Wt7300cv Parts

The Noise Filter is an OEM part for LG Washers. This part is responsible for reducing electrical noise and interference from the incoming power supply. It filters out unwanted electrical signals and prevents them from affecting the performance of your washing machine. It helps to maintain a stable power supply, minimizing the risk of electrical disruptions during the wash cycle.

A bad Noise Filter can occur due to power surges, electrical faults, or general wear and tear over time. If the noise filter board becomes faulty, you may experience issues such as excessive electrical noise, interference, or even complete power failure.

Symptoms of a bad Noise Filter include:

• Loud electrical buzzing or humming noises during operation.
• Random power fluctuations or interruptions.
• Inconsistent or erratic behavior of the washing machine controls.

If you're experiencing any of these issues, it's time to replace the Noise Filter with this genuine LG part to restore the electrical stability and performance of your washing machine. This OEM LG part can also be used on Kenmore/Sears appliances.
 

The Stator Assembly is an OEM part for LG top load washing machines. As an electrical component, it is responsible for powering the motor that spins the washing drum. The stator contains electromagnetic coils that generate a rotating magnetic field to drive the inner rotor and suspension assembly when energized. 

Symptoms of a bad stator assembly include: 

• The washing machine fails to agitate clothes properly  
• Unusual noises emanating from the motor area
• The drum spins slowly or fails to spin during cycles
• Drive issues arise such as not completing cycles 

Causes can be a failure of coil windings over time, moisture ingress causing electrical shorts or faulty electronic speed/voltage regulation.

This LG replacement part is suitable for Kenmore top-load models as well.

This top cover is the outer cabinet panel that restores the appliance's upper surface and protects internal components from dust and damage. It provides a clean, finished look and replaces worn or damaged tops. What it does:

• Replaces a dented, cracked, or corroded top surface to improve appearance and protect internals
• Helps prevent debris and moisture from entering the appliance cabinet
• Restores proper fit and alignment of the upper cabinet area
• Reduces gaps that can interfere with control access or allow dust buildup

• Disconnect power (and water if applicable) before starting any repair
• Use proper hand protection; edges may be sharp during removal and installation
• Basic hand tools are typically required; follow the steps

This is a small flat hardware washer used with fasteners to distribute load and prevent loosening on appliance assemblies. It helps keep screws and bolts seated for a secure, stable connection. What it does

• Sits under a screw or bolt head to spread pressure and protect the mating surface
• Helps prevent fasteners from pulling through soft or thin materials
• Reduces loosening from vibration when paired with the correct screw or bolt
• Can eliminate play or rattling where a missing washer allowed movement

• One flat washer as pictured

• Disconnect power before servicing the appliance and follow manufacturer safety instructions
• Replace only with the same style and size washer for proper fit and function
• Hand tools are normally sufficient; ensure fasteners are tightened to the OEM recommendation
• If multiple washers are missing or damaged, inspect surrounding hardware for wear

The Nozzle Assembly is an OEM part for LG washing machines. Located inside the tub, this is the nozzles responsible for directing water spray during cycles.

Causes of a bad nozzle assembly can include clogged or blocked spray ports from residue buildup, cracks or breaks in plastic components from general wear, or damage like dents that disrupt water flow.

Symptoms of a faulty nozzle assembly include:

• Uneven or incomplete water distribution inside the tub
• Reduced spray pressure from certain areas
• Loud vibrations or rattling noises during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

This single wire harness connects electrical components to restore a secure signal and power path. Replacing a damaged harness helps stop intermittent operation and restores reliable function to the affected circuit. What it does:

• Provides a factory-style electrical connection between components
• Replaces damaged, frayed, or corroded wires that cause intermittent operation
• Helps resolve symptoms like no power to a circuit, control not responding, or sporadic operation
• Maintains proper routing and connector fit to reduce arcing and poor contact

• Disconnect power before servicing to avoid shock or damage
• Inspect connectors and mating terminals for damage before installation
• Route harness away from heat sources and moving parts; secure with existing clips

