Zgu85nsmss Parts

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This dual gas valve controls gas flow to two oven/range burners from a center-mounted connection, restoring safe fuel delivery for heating cycles. Designed to replace a failed valve assembly and stop intermittent heating or no-heat symptoms. What it does

• Opens and closes gas flow to the oven/range burner circuits when signaled by the thermostat or control.
• Replaces a worn or stuck valve that can cause no heat, uneven heating, or continuous pilot flow.
• Helps stop clicking or cycling caused by faulty valve operation.
• Works with the appliance's safety interlocks and thermocouples to regulate oven/burner ignition.

• One dual center gas valve assembly as specified by the manufacturer.

• Turn off gas supply and disconnect electrical power before starting service.
• After installation, check all gas connections with a leak detector solution and verify proper operation per manufacturer instructions.
• Do not install a visibly damaged valve; replace if packaging or components are compromised.

The Orifice Spud Natural Gas is an OEM part for GE gas cooktops. It is responsible for regulating gas flow to each burner of the cooktop.

The orifice spud contains precision machined openings to control the amount of natural gas delivered according to each burner's requirements. Properly sized orifices are vital for efficient combustion and optimal heat levels during cooking. 

Causes of a faulty orifice spud can include wear and tear over time, corrosion buildup affecting gas flow, or damage to the spud's openings.

Symptoms of a problematic orifice spud include:

• Burners not igniting consistently 
• Unstable flame patterns with inconsistent heating
• Abnormal burner noises
• Inability to adjust burner flames 

Replacing with this genuine OEM GE part restores optimized gas flow control to the cooktop burners. Compatible models include GE, Hotpoint, KitchenAid, and select Kenmore gas cooktop ranges.
 

This LP conversion kit converts a compatible gas range or cooktop to operate on liquid propane (LP), restoring correct burner performance and safe fuel delivery after a fuel-type change. Designed to match OEM conversion requirements. What it does

• Replaces factory parts needed to convert appliance from natural gas to LP so burners run correctly on propane.
• Restores proper burner flame size and heat output after conversion.
• Helps resolve ignition or low-flame issues caused by incorrect orifice/regulator settings for LP.
• Ensures correct fuel metering when used with compatible OEM installation instructions.

• One LP conversion kit (contains the parts required for propane conversion per OEM kit)

• Follow the OEM conversion instructions exactly; conversion may require changing orifices and adjusting the regulator.
• Turn off the gas supply and electricity before beginning work; perform a gas leak test after installation.

This burner box wiring harness connects the cooktop/oven burner components to the appliance's control systems, restoring reliable ignition and power routing for the burner box area. Use to replace a damaged or burnt harness for safer operation. What it does

• Routes electrical connections between igniters, sensors, switches, and control modules in the burner box
• Restores ignition or heating when a frayed or open harness prevents burners from sparking or heating
• Replaces harnesses with cracked insulation or melted connectors that can cause intermittent operation or arcing
• Helps eliminate electrical shorts and poor contact at connector plugs inside the burner box

• One burner box wiring harness as shown

• Disconnect all power (electrical and gas) before servicing; verify power is off
• Inspect connectors and routing in the burner box, replacing any mounting clips or fasteners if damaged
• Ensure correct connector seating and secure wiring away from high-heat components

This LED power supply powers and regulates the refrigerator's LED lighting, restoring reliable interior illumination. It replaces a failed driver to stop flicker and prevent LEDs from remaining dark or dim. What it does:

• Converts appliance line voltage to the proper low-voltage DC for LED strips
• Keeps LED lights stable and prevents flickering or intermittent operation
• Restores full brightness when a failed driver causes dim or no interior lighting
• Protects LEDs from irregular voltage that can shorten lamp life

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the board and connectors carefully to avoid static or physical damage.
• Basic hand tools and access to the light housing/panel are usually required.

