Wsm2780 Ge Space Maker Parts

This tub seal assembly keeps the washer's inner tub sealed around the drive shaft to help prevent water leaks and contain wash water. It replaces a worn or damaged tub seal to restore a watertight fit. What it does

• Seals the gap between the inner tub and the transmission/drive shaft to reduce leaks
• Helps prevent water from entering the transmission area and causing damage
• Commonly replaced when you notice water on the floor or pooling under the washer
• Used when the existing seal is cracked, torn, or excessively worn

• One tub seal assembly

• Disconnect power and shut off water before starting any repair
• Replacement typically requires partial disassembly of the washer (cabinet or front panel removal) and access to the tub/transmission area
• Inspect shaft and surrounding surfaces for wear or damage and clean mounting surfaces before installing the new seal

This dryer bearing bracket secures the drum's rear bearing to keep the drum aligned and rotating smoothly. Replacing a worn bracket can help reduce drum wobble, scraping noises, and uneven drum rotation. What it does:

• Supports and locates the rear drum bearing to maintain proper drum alignment.
• Helps prevent the drum from wobbling, rubbing, or scraping against the cabinet.
• Can reduce or eliminate grinding, squealing, or thumping noises caused by a loose or damaged rear support.
• Works with the dryer's rear bearing assembly to enable consistent drum rotation.

• Disconnect electrical power (and gas, if applicable) before beginning any repair.
• Access typically requires removing the dryer drum and rear bulkhead.
• Inspect the bearing, shaft, and surrounding glides; replace any worn components to prevent repeat failure.

This light hole plug seals the unused drum-light opening in the dryer cabinet. Replacing a missing or brittle plug helps contain lint, limit drafts, and protect internal components around the opening.

• Covers the factory light opening when no drum light is installed
• Helps maintain proper cabinet airflow and lint containment
• Shields the opening from dust and moisture
• Replace if the plug is missing, cracked, hardened, or won't stay seated

• Disconnect power before servicing
• Access the light-hole location per your model's service instructions
• Press the plug fully into the hole until seated flush
• Ensure no wires or components are pinched around the opening

This rubber agitator cap seal creates a watertight barrier at the base of the washer agitator to help prevent leaks and keep the transmission area dry. It's a simple replacement that restores proper sealing around the agitator. What it does:

• Seals the agitator base to reduce water entering the transmission and cabinet area
• Helps prevent leaks that can cause rust, puddling, or damage under the washer
• Keeps contaminants and detergent residue out of the gearcase area
• Supports consistent wash performance by maintaining a dry drive assembly

• Disconnect power and turn off the water supply before starting any repair
• Remove the agitator cap and agitator per your model's service instructions to access the seal
• Inspect surrounding parts (agitator cap, agitator, and shaft) for wear and clean mating surfaces before installing the new seal

This short vertical spring provides the tension needed for the appliance's vertical hinge or mounting assembly, restoring proper movement and alignment for smooth operation and secure closure. What it does:

• Supplies vertical tension to a hinge or mounting assembly to maintain proper positioning
• Helps restore even, controlled movement of doors, panels or drawers
• Reduces sagging, slipping or uneven closing caused by a worn spring
• Minimizes rattling or misalignment during normal use

• Disconnect power to the appliance before beginning any repair.
• Springs can be under tension — wear safety glasses and use appropriate tools.
• Inspect mating hardware (clips, pins, brackets) for wear and replace if needed.

This is a replacement pointer for control panels and timer knobs that restores a clear, visible indicator of the selected setting. It helps you quickly see and select the correct cycle or temperature. What it does:

• Replaces a cracked, broken, faded, or missing pointer so the control position is visible
• Aligns with the control knob to show the active setting or timer position
• Improves usability when the original pointer is worn or detached
• Matches the original white/dark gray color for a clean appearance

• Always disconnect power (unplug the appliance or shut off the breaker) before servicing
• Remove the control knob as needed, then press the pointer into the control shaft or bezel until it seats
• Do not force the part; stop and verify the part number and control style
• Refer to the appliance owner's manual or a repair guide for model-specific removal steps

This drum vane replaces a damaged or missing dryer drum lifter that helps lift and tumble clothes for even drying and gentle fabric movement. Restores proper tumbling and reduces fabric snags when installed correctly. What it does:

• Lifts and guides clothing as the dryer drum rotates to promote even tumbling.
• Prevents clothes from bunching or staying in one spot during a cycle.
• Reduces scraping, thumping, or uneven noise caused by a broken or missing vane.
• Helps maintain proper drum rotation and load distribution.

• Disconnect power to the appliance before starting any repairs.
• Access the drum per your model's service instructions (front panel or cabinet removal may be required).
• Align the vane with the drum mounting points and secure using the original fasteners; replace damaged clips or screws if needed.
• After reassembly, run a short no-heat cycle to ensure smooth drum rotation and correct installation.

This ATC temperature control board regulates the refrigerator's temperature and ensures consistent cooling cycles by directing fans, compressors, and defrost operations. Replaces a failed control board to restore normal temperature control and cycle timing. What it does:

• Controls thermostat signals to the compressor and evaporator fan for stable internal temperatures
• Manages defrost cycles and related heater operation if applicable to the model
• Helps stop erratic cooling, excessive frost buildup, or continuous running when the board fails
• Works as the electronic decision hub when mechanical thermostats are replaced by board-driven control systems

• One ATC temperature control board (WH12X10386)

• Disconnect power and unplug the appliance before starting any repair
• Handle the board by its edges and avoid touching circuitry to prevent ESD damage
• Verify harness connector orientation and secure all plug connections; do not force connectors

This lid lock assembly replaces a worn or broken washer lid lock so the machine can secure the lid during cycles and complete spin/drain operations. Restores the safety interlock and allows normal cycle starts when installed. What it does:

• Secures the washer lid during agitation and spin to prevent accidental opening
• Prevents the washer from starting or advancing cycles when the lid is not locked
• Releases the lid when a cycle ends so the user can open the washer
• Commonly used when the lid won't lock, won't release, or the washer won't start

• Disconnect power to the washer before starting any repair
• Match the part number and orientation with the existing lock; keep fasteners for reuse unless new ones are supplied
• Test a short cycle after installation to ensure the lock secures and releases properly