounting screws; retain any original hardware if reusable
• Align tabs and mounting holes carefully to avoid bending the cover or stressing adjacent components
• Wear gloves to protect hands from sharp edges

Color: Grey

This mounting bracket secures internal components to the appliance chassis, restoring stable support and alignment. It replaces a worn, bent, or damaged bracket to reduce rattling and prevent parts from shifting during operation. What it does:

• Provides a secure mounting point for internal assemblies to the appliance frame
• Restores proper alignment when a loose or bent bracket causes vibration or noise
• Prevents components from shifting, which can lead to wear or intermittent operation
• Helps eliminate rattling, clunking, or movement-related symptoms during use

• One mounting bracket

• Disconnect power and water before beginning any repair
• Use original screws or fasteners; replace any stripped or damaged hardware

This evaporator cover is the plastic shroud that protects the refrigerator evaporator coil and helps direct cold airflow through the freezer compartment for more consistent cooling. It replaces a cracked, warped, or damaged cover to restore proper airflow and reduce frost buildup. What it does:

• Shields the evaporator coil from ice, debris, and accidental contact
• Channels cold air evenly from the evaporator into the freezer and fresh-food sections
• Helps reduce uneven cooling, excess frost, and airflow noise caused by a damaged cover
• Works with the evaporator fan and defrost components to maintain normal operation

• One evaporator cover / airflow shroud

• Disconnect power before beginning work to avoid electrical shock or compressor startup
• Remove interior panels, shelves, and the evaporator fan as needed for access
• Handle carefully—plastic edges and nearby metal parts may be sharp
• Follow OEM service instructions for proper fit and to verify any related parts

The Wire Harness is an OEM part for Whirlpool refrigerators. It is responsible for providing electrical connections between various parts of the refrigerator, ensuring proper voltage and communication.

A bad wire harness can be caused by wear and tear, exposure to temperature fluctuations, or accidental damage. If you experience issues such as intermittent power loss, malfunctioning components, or error codes on your refrigerator, it may indicate a problem with the wire harness.

Symptoms of a bad wire harness include:

• Intermittent power loss or flickering
• Malfunctioning display or control panel
• Inconsistent cooling or temperature fluctuations

Replace your faulty wire harness with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This field-service door panel kit replaces a damaged or worn 18" stainless exterior door panel to restore appearance and protect the door surface. Use for visible dents, deep scratches, chipped finish, or surface corrosion. What it does:

• Replaces the outer 18" door panel to restore factory appearance.
• Provides a stainless finished exterior for a uniform look.
• Repairs cosmetic damage such as dents, scratches, or chipped paint.
• Helps prevent further surface corrosion when properly installed.

• Disconnect power and empty the appliance door area before starting.
• Installation may require door trim removal, hardware transfer, and basic hand tools.
• Follow the appliance service manual for alignment and torque specifications.

A replacement start device that completes the user-start command to begin the appliance cycle. Restores a responsive start control so the machine will accept user input to begin operation. What it does:

• Completes the electrical signal from the start button to the control so the appliance can begin its cycle
• Replaces a worn or failed start actuator or switch assembly
• Common symptom: appliance does not start when the start button is pressed
• Common symptom: start button is unresponsive or requires repeated presses

• Disconnect power to the appliance before attempting any repair.
• Replace through the control panel or console access; keep track of fasteners and wire connections.
• Reconnect wiring to the matching terminals and verify secure connections.

This humidity control graphic is the replacement label for the crisper drawer humidity slider, restoring clear markings so you can set and read the vent position easily. It helps make humidity settings visible and intuitive. What it does:

• Replaces worn, faded or missing humidity-slider markings on the crisper vent
• Restores clear low/med/high or open/closed indicators for accurate vent position reading
• Helps prevent confusion when adjusting drawer humidity for produce storage
• Matches OEM appearance and placement to maintain original look

• One humidity control graphic/label for the crisper humidity slider

• Disconnect power to the appliance before accessing interior components when required
• Remove the crisper drawer and clean the mounting area; peel-and-stick or snap-in fit may be adhesive-backed
• Align the graphic carefully before attaching to avoid rework; press firmly to ensure full adhesion

This heat shield protects nearby components from high oven temperatures, helping prevent heat damage and maintain safe operation. It's a direct-fit replacement designed to restore proper thermal protection. What it does

• Deflects and shields adjacent parts from radiant heat generated by the oven cavity.
• Helps prevent discoloration, warping, or premature failure of nearby panels and wiring.
• Can stop heat-related smells or scorching around the oven interior or cabinet.
• Restores intended oven airflow and thermal clearance when the original shield is damaged or missing.

• One replacement heat shield

• Disconnect electrical power (and shut off gas for gas ranges) before starting any repair.
• Handle carefully — edges may be sharp; wear gloves and eye protection.
• Verify correct mounting orientation and fasteners; reuse original screws if in good condition or replace with OEM-specified hardware.

This wire shelf replaces a damaged or missing refrigerator shelf to restore storage space and proper air circulation. It provides a sturdy, open-grid surface for storing food and containers while allowing cold air to flow through the compartment. What it does:

• Replaces bent, broken, or sagging wire shelving to restore usable shelf space
• Supports food containers, bottles, and produce while permitting airflow for even cooling
• Prevents items from falling into lower compartments by providing a stable surface
• Helps restore proper organization and prevents contact between items on different levels

• One wire shelf

• Remove food and items from the fridge before installing the shelf
• Slide shelf into existing side or rear support brackets; ensure it seats securely on both sides
• Inspect shelf supports/rails for damage—do not force the shelf if supports are broken

Color: Stainless

A replacement glass shelf that restores stable storage and visibility inside your refrigerator. Tempered glass provides a flat, easy-to-clean surface for organizing food and preventing spills from reaching lower compartments. What it does:

• Provides a sturdy, level surface for storing food and containers
• Helps contain spills and makes cleanup faster and easier
• Restores proper shelf spacing and organization after a broken or missing shelf
• Improves visibility of items by offering a clear, flat storage plane

• Remove all items from the refrigerator and power off the appliance before installing
• Handle glass with care; use gloves to avoid cuts and prevent fingerprints
• Slide or set the shelf into the existing shelf supports or trim until fully seated
• Replace damaged shelf supports or trim before installing the glass