This LED board is the refrigerator interior light assembly that restores bright, even illumination inside the fresh-food compartment for easier visibility and safer food access. What it does

• Powers and distributes LED light to illuminate the refrigerator interior
• Replaces a failed or dimming light board to stop flicker or complete loss of interior lighting
• Ensures even light coverage across the compartment for better visibility
• Works with the refrigerator's existing light housing and connectors to restore normal operation

• One LED board

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching LED components or circuitry
• Remove shelves and trim as needed to access the light housing; keep track of screws and retainers
• Reconnect all wiring and verify proper operation before reassembling the compartment

This pan unit is the replacement drip pan that fits under a cooktop burner to catch spills and crumbs, helping keep the range surface cleaner and simplifying cleanup. It restores the original drip collection function. What it does:

• Collects spills, crumbs and drips beneath the burner to prevent messes from reaching internal components
• Helps contain liquids and solids for easier surface cleaning
• Preserves cooktop appearance and reduces grime buildup that can affect performance
• Provides the correct bowl shape and support for burner elements

• Ensure the cooktop is completely cool and power (and gas, if applicable) is turned off before installing
• Remove old pan by lifting out the burner element (if applicable) and sliding the pan free; reverse to install
• Handle edges carefully—sheet metal can be sharp

This dual gas valve (front) controls gas flow to the oven/broil and bake burners so the range ignites and maintains heat. Replaces a failed valve to restore proper burner operation and reliable ignition. What it does:

• Opens and closes gas flow to separate burner circuits (bake/broil) for controlled heating
• Allows the oven to light and hold temperature when the thermostat calls for heat
• Commonly replaced when burners fail to ignite or oven won't heat consistently
• Works with standing pilot or electronic ignition systems depending on model design

• One dual gas valve (front) assembly

• Disconnect power and shut off the gas supply before servicing; follow all safety precautions
• Handle valve and fittings carefully to avoid damage to inlet/outlet ports and mounting surfaces
• Use proper thread sealant for gas fittings and test all connections for leaks after installation

This LED light assembly replaces a failed or damaged interior refrigerator light to restore bright, energy-efficient illumination inside the fresh-food compartment. It mounts in the light housing and connects to the factory wiring harness. What it does:

• Replaces burned-out or broken interior LED lighting
• Restores consistent, flicker-free illumination when the door is opened
• Helps you see foods and settings clearly on shelves and door bins
• Works with the factory light housing and wiring for a direct replacement

• Disconnect power to the appliance before beginning any work to avoid electric shock.
• Handle the LED assembly and connectors carefully; avoid touching LED surfaces or exposing contacts to moisture.
• Some installations require removing the light housing or interior trim; keep fasteners organized for reassembly.
• If mounting screws, brackets, or clips are not obvious, refer to the appliance's parts diagram or service manual to identify the correct removal order.

This LP conversion kit converts a compatible gas range or oven from natural gas to propane (LP) so burners operate with the correct orifice sizing and flame characteristics for safe, efficient cooking. What it does:

• Replaces factory orifices/jet fittings to match propane fuel requirements
• Ensures proper burner flame size and heat output after conversion
• Helps prevent weak or uneven flames that occur when using the wrong fuel type
• Includes the components needed to legally change fuel type per manufacturer instructions

• Kit components as supplied by the manufacturer

• Turn off the gas supply and electrical power before beginning work
• Follow the included instructions exactly; improper conversion can be unsafe
• After conversion, check for gas leaks and proper burner operation before regular use

This griddle top cover assembly replaces a damaged or worn cover on a cooktop griddle, restoring proper fit and appearance while helping contain heat and spills. It's a direct-replacement top cover used with compatible GE griddle assemblies. What it does:

• Covers the griddle surface to help contain grease and food debris during cooking
• Helps direct heat and maintain an even cooking surface for griddles
• Replaces warped, dented, or cosmetically damaged griddle covers
• Reduces exposure of internal components to spills and simplifies cleanup

• One griddle top cover assembly

• Disconnect power to the appliance before servicing; if gas appliance, also shut off gas supply
• Remove griddle and any retaining clips or screws to access and replace the top cover
• Handle edges carefully to avoid cuts; align cover and secure fasteners per OEM layout