Wtgy Parts

The Drum is an OEM part for Bosch dryers. Located inside the cabinet, this drum holds clothes during the drying cycle.

Causes of a bad drum can include rusting from wear over many cycles, dents from heavy loads impacting the surface, or cracked welds compromising integrity.

Symptoms of a bad drum include:

• Excessive drying times or wet clothes after cycles
• Noise or vibration due to an imbalance
• Loose or detached mounting points
• Chaffed or ruined clothing from rough surfaces

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Power Cord is an OEM part for Bosch electric dryers. It provides power to heating elements and motor components, enabling all dryer functions. Working seamlessly behind wall panels and the control board, the cable supply facilitates safe and reliable drying performance cycle after cycle.

Symptoms of a bad power cord include:

• The dryer fails to power on or heat
• Flickering lights or control issues  
• Burning smells coming from internal areas
• Cable sheathing showing defects or damage

Causes for failure relate to insulation breaks, fraying, or cuts to wiring over time. Accidental impact, animal/insect damage, or general wear and tear may also degrade cable supply integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This turntable support ring sits beneath the glass tray in your microwave. It allows the tray to roll smoothly for even heating and helps prevent wobbling or binding during rotation.

• Supports the glass turntable so it rotates evenly
• Reduces friction to prevent squeaks, jerks, or stalled rotation
• Helps improve cooking performance by promoting consistent movement
• Common fix when the turntable sticks, wobbles, or makes grinding noises

• Unplug the appliance before service and let it cool
• Remove the glass tray; lift out the old ring and place the new ring in the track
• Ensure the ring sits flat and the tray engages properly with the drive coupler
• Test rotation with an empty tray before normal use

This cooling system assembly directs airflow to protect electronics and components from heat buildup, helping the appliance run reliably and avoid heat-related faults. It replaces a worn or damaged cooling module to restore proper ventilation. What it does:

• Channels cooling air across control boards, motors, or power electronics to prevent overheating
• Helps stop heat-related failures, thermal shutdowns, and premature component wear
• Supports consistent operation and can reduce hot spots inside the appliance
• Works as part of the appliance's thermal-management system to maintain safe temperatures

• Disconnect power and follow all safety precautions before starting any repair
• Handle wiring and connectors carefully; avoid stressing harnesses or circuit boards

This programmed operating module is the appliance's user interface control. It interprets button/selector inputs, drives the display or indicator lights, and communicates with the main control so selected programs respond and run correctly.

• Interprets keypad/selector inputs and sends commands to the control system
• Powers and updates display/LED indicators and status tones
• Enables start/pause/cancel and option selections
• Typical symptoms of failure: unresponsive controls, blank/flickering display, erratic inputs, won't start a program, UI communication error codes

• Disconnect power at the breaker before servicing; allow capacitors to discharge
• Use ESD protection and handle the board by its edges
• Transfer any model-specific trim/overlay and reconnect harnesses one at a time, ensuring full seating
• After reassembly, restore power and run the appliance's test/program check for proper operation

This replacement seal restores a tight, leak-resistant connection between mating components inside your appliance. Replacing a worn seal helps stop drips at the joint and keeps the system operating reliably without nuisance leak faults.

• Forms a compressible barrier between parts to prevent leakage at a connection point
• Helps protect nearby components from moisture intrusion and corrosion
• Typical failure signs: moisture around a joint, puddling beneath the unit, or leak/overflow error messages
• Replace if the original is cracked, flattened, cut, brittle, or missing

• Disconnect power and shut off the water supply before servicing
• Access the connection, note the seal's orientation, and remove the old seal
• Clean mating surfaces; lightly moisten the new seal and seat it evenly without twisting or pinching
• Reassemble and test for leaks before reinstalling covers or panels

This is the program selector knob that mounts on the control panel's selector switch. It lets you grip and turn the program switch to choose cycles; replacing a cracked or loose knob restores smooth, accurate selection. What it does:

• Attaches to the selector switch shaft so you can set programs/cycles
• Provides a secure grip and proper indexing of cycle positions
• Keeps selections aligned with the control markings for accurate settings
• Common symptoms: cracked/broken knob, spins freely or falls off, cannot select cycles, or must turn the bare shaft with pliers

