Wt7300cv Parts

This damper controls airflow into the refrigerator compartment to maintain even temperatures and proper cooling. Replaces a worn or stuck damper to help restore correct air distribution and reduce temperature swings. What it does:

• Opens and closes the air inlet to regulate cold air from the freezer into the fridge compartment
• Helps maintain even temperatures and prevents sections from becoming too warm or too cold
• Commonly replaced when damper is stuck, noisy, or not responding and fridge temperatures fluctuate
• Works with the fridge's control system to modulate airflow as needed

• One damper assembly

• Disconnect power before beginning any repair to avoid electrical shock
• Access typically requires removing interior panels or trim in the refrigerator compartment; keep fasteners organized
• Verify actuator orientation and proper linkage engagement before reassembly

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

This bracket assembly secures internal components to the appliance frame, restoring proper alignment and structural support for panels or shelves. Replacing a damaged bracket helps stop rattling, sagging, or misaligned parts for safer operation. What it does:

• Provides a stable mounting point to hold panels, shelves, or other internal parts in place
• Restores proper fit and alignment to reduce noise, vibration, and rubbing
• Prevents further wear by re-securing loose or sagging components
• Works with factory fasteners to maintain original structural support

• One bracket assembly as shown

• Before replacing, unplug the appliance or switch off power at the breaker to avoid electrical hazard
• Use appropriate hand tools; verify bracket orientation against removed part before tightening
• Keep all original screws and clips; only secure to factory mounting points
• If corrosion or additional damage is present, inspect adjacent parts and replace as needed

The Washing Machine Drain Pump is an OEM part for LG washing machines. It is responsible for effectively draining water out of the washing machine after each cycle. The pump works to remove water from the tub and drain hoses, preparing the machine for the next load.

Causes of a bad drain pump can include mineral or limescale buildup that causes clogs or decreased efficacy over time, seals or gaskets wearing out, or damage to internal components.

Symptoms of a bad drain pump include:

• Water not fully draining out of the machine after cycles
• The washer not filling properly due to excess water remaining
• Loud vibrating or grinding noises coming from the pump
• Leaks or water residue around the pump area

This LG part is also compatible with some Kenmore models.

The PCB Assembly Main is an OEM part for LG washing machines. As the central control unit, this printed circuit board regulates all functions of the washer including cycle selections, temperatures, spin speeds, and diagnostic systems.

Causes of a bad main PCB include natural wear and tear over time, moisture damage, power surges, or fluctuations that compromise electronic components. 

Symptoms of a failed PCB assembly include:

• The washer not starting or powering on at all  
• Inability to select or change wash cycles
• Error codes displayed
• No response from control buttons and displays

This LG replacement part is also compatible with select Sears/Kenmore models. 

The Clutch Coupling & Housing Assembly is an OEM component for LG front-loading washers. This assembly contains the clutch coupling that links the motor to the drive components to rotate the washing drum. 

Symptoms of a bad clutch coupling include:

• The washing machine fails to agitate or spin clothes  
• Grinding or clanking noises occur during cycles
• The drum does not turn properly or feels obstructed
• Excessive vibration when spinning 

Causes of failure can be wear and tear over time, damage from loads that are too heavy or unbalanced, or debris buildup inside the housing.

Replace yours today with this genuine OEM LG assembly to restore optimal operation and prevent further wear. This replacement part is compatible with some Samsung, Frigidaire, and Kenmore models.

The Lid Switch Assembly is an OEM component specifically designed for LG washers. This assembly includes the lid switch, which plays an important safety role by detecting when the washer lid is properly closed and locked. 

The lid switch assembly monitors the position of the washer lid and communicates with the control board to prevent operation if the lid is detected as open. It ensures the wash cycle only functions when the lid is securely shut, minimizing safety hazards.

Symptoms of a bad lid switch include:

• The washer fails to detect when the lid is closed
• Inability to select or start a cycle 
• Error codes related to the lid being open

Replacing the lid switch with this genuine OEM LG part can restore proper safety functions to your washer. This replacement part is also compatible with Sears/Kenmore models.

This multi-connector wiring harness routes power and signals between appliance controls and components, restoring reliable connections for proper operation. It replaces a damaged or worn harness to help resolve intermittent power or control issues. What it does:

• Links control board, sensors, and motors through multiple molded connectors
• Transfers power and low-voltage signals needed for normal appliance operation
• Commonly used to address intermittent electrical faults, unresponsive controls, or components that fail to receive power
• Provides factory-style connector fit to simplify reconnection during repairs

• Disconnect power (unplug or disconnect breaker) before starting any repair.
• Confirm connector orientation and seating before reapplying power; match keyed connectors only to their mating plugs.
• Inspect connectors and wiring routing for chafing or damage; replace if any wires or terminals are compromised.