Zdp36n4r Parts

This formed gas tube routes fuel to the front surface-burner section on select gas ranges and cooktops. Replacing a damaged or clogged tube restores proper gas flow and reliable ignition to the front burners.

• Distributes gas from the supply/manifold to the front row of surface burners
• Helps address front burners not lighting, weak/uneven flame, or gas odor when the original tube is damaged or obstructed
• Maintains factory routing and clearances under the cooktop
• Direct-fit shape to match the original path and connections

• Shut off gas supply and power; allow the appliance to cool before servicing.
• Access tubing under the cooktop/rangetop; note routing and orientation before removal.
• Support fittings with two wrenches; avoid kinking or over-bending the new tube.
• After installation, perform a thorough leak check with an approved leak-detection solution before restoring gas and power.

This high-voltage transformer steps line voltage up to power the magnetron, producing microwave energy. Replacing a failed transformer can restore heating when the oven runs but doesn't heat or hums without cooking.

• Supplies the high voltage the magnetron needs to generate microwave energy
• Failure may present as the microwave running but not heating
• May cause a loud hum or buzz with no heat
• Can blow an internal fuse or trip a breaker immediately after pressing Start

• Disconnect power before service; the high-voltage capacitor can retain a dangerous charge even when unplugged
• Support the heavy transformer during removal/installation and reuse original mounting hardware and wire positions
• After installation, verify secure connections in the high-voltage circuit (capacitor and diode) before testing

A replacement D port trim ring that restores the finished opening and secures a vent/port on the appliance. Replaces a cracked, broken or missing trim piece to stop drafts and eliminate rattling. What it does:

• Provides a finished, stable edge around a D-shaped port or vent opening
• Helps hold a hose or duct in position and reduces movement
• Reduces air leaks and vibration-related noise when damaged or loose
• Commonly replaced when the trim is cracked, warped or missing

• Disconnect power and follow the appliance manufacturer's safety instructions before starting
• Small screws or clips may secure the ring; keep hardware organized for reassembly
• Expect simple, moderate-level access; removing a panel may be required
• Wear gloves to protect against sharp sheet-metal edges

This spark switch/simmer burner is the electrical switch that sends spark to a gas cooktop burner, restoring reliable ignition and simmer control for compatible ranges. Replaces a worn or unresponsive burner spark switch. What it does:

• Routes high-voltage spark to the burner so the gas will ignite
• Enables proper simmer flame control and consistent ignition
• Commonly replaced when a burner won't spark, sparks intermittently, or won't light
• Works with the range's control knob and ignition system to start the flame

• One spark switch/simmer burner

• Disconnect power to the appliance and turn off the gas supply before beginning work
• Access typically requires removing the cooktop or control panel; follow your model's service instructions
• Handle electrical connections carefully and replace only with the correct part number

This LP/NAT conversion kit contains the orifice spuds and instructions needed to convert a compatible gas range or oven between liquid propane (LP) and natural gas so burners operate with the correct fuel flow and combustion. What it does:

• Replaces factory orifice spuds to match the appliance to LP or natural gas
• Restores proper burner flame size and performance after conversion
• Helps prevent incomplete combustion caused by incorrect orifice sizing
• Use when appliance was shipped for a different fuel type or after regulator changes

• Turn off gas supply and electricity before servicing; leak-test all connections after installation
• Follow the appliance's service manual and conversion instructions exactly
• Use the correct orifice(s) for your fuel type
• Retain removed parts and documentation for warranty and service records

This replacement 27" oven timer controls the oven clock, timer and clean functions so your range can accurately time cooking cycles and complete self-clean cycles. Restores timed baking, countdown and oven clean control. What it does:

• Replaces the oven's timer/clock control used for setting cook time and monitoring countdowns
• Manages self-clean cycle initiation and timing for compatible 27" ovens
• Restores visible clock and timer display when original control is blank or unresponsive
• Helps address symptoms like oven not starting timed cycles, timer not counting down, or clean cycle failing to initiate

• Disconnect power to the range at the breaker before beginning service.
• Handle the control assembly carefully to avoid damage to the display and connectors.
• Use basic hand tools.

Note: Quantity of one bolt. Order quantity needed.

This grate support is the cooktop bracket that holds and stabilizes a single burner grate so cookware sits level while you cook. It restores proper support and reduces grate wobble for safer, more even cooking. What it does:

• Supports and secures a cooktop burner grate in its correct position
• Prevents grate rocking or shifting while placing or moving cookware
• Helps maintain even heat contact by keeping grates properly aligned
• Commonly used when a support is cracked, worn, or broken

• Inspect surrounding cooktop area for damage before installing; replace any additional worn supports
• Disconnect power to the appliance (or shut off gas and ensure burners are cool) before working on the cooktop
• Install with original fasteners or OEM replacements; tighten securely but avoid overtightening

This push button replaces a damaged or missing control-panel button to restore tactile input for your appliance. It provides a direct mechanical interface so the control board registers user commands reliably. What it does:

• Acts as the physical button you press to select functions or settings on the control panel
• Restores proper tactile feedback when the original button is cracked, stuck, or worn
• Helps resolve issues where the control won't respond to a specific button press caused by a damaged button
• Interfaces with the switch assembly or keypad area to transmit user input to the control board

• One push button

• Disconnect power to the appliance before beginning any repair
• Access may require removing the control console or trim panel; use appropriate tools to avoid damaging surrounding parts
• Remove the old button by gently pulling or prying it from the bezel; seat the replacement fully until it snaps into place
• If the switch or underlying components are damaged, inspect and replace those parts as needed; do not attempt electrical repairs without proper knowledge