• 1 program selector knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the selector shaft; apply even, straight pressure to avoid stressing the control panel
• Align the keyed hub/orientation with the shaft and press firmly until fully seated
• Rotate through all positions to ensure smooth engagement and correct alignment

This is the inner glass window for an oven door that restores a clear view into the cavity and helps contain heat. It replaces damaged or cracked inner door glass to improve safety and oven performance. What it does:

• Replaces cracked, chipped, or shattered inner oven door glass
• Restores a clear view of cooking without opening the door
• Helps maintain proper heat containment for consistent cooking
• Reduces risk of glass-related injuries or further damage to the door assembly

• Disconnect power to the appliance and let the oven fully cool before starting.
• Handle glass with heavy-duty gloves and eye protection to avoid cuts.
• Installation often requires removing the oven door and separating door panels; follow the oven manufacturer's instructions.
• If any clips, gaskets, or fasteners appear damaged, replace them to ensure a proper seal.

Replace a cracked or worn console facia with this facia panel. It restores a clean factory appearance and secure fit for the control area so buttons and displays align properly and the console mounts solidly.

• Provides the finished exterior trim for the control console
• Supports and aligns user interface components behind the panel
• Helps secure the console to the appliance front with correct fitment
• Common reasons to replace: cracked plastic, broken tabs, loose/rattling console, worn or damaged surface

• Disconnect power to the appliance before servicing
• Access the console, remove retaining screws/clips, and release locking tabs carefully
• Transfer any reusable components from the old panel to the new panel and verify alignment before tightening fasteners
• Avoid overtightening screws and protect the surface finish during reassembly

This display mounts behind the control panel and provides the readout for settings, time, and status. Replacing a failed display restores a clear, reliable view of your appliance's operating information and alerts.

• Presents cycle/status information and remaining time as provided by the control
• Communicates prompts or fault/error indications on the control panel
• Common failure symptoms: blank/dark screen, dim or flickering display, missing/garbled segments, or intermittent readout
• Installs in the control panel area; interfaces with the appliance's main control

• Disconnect electrical power before servicing
• Remove the control panel/fascia to access the display; note connector orientation
• Handle the electronics with ESD care; avoid touching circuitry and LED elements
• Transfer any light pipes, seals, or brackets from the original part if applicable, then test before final reassembly

A mechanical door latch assembly that secures the dishwasher door during operation to allow cycles to run and help prevent water leaks. Replaces a worn or broken latch so the door closes and locks reliably. What it does

• Secures and locks the dishwasher door so the control can start and maintain a wash cycle.
• Stops the door from reopening mid-cycle, helping prevent water spills.
• Can resolve symptoms such as the dishwasher not starting, displays error codes related to door/latch, or a loose/broken door catch.
• Operates as the physical locking mechanism — no electronic control functions included.

• One mechanical door latch assembly.

• Disconnect power to the appliance before beginning work to avoid shock; turn off water if accessing inner panels.
• Remove the inner door panel or access panel to access and replace the latch; keep fasteners organized.
• Verify correct alignment and smooth operation of the latch before reassembling the door panels; do not force parts.

This replacement lid is the top cover that protects internal components and restores the appliance's finished appearance. It helps keep water, dust, and debris out of the cabinet while providing a secure closure for normal use. What it does:

• Covers and protects internal components from moisture, lint, and debris
• Restores a flush, finished look to the appliance top and control area
• Helps the appliance maintain proper sealing and alignment at the top panel
• Replaces cracked, warped, or missing lids that can expose internal parts

• Disconnect power and water before starting any repair.
• Handle carefully to avoid scratching the finish; use proper lifting/support for larger lids.
• Basic hand tools are typically required; follow the appliance service manual for disassembly/reassembly steps.

This programmed power module is the appliance's electronic power-control unit that replaces a failed module to restore proper power delivery and control functions. It arrives pre-programmed for direct swap in compatible units. What it does:

• Regulates power and control signals to the appliance's main systems
• Replaces a defective module that can cause intermittent power, failure to start, or error codes
• Helps restore normal operation when symptoms point to a failed control/power board
• Matches OEM form and connector layout for a straightforward replacement

• Disconnect power to the appliance before starting any repair
• Handle the module carefully and ground yourself to avoid static damage
• Swap the module with the identical OEM part number and ensure all connectors are fully seated