Zgp366nrss Parts

This relay board assembly is the control relay module that routes power to a refrigerator's major components. Replacing a faulty relay board restores reliable starting and power distribution for cooling and related functions. What it does

• Directs electrical power to the compressor and other major components via relays
• Replaces a failed relay board that can cause a refrigerator not to start or run intermittently
• Can stop symptoms like repeated relay clicking, no cooling, or a compressor that won't engage
• Works as the electrical switching interface between the main control and high-current components

• One relay board assembly

• Disconnect power before servicing to avoid electrical shock
• Handle the board by the edges and avoid touching contacts or components
• Verify connectors are fully seated and routed away from moving parts before restoring power

Replacement knob assembly for the grill/broil thermostat — restores reliable temperature control and a secure grip. Easy to swap, it gets your grill control working smoothly so you can set heat levels with confidence. What it does:

• Restores positive engagement for the grill/broil thermostat when the original knob is cracked, missing, loose, or spins freely
• Allows accurate selection of grill temperature settings and repeatable control feel
• Direct-fit control knob designed to match the OEM spline and dial orientation for proper operation
• Durable construction made for regular oven use

• Disconnect power or unplug the appliance before beginning any repair
• Remove the old knob by pulling it straight off the control shaft; align the new knob with the control spline and push until fully seated
• No special tools typically required; if the knob is stuck, use gentle leverage and avoid metal prying that could damage the shaft
• Allow the appliance to cool before working near heating elements or hot surfaces

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This 27" oven door gasket seals the gap between the door and oven body to help maintain proper cavity temperature and reduce heat loss during cooking. It restores a tighter door seal for more consistent baking and roasting. What it does:

• Replaces worn or torn door seal that lets oven heat escape
• Helps the oven reach and maintain set temperatures more reliably
• Reduces hot spots and uneven cooking caused by a failing seal
• Minimizes heat transfer to surrounding cabinetry and reduces energy loss

• One door gasket (27")

• Disconnect power and allow the appliance to cool completely before starting
• Remove the old gasket and any adhesive or fasteners before installing the new gasket
• Press the new gasket into the door channel evenly, ensuring proper orientation and a continuous seal

The Reed Switch Pcb is an OEM part for GE gas ranges. This component plays a crucial role in the burner control system by detecting the on/off position of the control knobs. 

Causes of a bad reed switch pcb include circuitry failure, component degradation over time, damage from falls or impacts, or issues with the wiring connections. 

Symptoms of a bad reed switch pcb include:

• Burners not igniting when turned on  
• Ignition sparks but burners fail to light
• Unresponsive or intermittent control knob functionality
• Inability to turn burners off

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This oven rack slide assembly restores smooth support and movement for removable oven racks, letting trays glide in and out safely for cooking and cleanup. Designed to replace a worn or damaged slide assembly. What it does:

• Supports oven racks and guides them smoothly in and out of the oven cavity
• Prevents racks from tipping or falling when pulling food out
• Reduces sticking, dragging, or noisy rack movement
• Helps maintain proper rack alignment for even cooking

• Disconnect power to the appliance before beginning any repair; allow the oven to cool completely.
• Remove oven racks and access the damaged slide per the manufacturer's instructions; installation may require basic hand tools.
• Handle edges carefully and verify correct alignment and secure mounting before returning the oven to service.

A replacement front bezel assembly that restores the oven's front trim and helps keep the door area properly aligned and sealed. Replaces a damaged or worn front trim to renew appearance and fit. What it does

• Provides the front-facing trim around the oven opening and door area.
• Secures and aligns the oven door and related trim pieces for proper closure.
• Replaces cracked, warped or cosmetically damaged bezel pieces.
• Helps stop drafts and visible gaps caused by a broken or bent front trim.

• One oven bezel assembly (front trim), as shown.

