Wtv74100 Parts

This heating element heats dishwasher wash water and supports drying performance by raising and maintaining wash and rinse temperatures. Designed to replace a failed or damaged tub heater and restore proper cleaning and drying. What it does:

• Warms wash and rinse water so detergents activate and soils are removed
• Helps the drying cycle by maintaining elevated tub temperatures
• Commonly linked to symptoms like no heat during cycles, poor cleaning, or persistent wet dishes
• Works as the heated water source; a faulty element can cause cycle errors or incomplete programs

• Heating element (1)

• Disconnect power before accessing or replacing the element to avoid electric shock
• Element typically mounts at the tub base; follow your model's service manual for access and steps
• Inspect wiring and connectors for heat damage and replace if corroded or frayed

This heating element supplies the heat needed for the dryer to dry clothes efficiently. Replaces a worn or failed heater assembly to restore normal drying performance and help prevent extended cycle times. What it does:

• Heats incoming air inside the dryer so tumbling clothes can dry
• Commonly replaced when dryer runs but produces little or no heat
• Resolves symptoms like long dry cycles, damp clothes after a full cycle, or heating that cycles off unexpectedly
• Works as the main thermal source; interfaces with the dryer's blower and thermostat system

• One heating element assembly (single unit as shown)

• Disconnect power at the breaker or unplug the dryer before service
• Access typically requires removing the dryer's front or rear panel; handle element edges carefully to avoid damage
• Check and replace any damaged wiring and ensure thermostats/thermal fuses are functioning before reassembly

The Drum Baffle is an OEM part for Bosch dryers. It is an internal plastic ribbed component that is securely attached inside the dryer drum.

The drum baffle helps move the clothes and helps circulate air flow evenly throughout the load during the drying cycle. 

Causes of a bad baffle include normal wear and tear from extended use. Heat cycling also makes the material more brittle. Accidental damage during maintenance is possible.

Symptoms of a bad drum baffle include:

• Sections of clothes not drying fully or taking excessively long to dry
• Excessively loud vibrations or noises heard from the dryer drum
• Premature failure of other components like heating elements

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement fan drum directs airflow inside the dryer to help move heated air through the drum and vent system, restoring proper ventilation and reducing rubbing or noise caused by a damaged housing. What it does

• Channels air from the blower into and through the dryer drum for effective airflow
• Helps maintain consistent drying performance when the housing is intact
• Stops rubbing, scraping, or vibration caused by a cracked or warped fan drum
• Works with the blower assembly and drum to prevent airflow restrictions that can cause longer dry times

• One fan drum housing

• Disconnect power (and turn off gas supply for gas models) before servicing
• Handle sharp edges carefully; wear gloves
• Replacement may require removing the dryer top/front panel and drum;

The Tension Roller is an OEM part for Bosch dryers. This part maintains the correct tension on the drive belt to ensure smooth and efficient operation. The tension roller ensures that the belt is tightly secured around the drum, allowing it to rotate smoothly and evenly during cycles.

The need for replacement can stem from normal wear and tear over time, as the roller can become worn or damaged, affecting its ability to maintain proper tension on the belt. 

Symptoms of a failing Tension Roller include:

• Unusual noises, such as squeaking or grinding, coming from the dryer when it is running. 
• The dryer drum not spinning correctly or at all, which can occur if the tension roller is not providing the necessary support and tension for the belt.
• Excessive vibration during operation, suggesting that the drive belt is not tensioned properly

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This part is a dryer motor assembly. It is located on the back of the appliance. The part is responsible for turning the dryer blower and drum. Make sure the dryer is free of lint and regularly clean the dryer vents to keep the motor assembly in good shape. If the motor assembly is damaged or malfunctioning, it may cause the dryer to hum. The dryer may also have difficulty spinning.If the motor assembly has gone bad, it should be replaced. Unplug the dryer and consider work gloves to protect the hands. Remove the lint screen and housing, the lid, and the wire harness plug. Take off the front panel and unhook it from the hinges. Remove the pulley and belt to reach the drive motor. Take out the clamps and pull the motor assembly out. Place the new one in the same location and reassemble the dryer.Designed for dryers manufactured by Bosch, this motor assembly is sold individually. It is a genuine OEM replacement part that has been directly obtained from the manufacturer.

