Wt7840cw Parts

This heater assembly replaces the dryer's heating element and housing to restore warm airflow for drying cycles. It's a direct-replacement assembly that re-establishes the appliance's heat source when the dryer won't heat properly. What it does:

• Houses the electric heating element that produces heat for drying cycles
• Replaces a burned-out element, open circuit, or damaged housing that can stop the dryer from heating
• Helps resolve symptoms such as no heat, only air tumbling, or weak/partial heating
• Works with the dryer's blower and thermostat to deliver consistent drying temperatures

• One heater assembly (heating element installed in housing)

• Disconnect power to the dryer (unplug or shut off breaker) before servicing
• Allow components to cool and wear gloves to protect hands from sharp edges
• Verify the part number matches the dryer's parts list before installation

This multi wire harness routes power and signals between appliance controls and electrical components, restoring reliable connections for proper operation. Use it to replace damaged or corroded wiring that causes intermittent power or unresponsive parts. What it does:

• Connects multiple control boards, sensors, motors or valves to a single wiring network
• Replaces frayed, burned, or broken wires that cause intermittent operation or loss of function
• Helps resolve symptoms like components not receiving power, intermittent runs, or communication faults
• Maintains correct wire routing and plug pinouts to prevent miswiring when installed correctly

• One multi wire harness as pictured

• Disconnect power to the appliance before servicing to avoid shock or damage
• Match connector shapes and wire colors; do not force connectors or alter terminals
• Inspect mating connectors and mounting points for damage; replace any corroded parts

This is a common nut used to secure appliance components and fasteners, restoring a tight connection for safer, quieter operation. Replaces a worn or missing nut to help stop loose panels, rattling, or shifting parts. What it does:

• Secures brackets, panels, or fasteners to keep components properly mounted
• Restores clamping force to prevent vibration-related noise
• Helps stop loose or wobbly parts that can lead to component wear
• Small hardware replacement for routine repairs and reassembly

• Disconnect power and water before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Thread onto matching bolt stud; tighten until snug—do not overtighten
• If threads are damaged, replace both nut and mating fastener

The Drain Hose Assembly is an OEM component designed for LG front-loading washers. This assembly consists of the hose that directs wastewater from the washer to the drain during drain cycles. 

Causes of a bad drain hose assembly can include cracks, leaks, or blockages developing over multiple uses, exposure to harsh chemicals, or accidental impact damage.

Symptoms of a bad drain hose include:

• Water failing to drain or poor drainage from the washer
• Puddles or pooling of water near the washer  
• Sputtering or spraying of water during drainage
• Leaks occurring around hose connections

Replace yours today with this genuine OEM LG assembly to ensure proper draining and prevent costly water damage. This replacement part is compatible with Samsung, Kenmore, and some Whirlpool model washers.

This bracket assembly secures internal components to the appliance frame, restoring proper alignment and structural support for panels or shelves. Replacing a damaged bracket helps stop rattling, sagging, or misaligned parts for safer operation. What it does:

• Provides a stable mounting point to hold panels, shelves, or other internal parts in place
• Restores proper fit and alignment to reduce noise, vibration, and rubbing
• Prevents further wear by re-securing loose or sagging components
• Works with factory fasteners to maintain original structural support

• One bracket assembly as shown

• Before replacing, unplug the appliance or switch off power at the breaker to avoid electrical hazard
• Use appropriate hand tools; verify bracket orientation against removed part before tightening
• Keep all original screws and clips; only secure to factory mounting points
• If corrosion or additional damage is present, inspect adjacent parts and replace as needed

The Washing Machine Drain Pump is an OEM part for LG washing machines. It is responsible for effectively draining water out of the washing machine after each cycle. The pump works to remove water from the tub and drain hoses, preparing the machine for the next load.

Causes of a bad drain pump can include mineral or limescale buildup that causes clogs or decreased efficacy over time, seals or gaskets wearing out, or damage to internal components.

Symptoms of a bad drain pump include:

• Water not fully draining out of the machine after cycles
• The washer not filling properly due to excess water remaining
• Loud vibrating or grinding noises coming from the pump
• Leaks or water residue around the pump area

This LG part is also compatible with some Kenmore models.

The Clutch Coupling & Housing Assembly is an OEM component for LG front-loading washers. This assembly contains the clutch coupling that links the motor to the drive components to rotate the washing drum. 

Symptoms of a bad clutch coupling include:

• The washing machine fails to agitate or spin clothes  
• Grinding or clanking noises occur during cycles
• The drum does not turn properly or feels obstructed
• Excessive vibration when spinning 

Causes of failure can be wear and tear over time, damage from loads that are too heavy or unbalanced, or debris buildup inside the housing.

Replace yours today with this genuine OEM LG assembly to restore optimal operation and prevent further wear. This replacement part is compatible with some Samsung, Frigidaire, and Kenmore models.

The Lid Switch Assembly is an OEM component specifically designed for LG washers. This assembly includes the lid switch, which plays an important safety role by detecting when the washer lid is properly closed and locked. 

The lid switch assembly monitors the position of the washer lid and communicates with the control board to prevent operation if the lid is detected as open. It ensures the wash cycle only functions when the lid is securely shut, minimizing safety hazards.

Symptoms of a bad lid switch include:

• The washer fails to detect when the lid is closed
• Inability to select or start a cycle 
• Error codes related to the lid being open

Replacing the lid switch with this genuine OEM LG part can restore proper safety functions to your washer. This replacement part is also compatible with Sears/Kenmore models.

The PCB Assembly is an OEM part specifically designed for LG front-load washers. It controls critical functions like the user interface, motors, pumps, and sensors needed to operate wash cycles. 

Causes of a bad PCB Assembly can include damage from power surges, water leaks, or other accidents over time. Electronic components are susceptible to failure from prolonged use.

Symptoms of a bad PCB Assembly include:

• The washer failing to turn on or not responding to control inputs
• Error codes appearing frequently during cycles  
• Inability to progress through cycles or change settings
• Abnormal sounds coming from internal components

Replacing with this genuine LG PCB Assembly restores full functionality and ensures safe, dependable performance. This LG replacement part is also compatible with Sears/Kenmore.

This cover cap is a small trim piece that snaps into place to protect and conceal fasteners and internal components, restoring the appliance's finished appearance. It prevents dirt entry and helps keep surrounding parts secure. What it does:

• Covers exposed screws and openings to improve cosmetics
• Protects underlying components from dust and debris
• Helps keep trim and panels aligned when installed
• Commonly replaced when cracked, broken, or missing

• One cover cap

• Disconnect power (and water if applicable) before servicing the appliance
• Typically installs by snapping into position; lightweight trim may require a small flat screwdriver to remove old piece
• Inspect surrounding clips/tabs for damage and replace if worn to ensure a secure fit
• Handle plastic parts gently to avoid cracking during install