Wwf337aag Parts

The lower basket holds and organizes items in the bottom section of the freezer. Replace a bent, broken, or missing basket to restore tidy storage and easier access to food in the lower compartment.

• Provides stable, contained storage in the lower freezer area
• Replaces a damaged, bent, rusted, or missing lower basket
• Helps keep food visible and accessible, reducing clutter
• If the basket won't sit level or shows broken wires/coating, replacement is recommended

• Unplug the appliance before servicing
• Empty the compartment and lift out the old basket
• Set the new basket onto the lower supports and ensure it sits level and secure
• Reload items evenly to prevent tipping

This full-width upper storage basket sits at the top of the freezer compartment. It hangs on the upper rails to keep smaller items organized and easy to reach, restoring usable space when the original basket is damaged or missing.

• Provides full-width storage at the top of the freezer for frequently used items
• Hangs from the upper rails for quick access and improved organization
• Replace if the original basket is bent, broken, rusted, or the coating is flaking
• Helps prevent small packages from falling to the bottom of the compartment

• Always disconnect power before servicing
• Open the door/lid, lift out the old basket, and set the new basket onto the upper rails
• Ensure both hooks are fully seated on the rails and the door/lid closes without interference
• No tools typically required

The Temperature Control Thermostat is an OEM part for Frigidaire freezers. It is an electro-mechanical component that precisely regulates internal temperatures according to user settings on the digital display. The thermostat monitors and reacts to changing conditions by signaling the cooling system to engage or deactivate.

Causes of a bad thermostat can include failures of temperature sensing components over several heating/cooling cycles. Excess moisture exposure or damage from foreign material inside the unit may also compromise function. 

Symptoms of a bad thermostat include:  

• Inability to select temperature settings or maintain consistent cooling
• Food not chilling as expected 
• Refrigerator Run light staying on for extended periods
• Unusual odors coming from inside the refrigerator compartment

This OEM Frigidaire replacement thermostat is compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 
 

This trivet is the cast metal support that sits over a cooktop burner to hold cookware steady and protect the burner assembly. It restores a level cooking surface and helps maintain safe, even contact between pots and the burner. What it does:

• Provides a stable platform for pots and pans on a cooktop burner
• Keeps cookware off the burner head to prevent direct damage
• Helps maintain correct clearance so flames and heat are directed properly
• Replaces cracked, warped or missing trivets that cause wobbling or uneven cooking

• Allow the cooktop to cool completely before handling the trivet
• No tools usually required — set the trivet into place over the burner until it seats securely
• Inspect mating surfaces for debris or damage before reinstalling
• If the trivet is warped or doesn't sit level after installation, do not use the burner and replace with a matched part

A small metal clamp that secures the refrigerator's capillary (temperature sensing) tube to the cold control so the thermostat reads temperatures accurately. Replaces worn or missing clamps to keep the sensing tube stable and prevent movement-related issues. What it does:

• Holds the capillary/sensing tube firmly against the cold control or cabinet
• Helps maintain accurate thermostat sensing by preventing tube movement
• Reduces vibration or rattling from a loose sensing tube
• Stops intermittent temperature swings caused by a displaced capillary tube

• Disconnect power before servicing the appliance.
• Handle the capillary tube gently; avoid kinks or sharp bends.
• Install clamp over the tube and secure to the control or bracket using the factory hole or fastener; do not overtighten.

This mounting bracket secures internal components and panels to restore proper alignment and reduce vibration. It provides a direct replacement for worn or damaged support hardware so assemblies stay firmly in place. What it does:

• Secures appliance panels or internal components to the cabinet or frame
• Keeps parts aligned to prevent rattling, vibration, or movement during operation
• Restores proper fit where a bent, broken, or missing bracket causes loose assemblies
• Helps maintain safe, stable operation by holding parts in their designed position

• One mounting bracket

• Designed to replace the factory bracket in the same mounting location; verify fit before installation
• Use appropriate fasteners and torque to avoid striping or damage to mounting points
• Disconnect power and empty unit if needed before accessing internal areas

This replacement screw fastens appliance panels and components to restore a secure fit and reduce vibration or rattling. Use when original hardware is missing, loose, or stripped to keep parts aligned and operating quietly. What it does:

• Secures panels, brackets, and trim to prevent movement and rattling.
• Replaces missing or damaged hardware that can cause loose or misaligned parts.
• Helps maintain proper component alignment for reliable operation.
• Small but essential fastener for safe, stable assembly.

• Disconnect power before servicing any electrical appliance.
• Use the correct screwdriver or bit to avoid stripping the head.
• Tighten until snug—do not overtighten, which can strip threads or crack panels.
• Keep removed hardware organized to ensure correct reinstallation.

This replacement cover is an access panel trim piece that protects internal components and gives the appliance a finished appearance. It restores a secure, clean-looking exterior where the original cover is cracked or missing. What it does

• Covers and protects control or component openings from dust, debris, and accidental contact
• Keeps wiring and fasteners concealed for a neater appearance
• Prevents rattling or vibration caused by a damaged or loose trim piece
• Commonly replaced when the cover is cracked, broken, warped, or missing

• One cover

• Disconnect power to the appliance before starting any work
• Remove adjacent trim or fasteners as needed to access mounting points; retain hardware for reassembly
• Align tabs or screw holes and secure without over-tightening to avoid cracking the plastic

This drain tube insulation cushions and thermally protects the refrigerator's defrost drain tube to help prevent condensation and ice buildup. It keeps the drain line insulated so water flows freely to the drip pan and reduces drip/ice-related issues. What it does:

• Wraps around the defrost drain tube to limit heat transfer and condensation.
• Helps prevent drain freeze-ups that can cause water pooling or slow drainage.
• Reduces the chance of water dripping inside the cabinet or onto the floor.
• Supports reliable defrost water routing to the drain pan.

• Always unplug the appliance or disconnect power before servicing.
• Access may require removing the back or inside panel; keep track of fasteners.
• Slide the insulation over the drain tube so it fully covers the exposed section; ensure it sits flat without kinks.
• If corrosion or heavy buildup is present, clean the drain tube before installing new insulation.

This inner lid panel replaces the damaged or worn interior surface of the washer's upper lid, restoring a finished appearance and helping the lid secure properly. Designed to match the OEM lid assembly fit. What it does

• Provides the finished inner surface of the washer lid so the lid closes and seals as intended
• Replaces cracked, broken, or warped inner lid material that can catch clothes or interfere with lid operation
• Stops interior rattles or movement caused by a loose or deteriorated inner panel
• Helps maintain proper alignment between the lid and latch for reliable closing

• One inner lid panel (upper washer lid panel) as pictured

• Disconnect power to the appliance before beginning any repair
• Remove screws or retaining clips from the outer lid to separate the inner panel; keep fasteners for reinstallation
• Handle edges carefully to avoid damaging trim or the new panel; common hand tools required