Wtw5015lw Parts

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This bearing supports the washer drum and helps the tub spin smoothly, reducing noise and wear. Replace a worn bearing to restore stable rotation and prevent further damage to the tub and shaft. What it does:

• Provides a low-friction surface for the drum shaft to rotate on
• Keeps the drum aligned to prevent wobbling and uneven spinning
• Worn bearings can cause grinding, squealing, thumping, or excessive vibration
• A damaged bearing can lead to metal-on-metal contact and accelerate wear to other components

• One bearing

• Disconnect power and water supply before starting any repair
• Replacing the bearing typically requires drum disassembly; inspect seals and shaft for damage while access is available
• Use correct tools and replacement fasteners; do not force-fit parts

This wire harness is the main wiring assembly that connects controls and components, restoring electrical pathways for safe, reliable appliance operation. It replaces a damaged or frayed harness to help resolve intermittent or non-functioning electrical issues. What it does:

• Provides factory-style connections between control board and components for proper power and signal transmission
• Commonly replaces damaged, pinched, or burned wiring that can cause intermittent operation or loss of function
• Helps stop arcing, shorts, or erratic behavior caused by broken or loose connector leads
• Restores proper routing and secure connector fit to prevent future electrical faults

• One complete wire harness assembly

• Disconnect power (unplug or switch off breaker) before servicing to avoid shock or injury
• Compare new harness to the old one for connector types and routing; take photos before removal to aid reinstallation
• Route and secure harness away from heat sources, moving parts, and sharp edges to prevent wear
• Do not modify connectors or splice wires unless instructed by manufacturer

A replacement control panel that restores the appliance's front surface and provides a secure mounting area for buttons and switches. Replaces a damaged or worn panel to help maintain proper control operation and appearance. What it does:

• Provides the exterior mounting surface for control buttons, knobs, and switches
• Protects internal control components from spills, grease and accidental damage
• Restores a flush, secure fit to the appliance front where the panel was cracked, warped, or dented
• Can reduce issues caused by loose or misaligned controls

• One replacement control panel

• Disconnect power to the appliance before beginning any repairs
• Typically secures with screws and may require removing trim or the main console for access
• Handle carefully to avoid scratching the finish; use appropriate tools and fasteners

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This rubber pad cushions and protects appliance components from vibration and abrasion, reducing noise and wear. It's a small replacement part that restores proper contact and dampening where original pads have worn or fallen off. What it does

• Cushions panels or components to reduce vibration and rattling
• Prevents direct metal-to-metal contact that can cause scratching or wear
• Helps stabilize parts that have shifted due to a missing or damaged pad
• Commonly replaced when noisy operation or visible pad deterioration occurs

• One replacement pad

• Disconnect power before accessing interior panels or components
• Remove any retaining clips or panels that block the pad's location; pad typically presses into place
• Verify orientation and seating against the mating surface; replace any worn fasteners or retainers
• If adhesive was used on the original, use an OEM-recommended adhesive only.

This is an inner tub that is used in many models of washing machines. The appliance has two tubs and the inner one is the component that holds clothing through washing cycles. It has an agitator in the middle and perforated sides so that the water can leave the tub when it spins. It's inside the outer tub, which seals in the water and is bolted to the washer body. The tub can be damaged or wear out and will need to be replaced.When replacing the inner tub in a washing machine, make sure the appliance is powered off and the water supply is disconnected. The process requires tools including a nut drive, a flathead screwdriver, a socket and extension, a hammer, and a spanner wrench. Remove the original damaged inner tub from the machine before installing the new one in its place. Reinstall other components before turning back on the power and water.The inner tub is sold as a single component. It is a genuine OEM replacement part that is directly sourced from the manufacturer. This part is made to be used with washing machines manufactured by Crosley, Whirlpool, Maytag, and Kenmore.

This control panel is the user-facing console that houses the selector buttons and display, restoring control and feedback for your appliance so you can choose cycles and see status at a glance. What it does:

• Provides the pushbuttons/touch area and display interface used to select cycles and options
• Sends user commands to the appliance's control board so selected functions run correctly
• Restores visible status indicators and error readouts when the original panel is cracked or unresponsive
• Commonly replaced for unresponsive buttons, missing/blank display, or cosmetic damage to the front console

• One control panel assembly

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle the panel and display carefully to avoid cracking or scratching the lens
• Some installations require transferring switches, overlays, or brackets from the old panel

This cabinet is the outer housing that protects and supports the appliance's internal components, restoring the unit's structural integrity and appearance. Replaces a bent, dented, or rusted outer shell to reduce vibration and air leaks. What it does:

• Provides the main exterior enclosure and mounting surface for internal parts.
• Restores proper panel alignment to stop rubbing, rattling, or uneven gaps.
• Helps maintain correct airflow by sealing the appliance body.
• Protects wiring and controls from damage and debris.

• Disconnect power and any fuel supply before starting work.
• Installation may require removing panels and transferring brackets or trim; keep original fasteners if reinstalling.
• Cabinet replacements often require two people for safe positioning and alignment.
• Refer to the appliance's service manual or OEM instructions for specific disassembly and reassembly steps.

This is the main wire harness that routes power and signals between an appliance's control board and electrical components, restoring reliable electrical connections for proper operation. What it does

• Carries power and control signals between the control board, motor, switches and sensors.
• Replaces damaged or burned wiring that can cause intermittent operation or loss of functions.
• Commonly used when an appliance won't start, has unresponsive controls, or experiences random shutdowns.
• Ensures secure connector mating to reduce arcing and poor electrical contact.

• Disconnect power before any repair to avoid shock or damage.
• Compare connectors and wire colors to the old harness to match before installing.
• Route harness along original clips and channels; avoid sharp edges and pinch points.
• Inspect connectors and terminals for corrosion; replace any damaged terminals for a reliable repair.

This replacement wire harness routes power and control signals between the appliance's electrical components to restore reliable operation and proper connections. It replaces a damaged or worn harness to help stop intermittent power loss or component failures. What it does:

• Provides factory-style wiring connections for controls, motors, sensors and switches
• Restores interrupted circuits that can cause intermittent or no operation of affected components
• Replaces burnt, frayed or broken wiring that can cause arcing or poor contact
• Ensures correct routing and connector fit to prevent chafing and shorting

• Disconnect power to the appliance before starting any repair; verify power is off
• Compare the new harness to the old one for connector type and routing before installing
• Route harness to avoid sharp edges and moving parts; secure with existing clips or ties
• If connectors are damaged or corroded, replace them; do not use the appliance with exposed or repaired wiring

This outer washer tub is the main exterior tub that surrounds the inner wash basket, helping contain water and support the tub assembly for dependable washing performance. It restores the washer's water-sealing and structural support. What it does:

• Houses the inner tub and helps contain wash water to prevent leaks
• Provides structural support for the tub assembly and associated seals/bearings
• Works with the inner basket, seals, and suspension to maintain proper wash action
• Can address symptoms such as visible leaks from the tub area or excessive tub movement/noise

• One outer tub (single piece as shown)

• Refer to your model's service manual for step-by-step removal and reassembly and follow OEM torque and seal replacement guidance
• Replace any worn seals, gaskets, or mounting hardware during installation to ensure a proper water-tight fit
• Disconnect power and water supply before beginning service to avoid shock or flooding
• Inspect those components and replace as needed