Zgu85nsmss Parts

Size: 8 - 32 inch.

This carrier orifice assembly routes and meters gas to a surface burner so the cooktop lights and maintains a steady flame. It restores proper gas delivery for reliable burner performance and safer operation. What it does:

• Holds the orifice that meters gas flow to the burner for correct flame size and stability
• Ensures consistent ignition and even heating across the burner
• Can address weak, uneven, or inconsistent flames and burners that struggle to light
• Works as the mounting interface between the gas valve/orifice and the burner head

• Shut off gas supply and electrical power before servicing the appliance
• Basic hand tools are typically required; avoid forcing fittings or overtightening

Natural gas. Main burner.

12K

This burner base restores consistent flame and reliable ignition on your gas cooktop or range. It routes gas from the orifice through the burner ports and supports the cap and igniter for even, dependable heat.

• Directs gas from the orifice through burner ports for a stable, even flame
• Provides the seating surface for the burner cap and alignment for the igniter electrode
• Helps ensure quick, reliable lighting when clean and intact
• A worn, cracked, or clogged base can cause weak/uneven flames, delayed ignition, or burners that won't light

• Shut off gas supply and power; allow the surface to cool completely
• Remove grates and burner caps; take out mounting screws and lift off the old base
• Protect the igniter electrode; transfer any reusable screws or gasket as needed; set the new base flat over the orifice holder
• Reassemble, restore gas/power, and test for proper ignition and flame; check connections with a leak-detection solution

This is the screw that secures the burner valve to the appliance, keeping the valve and associated controls fastened for reliable operation. Replaces a worn or missing mounting fastener to restore proper valve alignment and support. What it does:

• Secures the burner valve assembly to the appliance frame or manifold
• Keeps valve position stable to help maintain reliable burner operation
• Helps prevent movement that can cause loose connections or intermittent function
• Used when original screw is stripped, missing, or corroded

• One burner valve mounting screw

• Turn off power and gas supply to the appliance before starting any repair
• Use the correct size driver and avoid over-tightening to prevent stripping the screw or damaging the valve
• Confirm valve and surrounding components are properly aligned before final tightening

This replacement screw secures appliance components and helps keep panels, brackets, and controls firmly attached for reliable operation. It's a simple, direct fix when a mounting screw is missing, loose, or stripped. What it does:

• Fastens panels, trim, brackets or electrical components to reduce movement and rattling.
• Restores proper alignment of parts that shift when a screw is missing or worn.
• Helps maintain electrical and mechanical connections by keeping components seated.
• Common symptom: loose or vibrating panels, trim gaps, or visibly missing hardware.

• Disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Thread gently and avoid overtightening to prevent stripping the mating threads or cracking surrounding parts.
• Keep any removed hardware organized to ensure placement of all required fasteners during reassembly.

This regulator controls gas pressure to the range/oven so burners and the oven heat consistently and safely. Replaces a failed regulator to restore proper flame behavior and reliable cooking performance. What it does:

• Regulates incoming gas pressure to the appliance's burner system
• Helps maintain steady, even flame height for consistent cooking
• Resolves symptoms like weak or uneven flames, burners that won't light, or poor oven heat
• Prevents over-pressurization that can cause unstable burner operation

• One regulator

• Turn off the gas supply and electrical power before beginning work
• Install using proper fittings and thread sealant rated for gas; tighten to OEM torque specs
• After installation, test all gas connections for leaks (do not use an open flame)

This surface ring burner replaces a damaged or worn cooktop burner ring to restore proper flame distribution on gas ranges. It fits into the burner assembly and provides a stable base for the burner cap and grate. What it does:

• Replaces a cracked, warped, or corroded burner ring that interferes with even heating
• Helps correct uneven or wandering flames caused by a damaged ring
• Restores proper alignment for the burner cap and grate for reliable cooking
• Can reduce sputtering or interrupted ignition when the ring is the source of the problem

• Always shut off the gas supply and power to the appliance before starting work
• Remove grates and burner caps to access the burner ring; confirm part orientation before removal
• Hand-tighten fittings only; do not modify the part or appliance gas fittings
• If you smell gas, stop work immediately, ventilate the area.

Qty: 1 (order quantity needed)

A replacement thermostat knob assembly that restores reliable temperature selection and a clear indicator for your range or oven control. Replaces a cracked, stripped, or missing knob so you can set heat levels accurately. What it does

• Replaces a damaged or worn thermostat/control knob so the control shaft can be turned and settings selected
• Provides a visible pointer for temperature or function indication
• Stops slipping or spinning when the knob shaft is stripped or the original knob is broken
• Restores user control and improves safety by allowing secure, tactile adjustments

• One thermostat knob assembly

• Disconnect power to the appliance before beginning any service
• Knob typically pulls straight off the control shaft; align the internal spline and push fully onto the shaft until seated
• Do not force or hammer the part; check shaft and shaft adapter for damage before installing
• If the control shaft is damaged, replacement of the control may be required

This spark module controls the oven/range ignition sequence to generate sparks at the burner or bake igniter so gas units light reliably. Replaces a worn or failed ignition control to restore consistent spark firing. What it does:

• Sends electrical pulses to the burner igniters to produce sparks during the cooktop/oven ignition cycle
• Helps resolve intermittent or no-spark symptoms when burners or oven won't light
• Resets ignition timing and pulse delivery when a faulty module causes misfiring
• Works with the appliance's safety controls to allow normal ignition sequences

• One spark module

• Disconnect power and gas supply before attempting replacement; follow appliance-specific service manual
• Verify connector orientation and secure all wire harnesses; loose connections can prevent ignition
• Handle module and connectors gently to avoid damage from static or impact

A replacement spark electrode that creates the ignition spark for a gas cooktop burner so burners light reliably. Fits common GE ranges and helps restore normal ignition when a burner won't light. What it does:

• Produces the high-voltage spark that ignites the gas at a surface burner
• Stops ignition failure symptoms like no spark, inconsistent lighting, or constant clicking
• Works with the burner cap and valve to enable normal burner operation
• Replaces a cracked, broken, or corroded electrode that prevents ignition

• One igniter (spark electrode)

• Disconnect power to the appliance before starting any repair; shut off gas supply if applicable
• Handle the ceramic tip carefully to avoid chipping; do not touch the electrode tip with bare hands
• Verify correct orientation and secure mounting; ensure proper clearance from the burner cap

The Burner Head Assembly is an OEM replacement part for GE gas cooktops. Specifically designed for a 12,000 BTU output, this burner assembly is responsible for delivering efficient and powerful heat to your cookware, providing precise heat distribution and flame control.

Symptoms of a faulty head burner assembly include:

• Uneven heating or hot spots on cookware
• Weak or inconsistent flames
• Difficulty in adjusting flame intensity

A bad head burner assembly can occur due to wear and tear over time, clogs or blockages in the burner ports, or damage from spills or heavy pots. If you notice issues such as uneven heating, weak flames, or difficulty in adjusting the flame intensity, it may be time to replace the old or damaged head burner assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Natural gas. LG 1.68mm

This burner cap sits on the gas burner head to shape the flame and shield the burner from spills. Replacing a worn or missing cap restores reliable ignition and even heat for consistent cooking results.

• Distributes the burner flame evenly for proper heating
• Protects the burner head from spills and debris
• Helps ensure quick, reliable ignition when properly seated
• Replace if chipped, warped, rusted, or missing; symptoms can include hard-to-light burners or yellow/uneven flames

• Turn off gas and power; allow the cooktop to cool completely
• Lift off the old cap and clean the burner head surface
• Align and seat the new cap flush and level; test burner ignition and flame pattern