Wt20gkxdn10 Parts

This part is a replacement carburetor adapter. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective carburetor adapter in a variety of leaf blower models.The carburetor adapter connects the carburetor to the engine and thus is a critical equipment component. This part will need to be immediately replaced if broken, detached, or otherwise rendered ineffective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this input carburetor adapter, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this carburetor adapter is suitable for use on several different models of leaf blowers manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This fuel tank gasket is a genuine Husqvarna part, sold individually. This fuel tank gasket can be used as a replacement part for a leaf blower. The purpose of the fuel tank gasket for a leaf blower is to seal off the fuel tank from the accumulation of dirt, debris, pebbles, and clumped leaves; additionally, the fuel tank gasket prevents leaks that could stem from a fuel tank or a fuel line that has been damaged.The fuel tank gasket might have to be replaced in the event that it can no longer serve its vital function of sealing off the fuel tank from external or internal damage. If the fuel tank gasket has been torn, scraped, punctured, warped, or eroded to the point that it no longer tightly seals off its components, the part should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank gasket is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, and Poulan.

This is a connecting rod assembly used in many types of lawn and garden equipment. It is made of durable metal and connects the engine crankshaft to the piston. The connection rod assembly is also tasked with transferring power to the crankshaft from the piston. This is an important component that is required for the proper functioning of an internal combustion engine.If the connecting rod assembly has gone bad, it can cause knocking sounds from the engine, low oil flow and pressure, and excessive oil consumption. In some cases, a broken connecting rod assembly will also result in an overheating engine. If the connecting rod assembly has gone bad, a wrench and screwdriver will be needed to replace it. Make sure to wear work gloves, disconnect the spark plug wire, and let the engine cool before working on the part.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The connecting rod assembly is designed for use with string trimmers, hedge trimmers, leaf blowers, edgers, and pole prunes manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

The carburetor gasket/diaphragm kit here is for use with a range of different handheld lawn and garden machines. The gaskets and diaphragm are used as a means to prevent air leaks from getting into the carburetor. If there is too much air getting into the carburetor, it can cause problems with the air to fuel mixture. This could result in the engine running rough or it could even cause problems starting the engine. The gaskets that come with the machine tend to be high quality, but they will not last forever. Eventually, they can start to crack and fall apart. When this happens, air leaks will cause problems with the carburetor and engine. It is always a good idea to replace the gaskets whenever they show signs of wear. Users should also add new gaskets whenever they are working on parts of the engine that require them. This is a genuine OEM replacement carburetor gasket/diaphragm kit. The kit is sold individually and works with many models of string trimmer, leaf blower, and hedge trimmer. Compatible brands include Husqvarna, Weed Eater, Craftsman, Poulan, and Poulan Pro.

This certified OEM replacement part is a carburetor kit for a gas-powered leaf blower engine. For gas to ignite in an engine, there has to be the right amount of air in the system. Without oxygen, the spark won't light and the gasoline will not ignite. A carburetor is responsible for maintaining the right balance of air and gasoline. Therefore, without a properly functioning carburetor, the engine will also not function properly. Carburetors begin to break down over time because of built up exhaust and gunk in the engine. As this grime builds up, the carburetor cannot get enough air and the balance is thrown off. While carburetors can sometimes be cleaned, if it has become overly clogged or damaged, it will need to be replaced. Signs of a faulty carburetor include shakiness and black smoke, backfiring, hard starts, or an engine that will not start at all. Replacing a leaf blower's carburetor requires the crankcase line, primer line, fuel line, air filter, and throttle linkage to all be disconnected using pliers and a screwdriver. This part is intended for Craftsman, Poulan, Weed Eater, and Husqvarna leaf blowers and is sourced from the original manufacturer. It ships individually.

This replacement part is an elbow tube. This is a genuine replacement part made by Husqvarna. This part is able to connect different parts and other types of tubes so that items can be expelled from the machine properly. A new elbow tube might be needed if it is damaged in any way. This can include being dented, bent, or cracked. Be sure to check the flow of the tube before attempting to repair it. It is recommended that the engine be powered off before trying to replace this part. This elbow tube is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This is a genuine carburetor screw that is designed to replace missing or broken screws in certain lawn and garden equipment engines. On select models of small engines, there are two carburetor screws that are used to secure the carburetor to the rest of the engine assembly. These screws are made of durable material, but also constantly exposed to high heat and constant vibrations. They may become worn, damaged, or even snap off entirely as a result. They sometimes also get lost in the process of other repairs and will need to be replaced. This genuine OEM part will offer the solution for compatible engines. This OEM carburetor screw is compatible with hedge trimmers, edger/trimmer models, and blowers that use the appropriate engine. There are over 150 models that take this carburetor screw, including those from Husqvarna, Paramount, Weed Eater, Jonsered, and Poulan. This durable screw is sold as a single unit and features a hex socket head, so be sure to have the proper tool for installation. Those who need to replace both screws will have to purchase two separately. Be sure to allow the engine to cool completely and wear gloves whenever replacing screws or performing other engine repairs.

This replacement screw is intended for use on a variety of lawn and garden tools to attach components. It is a genuine OEM part sourced directly from the manufacturer. It is used to attached the trimmer head to the shaft in weed eaters and in many other applications on other tools. Overuse and normal wear and tear can cause damage to the screw. The screw can also become stripped when it is over-tightened or bent from contact with heavy debris. The screw will need to be replaced if this happens. Routinely inspecting equipment will help reveal broken or missing screws that need to be replaced or tightened. This screw is a star-slotted screw that requires a Torx screwdriver to remove it from the machinery. If the screw is in a tight-fitting area, an extension socket with a Torx bit can be used to remove the screw and to install a new one. When replacing a screw, check the remaining screws for damage and tighten any that are loose. This screw is a silver-colored, heavy-duty metal screw sold individually. It is compatible with trimmers, leaf blowers, leaf vacuums, hedge trimmers, and other equipment manufactured by Craftsman, Weed Eater, Poulan, and Husqvarna.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.