Wrtiiisfaf Parts

This start device initiates the appliance's drive system so cycles begin when you press start. It replaces a failed or intermittent start control to restore reliable cycle starts and responsive push-button operation. What it does:

• Sends the start signal to the drive/motor control so the washer/dryer begins its cycle
• Replaces a worn or failed start switch that can prevent the appliance from starting
• Helps resolve symptoms like no response when pressing Start, intermittent starts, or needing to jiggle the button
• Works as the user-interface start control in combo control assemblies

• Disconnect power before accessing controls to avoid shock or damage
• Handle control components gently; avoid touching circuit traces or contacts
• Verify proper orientation and connector seating during reassembly
• Test operation after installation; inspect associated control components

This mounting bracket secures internal components in place to keep your appliance stable and operating quietly. It replaces a worn, bent, or broken bracket to restore proper alignment and prevent loose or rattling parts. What it does:

• Provides a stable mounting point for panels, assemblies, or hardware
• Keeps connected components aligned to prevent rubbing or vibration
• Stops noises caused by loose or shifting internal parts
• Restores proper fit when an old bracket is bent, cracked, or missing

• Install with appliance unplugged or power disconnected to avoid shock
• Verify bracket orientation using the appliance's service diagram before fastening
• Use appropriate screws/fasteners and torque to avoid stripping or distortion

This small black door stop shim helps position and stabilize the appliance door for correct alignment and smoother closing. It replaces a worn or missing shim to reduce door gaps and rubbing against the cabinet or frame. What it does:

• Centers and supports the door stop so the door closes evenly and seals properly.
• Prevents door-to-cabinet rubbing, scraping, or uneven wear on hinges and seals.
• Helps eliminate minor misalignment that can cause noise or uneven gaps.
• Compatible where the OEM diagram lists a door stop shim in the hinge/stop assembly.

• One black door stop shim

• High-level replacement: typically installs at the door stop or hinge area; may slide or snap into place—retain original orientation.
• Always support the door during removal/installation to avoid dropping or damaging the door or hinges.
• If the repair requires removing trim or hinge fasteners, keep fasteners organized and follow the appliance diagram.
• For any work near electrical components, unplug the appliance or switch off power at the breaker first.

Color: White. Size: 13 oz. Spray paint primer. can.

Color: White

The Hole Plug is an OEM part for Whirlpool refrigerators. It plays an important role in sealing openings and holes within the refrigerator door. The plug prevents air leaks, moisture intrusion, and loss of cool air that could compromise cooling performance. 

Symptoms of a bad or missing door hole plug include:

• Increased humidity and moisture buildup inside the refrigerator  
• Difficulty maintaining proper internal temperatures
• Formation of frost or ice around door openings

Causes can be normal wear and tear over time that damages or dislodges the plug. Accidental impact or damage during cleaning could also dislodge it.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Evaporator is an OEM part for Whirlpool refrigerators. As the main heat exchange component, it plays a vital role in removing heat from the refrigerator compartments to maintain proper cooling performance.

Causes of a bad evaporator can include bent fin coils inhibiting airflow, cracked or damaged tubing preventing proper refrigerant circulation, or debris buildup obstructing heat transfer.

Symptoms of a bad evaporator are:  

• Inability to maintain set temperatures inside compartments
• Frost or condensation accumulating quicker than normal  
• Unusual noises or vibrations from the refrigeration system
• Refrigerant leaks requiring high pressure service

This genuine Whirlpool evaporator coil is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators.

This replacement fan blade mounts on the refrigerator evaporator fan motor to move cold air through the freezer and fresh-food compartments, helping maintain consistent cooling and airflow. Designed to restore proper circulation when the original blade is damaged or broken. What it does:

• Replaces a cracked, warped, or missing evaporator fan blade to restore airflow across the evaporator coil
• Helps reduce uneven cooling, frost build-up, and noisy or inefficient fan operation when blade damage is the root cause
• Works with the existing evaporator fan motor to push cold air through the compartment ducts
• Compatible with applications that use a small plastic multi-vane evaporator fan blade

• One fan blade

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove interior panels and fan shroud to access the evaporator fan; note the blade orientation for correct reinstallation
• Handle the blade gently to avoid cracking; secure it onto the motor shaft per OEM alignment
• If the fan motor shows excessive noise or does not turn freely, replace the motor as well

