Wtw6100sw1 Parts

The Dispenser Tray is an OEM part for Whirlpool top-loading washing machines. Located inside the detergent drawer, this durable molded tray is designed to hold liquid detergent packs safely in place during cycles. Its size and dimensions facilitate convenient single-dose placement.

Causes for replacement may include cracks, warping, or discoloration due to mineral buildup affecting the tray structure over time.

Symptoms of a faulty tray involve:  

• Difficulty loading or securing detergent packs properly   
• Leaks or spills of detergent inside the drawer compartment
• Off-center or displaced detergent dosing during the wash

This OEM Whirlpool replacement is compatible with select Whirlpool, Maytag, and other major brand front-loaders.

The Spanner Nut is an OEM part for Whirlpool washing machines. As a critical component, the spanner nut attaches and secures the rear bearing housing to the tub assembly. It maintains proper alignment of internal components and prevents misalignment that can lead to failure. 

Causes of a bad spanner nut can include wear and tear over time, stripping of threads due to over-tightening, or damage from impact or corrosion.  

Symptoms of a bad spanner nut include:

• Vibration or excessive noise during spin cycles
• Rubbing or grinding noises from internal components  
• Reduced spin efficiency and unbalanced loads
• Premature failures of other components like belts or bearings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore washing machine models.

The Dispenser is an OEM part for Whirlpool washing machines. This part automatically dispenses the right amount of detergent at the optimum time in the cycle.

Causes of a faulty dispenser can include clogged or damaged dispenser tubes from mineral buildup, or a worn dispenser drawer that no longer opens fully.

Symptoms of a bad dispenser include:

• Residual detergent left in the drawer after cycles
• Stained or dirty dispenser area from leaks/overflows
• Incomplete or insufficient cleaning from improper detergent dosing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Drain Hose is an OEM part for Whirlpool washing machines. It is a flexible tube that diverts water from the washer tub during drain cycles, guiding it out of the appliance and into a nearby drain source such as a sink. 

Causes of a bad drain hose can include cracks or abrasions developing over time due to repeated bending and flexing during drain cycles. Mineral or hard water buildup inside the hose can also lead to clogs. Other potential causes are physical damage from rodents, pets, or accidental punctures.

Symptoms of a bad drain hose include:

• Incomplete draining or water remaining in the washer tub after cycles  
• Leaks or drips forming around the drain hose connection point
• Puddles or water pooling under or around the washing machine
• Slow drainage during spin cycles

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washer models.

This factory screw fastens appliance components securely. Replacing a missing, stripped, or rusty screw helps stop rattles, keep panels and brackets aligned, and restore a solid, as-designed fit.

• Secures panels, brackets, and trim to the appliance cabinet or frame
• Helps maintain alignment and reduce vibration or rattling noises
• Replaces damaged, corroded, or missing hardware
• Can resolve loose or shifting components

• Disconnect power and shut off gas/water to the appliance before service.
• Use the correct driver; start threads by hand to avoid cross-threading and do not overtighten.
• Install in the original location and match the OEM fastener type specified in your model's parts diagram.

The Sound Shield is an OEM replacement part for Whirlpool washers. It is a sheet metal panel installed behind the tub that helps reduce noise and vibration during spin cycles. With absorptive insulation, the sound shield dampens noise produced internally. 

Symptoms of a damaged sound shield include:

• Excessively loud operation, especially during high-speed spins
• Rattles, clanks, or resonant noises from inside the washer  
• Potentially weakened structure allowing tub movement
• Causes of a damaged sound shield can include tears or dents sustained over many high-speed spin cycles. Constant vibration may cause stress cracks or loose rivets.

 It is also compatible with some  Whirlpool, Maytag, Amana, and Kenmore brands.

This stator is the stationary motor assembly that creates the magnetic field to drive the washer motor. It restores proper motor function so the washer can agitate and spin reliably when the rotor and drive are working. What it does:

• Generates the magnetic field needed for the washer motor to turn the rotor and tub
• Replaces a worn or damaged stator that can cause humming, no-spin, no-agitate, or intermittent motor operation
• Works with the rotor and motor assembly to deliver consistent torque during wash and spin cycles
• Designed to fit the original motor housing and align with factory mounting points

• One stator assembly

• High-level replacement only; motor disassembly is required—refer to manufacturer instructions or a service manual
• Disconnect power before servicing to avoid shock or injury
• Inspect rotor, bearings, and wiring while motor is accessible; replace any damaged components

The Bezel is an OEM part compatible with Whirlpool washing machines. This trim piece secures the control console interface within the cabinet opening. Proper mounting provides seamless integration for an aesthetically pleasing appearance.  

Causes of a bad bezel stem from environmental damages over time like cracks or discoloration from cleaning chemicals near the buttons. Repeated impact nicks and dents compromise structural integrity as well.

Symptoms of a bad bezel include:

• Loose hanging appearance no longer firmly fitted  
• Gaps forming entry points for lint and moisture damage
• Detached sections at risk of falling off entirely
• Visual deterioration marring overall style

This Whirlpool replacement bezel restores the finish and protects internal components. It is compatible with brands including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This screw is a genuine replacement fastener used to secure appliance panels and components for a reliable fit. It restores proper fastening where original screws are missing, stripped, or damaged. What it does:

• Fastens panels, trim, brackets or small components to keep parts aligned and secure
• Replaces missing or damaged screws that can cause loose panels or rattling
• Restores proper clamping force to prevent movement and wear on adjacent parts
• Matches OEM function and fit when the correct part number is used

• Disconnect power and water before servicing the appliance
• Use the correct driver to engage the head cleanly and avoid stripping
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This 3-coil dispenser harness connects the dispenser controls to the refrigerator's door components, restoring reliable electrical communication for ice/water dispenser operation. Designed as a direct-fit replacement to return dispenser functions without door modification. What it does:

• Routes power and signal between the dispenser controls and door components so the dispenser operates correctly
• Replaces damaged, frayed or intermittent wiring that can cause non-working or unreliable dispenser behavior
• Helps resolve symptoms such as unresponsive dispenser buttons, intermittent dispensing, or no dispenser activity
• Matches OEM routing and connector configuration for a proper fit and secure electrical connections

• One 3-coil dispenser harness (single assembly as shown)

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Remove dispenser door trim/panel as needed to access and replace the harness per manufacturer instructions
• Match connector shapes and routing clips; secure harness to prevent pinching when reassembling the door

Color: White

This cabinet is the outer housing that protects and supports the appliance's internal components, restoring the unit's structural integrity and appearance. Replaces a bent, dented, or rusted outer shell to reduce vibration and air leaks. What it does:

• Provides the main exterior enclosure and mounting surface for internal parts.
• Restores proper panel alignment to stop rubbing, rattling, or uneven gaps.
• Helps maintain correct airflow by sealing the appliance body.
• Protects wiring and controls from damage and debris.

• Disconnect power and any fuel supply before starting work.
• Installation may require removing panels and transferring brackets or trim; keep original fasteners if reinstalling.
• Cabinet replacements often require two people for safe positioning and alignment.
• Refer to the appliance's service manual or OEM instructions for specific disassembly and reassembly steps.