• Disconnect power to the range before starting any service to avoid shock or injury.
• Installation typically requires removing the oven door or outer door components and unscrewing retaining fasteners; keep track of screws and clips.
• Handle with care to avoid scratching the finish; verify orientation before final fastening.

This right-side refrigerator door hinge replaces a worn or damaged hinge to restore correct door alignment and smooth opening. It's a direct-fit hinge used where the door is sagging, binding, or not sealing properly. What it does:

• Supports the right-hand door and provides a pivot point for opening and closing
• Restores proper door alignment to improve sealing and temperature consistency
• Reduces binding, scraping or noisy operation caused by a bent or worn hinge
• Helps prevent accelerated wear to the door and cabinet mounting surfaces

• Disconnect power to the appliance and remove stored items from the door before starting.
• Support the door while removing and installing the hinge to prevent damage or injury.
• Use the correct hand tools and tighten fasteners to the manufacturer's torque recommendations.
• If alignment issues persist after installation, check hinge placement and door stops per service instructions.

This left-side refrigerator door hinge secures and guides the door on compatible GE refrigerators, helping the door open and close smoothly and maintain proper alignment. Replacement hinge restores stable door movement and sealing. What it does:

• Provides a reinforced pivot point so the door swings freely without sagging
• Keeps the door aligned to preserve gasket contact and cooling performance
• Replaces worn or bent hinges that cause uneven gaps or noisy operation
• Works as part of the door mounting system to support normal door weight

• One left-side door hinge

• Disconnect power to the appliance and remove stored items from the door before starting
• Support the door while removing hinge fasteners to prevent dropping or damage
• Retain original screws and hardware unless the replacement explicitly includes them

This LED power supply powers and regulates the refrigerator's LED lighting, restoring reliable interior illumination. It replaces a failed driver to stop flicker and prevent LEDs from remaining dark or dim. What it does:

• Converts appliance line voltage to the proper low-voltage DC for LED strips
• Keeps LED lights stable and prevents flickering or intermittent operation
• Restores full brightness when a failed driver causes dim or no interior lighting
• Protects LEDs from irregular voltage that can shorten lamp life

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the board and connectors carefully to avoid static or physical damage.
• Basic hand tools and access to the light housing/panel are usually required.

This LED board is the refrigerator interior light assembly that restores bright, even illumination inside the fresh-food compartment for easier visibility and safer food access. What it does

• Powers and distributes LED light to illuminate the refrigerator interior
• Replaces a failed or dimming light board to stop flicker or complete loss of interior lighting
• Ensures even light coverage across the compartment for better visibility
• Works with the refrigerator's existing light housing and connectors to restore normal operation

• One LED board

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching LED components or circuitry
• Remove shelves and trim as needed to access the light housing; keep track of screws and retainers
• Reconnect all wiring and verify proper operation before reassembling the compartment

The Control Display Module is an OEM part for GE gas ranges. It is the central component responsible for controlling and monitoring all functions and settings of the range through an LCD interface. 

Symptoms of a bad control display module include: 

• Blank or unresponsive control display  
• Inability to set or change oven temperatures
• Fault codes or error messages appearing 
• Control keys sticking or not responding properly

Causes of a bad control display module can include circuit board failure, liquid damage, overheating issues, or normal component degradation over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This clip retainer secures the oven door glass to the door frame to keep the glass stable during use and prevent rattling or separation. Simple replacement restores proper glass alignment and reduces vibration noise. What it does:

• Holds the inner door glass in position inside the oven door assembly.
• Prevents the glass from shifting, rattling, or contacting other door parts.
• Helps maintain a safe, stable door assembly after a cracked or missing clip.
• Commonly replaced when the glass feels loose or the door vibrates during operation.

• One clip retainer for door glass.

• Disconnect power to the appliance before starting and allow the door to cool completely.
• Remove the oven door per the manufacturer instructions and handle glass with care — support both pieces of glass when separating.
• Use basic hand tools; keep track of screws and any spacers removed.