This air baffle directs and controls airflow between compartments to help maintain even temperatures and proper air circulation inside the refrigerator. Replaces a damaged or missing baffle to restore normal airflow and cooling balance. What it does:

• Channels cold air from the freezer or evaporator to the fresh-food section to help equalize temperatures
• Helps prevent warm spots and reduces temperature swings caused by blocked or broken ducts
• Restores correct airflow when the original baffle is cracked, warped, or missing
• Works with the damper/air flow system to support efficient cooling performance

• One air baffle

• Disconnect power to the appliance before beginning any work
• Remove any shelves or drawer components necessary for access; handle plastic parts gently to avoid cracking
• Verify proper orientation and fit before snapping into place; do not force the part
• If airflow problems persist after replacement, check the damper assembly and evaporator area for ice or other obstructions

This replacement valve tube-body helps route water within the appliance's valve assembly so the dispenser and ice maker get water when called. Restores proper water flow paths and replaces a worn or damaged tube-body. What it does:

• Directs water from the main valve to the dispenser and/or ice maker in the valve assembly
• Replaces cracked, corroded, or blocked tube passages that can cause reduced flow
• Commonly used when water leaks or irregular dispensing occur near the valve area
• Works as part of the valve manifold to maintain correct internal water routing

• One valve tube-body component

• Disconnect power and shut off the water supply before servicing
• Handle small fittings and seals carefully; inspect and replace O-rings or gaskets if damaged
• Some disassembly of panels or the valve assembly is required; wiring/piping diagrams
• After installation, restore water and power and check thoroughly for leaks and proper function

Color: Bisque

Color: Black

This hinge cover conceals and protects the door hinge area, providing a clean, finished look while helping keep dust and debris out. The black finish matches compatible appliances for a seamless appearance.

• Covers the door hinge to protect hardware and improve appearance
• Helps prevent dust and debris from entering the hinge area
• Common fix when the original cover is cracked, broken, loose, or missing
• Cosmetic part; does not correct door alignment issues caused by hinge wear

• Unplug the appliance before beginning any repair
• Open the door and remove any visible screws or clips securing the cover
• Lift off the old cover and align the new cover over the hinge
• Reinstall screws/clips and verify the cover is seated securely

This genuine replacement screw secures appliance panels and components for reliable operation. Use it to replace stripped, missing, or corroded fasteners and restore proper fit and alignment for safe appliance use. What it does

• Secures panels, brackets, and small components to restore proper alignment and reduce vibration
• Replaces stripped or missing fasteners that can cause loose parts or rattling
• Helps maintain safe electrical and mechanical connections by holding components in place
• Works wherever the original matching screw was used on the appliance

• Disconnect power and water before beginning any repair
• Use the correct driver bit to avoid cam-out and head damage
• Tighten securely but avoid overtightening to prevent stripping threads or cracking plastic
• If threads are damaged, replace mating hardware or use appropriate repair inserts rather than forcing the screw

This air duct directs heated air from the dryer drum to the exhaust path, helping maintain proper airflow and drying performance. Replace a damaged or cracked duct to restore safe venting and reduce heat loss. What it does:

• Channels warm, moist air from the dryer drum to the exhaust system
• Keeps airflow directed to the vent to help clothes dry evenly
• Prevents internal air leaks that can lower drying efficiency
• Can help reduce unusual odors or hot spots caused by damaged ducting

• Disconnect power (and gas, if applicable) before servicing the dryer
• Remove the dryer top or rear access panel as needed to reach the duct
• Check adjoining seals and vent hoses for wear; replace if damaged for best performance

Color: White

This steel rear unit compartment cover replaces a damaged or corroded rear panel to protect internal components and maintain cabinet integrity. Designed for a direct, OEM-fit replacement to restore enclosure protection. What it does:

• Shields motors, wiring and controls from debris, moisture and physical contact
• Helps maintain proper airflow routing around rear-mounted components
• Prevents vibration-related wear by securing the unit compartment
• Visible rust, dents or a missing panel are common signs this cover needs replacement

• Disconnect power before access and wear gloves; edges may be sharp
• Remove service access panels to reach and unbolt the old cover; retain fasteners if reusable
• Align cover and fasten securely; verify clearance to wiring and moving parts before restoring power