This is a replacement seal used to restore a watertight connection and help prevent leaks in compatible appliances. It provides a simple, low-cost way to replace a worn or damaged sealing element. What it does:

• Creates a secure, leak-resistant barrier at the mating surfaces where installed
• Helps stop visible leaks and drip symptoms associated with damaged seals
• Restores intended sealing performance when original gasket or seal is deteriorated

• Inspect mating surfaces for damage or debris and clean before installing the new seal
• Make sure the seal seats evenly and is fully inserted into its groove or recess
• Replace only with the correct OEM part number for a proper fit
• Disconnect power and water supply and follow appliance safety procedures before servicing

The Drum is an OEM part for Bosch dryers. Located inside the cabinet, this drum holds clothes during the drying cycle.

Causes of a bad drum can include rusting from wear over many cycles, dents from heavy loads impacting the surface, or cracked welds compromising integrity.

Symptoms of a bad drum include:

• Excessive drying times or wet clothes after cycles
• Noise or vibration due to an imbalance
• Loose or detached mounting points
• Chaffed or ruined clothing from rough surfaces

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

A replacement temperature limiter that helps protect heater circuits by opening the circuit if temperatures rise above safe levels. Use this thermostat to restore proper over-temperature protection on compatible appliances. What it does:

• Monitors local heater temperature and opens the circuit if the set limit is exceeded to reduce overheating risk
• Commonly used in appliance heater assemblies to protect components and wiring
• Can stop heating or cause an appliance to shut down when the limiter trips
• Help diagnose overheating symptoms such as unexpected shutdowns, no heat, or repeated thermal trips

• Disconnect power to the appliance before inspecting or replacing the limiter
• Match the replacement limiter to the original part number and terminal configuration before installation
• Handle the part carefully; avoid bending the sensor or applying solvents to electrical contacts
• If the limiter has tripped repeatedly, inspect associated heating and control components for underlying faults

The Power Cord is an OEM part for Bosch electric dryers. It provides power to heating elements and motor components, enabling all dryer functions. Working seamlessly behind wall panels and the control board, the cable supply facilitates safe and reliable drying performance cycle after cycle.

Symptoms of a bad power cord include:

• The dryer fails to power on or heat
• Flickering lights or control issues  
• Burning smells coming from internal areas
• Cable sheathing showing defects or damage

Causes for failure relate to insulation breaks, fraying, or cuts to wiring over time. Accidental impact, animal/insect damage, or general wear and tear may also degrade cable supply integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement seal restores a tight, leak-resistant connection between mating components inside your appliance. Replacing a worn seal helps stop drips at the joint and keeps the system operating reliably without nuisance leak faults.

• Forms a compressible barrier between parts to prevent leakage at a connection point
• Helps protect nearby components from moisture intrusion and corrosion
• Typical failure signs: moisture around a joint, puddling beneath the unit, or leak/overflow error messages
• Replace if the original is cracked, flattened, cut, brittle, or missing

• Disconnect power and shut off the water supply before servicing
• Access the connection, note the seal's orientation, and remove the old seal
• Clean mating surfaces; lightly moisten the new seal and seat it evenly without twisting or pinching
• Reassemble and test for leaks before reinstalling covers or panels

This access panel cover protects internal components and keeps wiring and mechanisms enclosed for safe, reliable operation. It restores the appliance's exterior finish and helps prevent debris from entering sensitive areas. What it does

• Shields internal parts and wiring from dust, moisture, and accidental contact
• Helps maintain correct airflow and component spacing behind the panel
• Stops rattles and vibration-related noise when properly seated
• Common symptom fix: cracked, loose, or missing cover causing exposed components or unusual noise

• One access panel cover

• Refer to your model's service manual for correct removal and reinstallation steps
• Disconnect power before starting any repair
• Use proper fasteners and align tabs to avoid damaging mounting clips or the cover
• If clips or screws are broken, replace them to ensure a secure fit

This metal paper capacitor replaces a failed film capacitor in household appliances to help stabilize voltage and support reliable electrical operation. It's used where the control or motor circuit needs clean, steady capacitance for proper function. What it does:

• Smooths and stabilizes voltage to reduce electrical noise and spikes
• Helps motors and control circuits start and run more reliably
• Can reduce intermittent operation, sputtering or weak motor performance
• Prevents control errors caused by unstable supply to electronic components

• Always disconnect the appliance from power before accessing electrical components
• Discharge the capacitor safely before handling to avoid shock
• Inspect mounting and wiring for heat or corrosion; replace connectors if damaged