This detergent box assembly replaces the washer's front detergent/dispenser drawer so detergents and additives dispense cleanly during cycles. It restores proper product delivery and helps reduce residue build-up in the dispenser area. What it does:

• Houses and channels liquid and powdered detergents and additives into the wash at the correct time
• Prevents detergent from pooling or leaking into the washer cabinet when functioning correctly
• Reduces visible residue and clogging in the dispenser area that can affect dispensing
• Compatible with front-load washer detergent/dispenser systems that use a removable drawer

• One detergent box assembly

• Remove power and water supply before beginning service
• Typically installs by sliding into the dispenser housing and securing any retaining clips or screws
• Inspect surrounding seals and rails for damage and clean any residue before installing the new assembly

This genuine replacement parts assembly secures and organizes the appliance's internal components so they function together reliably. Use it to replace a worn or damaged sub-assembly and restore stable operation. What it does:

• Holds internal components in their proper position to prevent movement and wear
• Restores correct mechanical alignment that can stop unusual noises or vibration
• Re-establishes reliable connections between linked parts so the appliance runs normally
• Addresses symptoms such as rattling, loose internal components, intermittent operation, or parts that shift during use

• Disconnect power (unplug or shut off breaker) before starting any repair
• Follow the OEM instructions for disassembly and reassembly
• Use basic hand tools; avoid forcing fasteners or connectors to prevent damage

This cover cap is a small trim piece that snaps into place to protect and conceal fasteners and internal components, restoring the appliance's finished appearance. It prevents dirt entry and helps keep surrounding parts secure. What it does:

• Covers exposed screws and openings to improve cosmetics
• Protects underlying components from dust and debris
• Helps keep trim and panels aligned when installed
• Commonly replaced when cracked, broken, or missing

• One cover cap

• Disconnect power (and water if applicable) before servicing the appliance
• Typically installs by snapping into position; lightweight trim may require a small flat screwdriver to remove old piece
• Inspect surrounding clips/tabs for damage and replace if worn to ensure a secure fit
• Handle plastic parts gently to avoid cracking during install

This holder assembly is a direct replacement mounting bracket that secures refrigerator internal components so they stay properly positioned and function reliably. Replaces a cracked or loose bracket to restore stable support and reduce rattling. What it does

• Secures internal components or assemblies to the cabinet to prevent shifting and vibration
• Restores proper alignment when a cracked or broken holder causes loose parts
• Helps stop rattling, knocking, or intermittent contact caused by a failed mount
• Works as a structural replacement—matches OEM fit and mounting points

• One holder assembly

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove nearby shelves, bins, or trim for access as needed; keep small fasteners organized
• Typically installs with basic hand tools; do not overtighten fasteners to avoid cracking
• If the part attaches to electrical components, verify connectors are secure before restoring power

This multi wiring harness routes power and control signals between the appliance control and multiple components, restoring proper electrical connections and reliable operation. Use when damaged wiring or connectors cause intermittent or no function. What it does:

• Links the main control board to sensors, switches, motors or other components via pre-terminated connectors
• Replaces frayed, burnt or broken wires that can cause intermittent operation or component failure
• Helps restore lost power or signal to affected circuits
• Prevents arcing and poor connections caused by damaged terminals

• One multi wiring harness as shown

• Disconnect power (unplug or shut off breaker) before starting any repair
• Label or photograph connector locations to ensure correct reassembly
• Inspect mating connectors and terminals for damage; replace if corroded or melted
• Route and secure the harness away from heat sources and moving parts; avoid pinching or sharp edges

This is a common nut used to secure appliance components and fasteners, restoring a tight connection for safer, quieter operation. Replaces a worn or missing nut to help stop loose panels, rattling, or shifting parts. What it does:

• Secures brackets, panels, or fasteners to keep components properly mounted
• Restores clamping force to prevent vibration-related noise
• Helps stop loose or wobbly parts that can lead to component wear
• Small hardware replacement for routine repairs and reassembly

• Disconnect power and water before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Thread onto matching bolt stud; tighten until snug—do not overtighten
• If threads are damaged, replace both nut and mating fastener