Zisp480dtss Parts

This replacement freezer bottom hinge bushing helps the freezer door pivot smoothly and maintain proper alignment, reducing rubbing and uneven wear for more reliable closing. What it does:

• Provides a smooth pivot surface for the freezer bottom hinge
• Restores proper door alignment to help ensure a tight seal
• Reduces hinge noise, sticking, and rubbing during door movement
• Helps prevent premature wear of the hinge and door components

• One freezer bottom hinge bushing

• Disconnect power to the appliance and empty or support the door before starting
• Support the door while removing hinge fasteners to prevent falling or injury
• Inspect the hinge and shaft for wear; replace the hinge assembly if damaged
• Do not overtighten fasteners; test door operation after installation

This front pan seal replaces the worn gasket that seals the refrigerator's front drip/pantry pan, helping keep water contained and directing drainage properly to prevent puddling and odors. Fits the pan edge at the fridge base. What it does

• Creates a tight edge seal along the front of the refrigerator drain/drip pan to keep condensation and defrost water contained.
• Helps direct water toward the drain channel so it can evaporate or flow to the condenser pan.
• Reduces chance of water pooling on the floor near the refrigerator base.
• Can improve odor control by preventing trapped moisture under the pan.

• One front pan seal.

• High-level swap: remove lower kickplate (if present), peel out the old seal and press the new seal into the pan groove; follow OEM instructions for your model.
• Use gentle, even pressure to seat the seal fully into the pan channel; avoid stretching the seal excessively.
• If adhesive is used by the model, only apply OEM-recommended adhesive in small amounts.
• Disconnect power or follow safety steps before working near electrical components.

This water tank cover protects and seals the refrigerator's internal water reservoir, helping keep the tank clean and preventing debris from entering the water system. It restores the tank's enclosure after maintenance or replacement. What it does

• Covers and protects the refrigerator water tank to help maintain sanitary water storage
• Helps keep debris and dust out of the tank and water supply area
• Supports proper alignment and fit of the tank assembly when reinstalled
• Can reduce chances of water contacting nearby components during routine use

• This listing is for the water tank cover only

• Replace with the refrigerator powered off and water supply shut off when applicable
• Inspect mating tank and nearby seals for damage; replace any damaged components before reassembly
• Secure the cover in its correct orientation and verify it seats flush to prevent leaks

This bulb housing assembly secures the interior light bulb and socket, protecting the lamp and directing illumination so the appliance interior lights reliably. It replaces a damaged or loose housing to restore proper lamp mounting and appearance. What it does:

• Holds and supports the interior light bulb and socket for stable mounting
• Provides the bezel/cover that directs light into the compartment
• Protects the bulb from contact and reduces the chance of accidental breakage
• Restores proper electrical connection when the original housing is cracked or loose
• Common symptom link: interior light won't stay in place, is loose, or is partially covered

• One bulb housing assembly

• Disconnect power to the appliance before starting any service
• Handle glass or fragile parts carefully to avoid breakage or injury
• Verify alignment and secure all fasteners; wiring is connected correctly
• Use matched bulb type and rating as specified by the appliance manufacturer

This door ice bin is the removable plastic container that stores ice made by your refrigerator's icemaker. It keeps ice contained in the door for easy access and helps prevent spills inside the fresh-food compartment. What it does

• Holds and stores cubed ice produced by the icemaker so it's ready at the door
• Keeps ice from spilling into the refrigerator cavity when the door is opened
• Replaces cracked, damaged, or missing ice storage bins that cause leaks or loose ice
• Restores proper alignment with the door shelf for smooth removal and replacement

• Empty any loose ice before removing the old bin to avoid spills
• Typically installs by sliding into the door shelf track; lift slightly to remove
• Inspect door shelf guides for damage and align bin carefully when reinstalling
• Wear gloves when handling cold ice and avoid forcing the bin to prevent cracking

This freezer basket assembly replaces a damaged or missing freezer storage basket to keep frozen items contained and organized for easy access. It restores the freezer's storage layout and prevents small items from shifting or falling through. What it does:

• Provides a dedicated basket for storing and organizing frozen foods
• Helps contain loose items to prevent them from falling into lower compartments
• Restores proper storage layout when an original basket is cracked, bent, or missing
• Reduces clutter so items are easier to see and retrieve

• Unplug the appliance or disconnect power before starting any work
• Remove food, ice, and surrounding shelves or drawers as needed for access
• Typically installs by sliding or clipping into the freezer compartment; handle gently to avoid bending
• If fasteners are present, retain OEM screws/clips and reinstall securely.

This replacement bracket secures the freezer/refrigerator heater or defrost assembly in place to keep the heater aligned and stable for reliable defrost operation. It prevents movement that can cause poor contact or damage to the heater. What it does:

• Holds and positions the heater/defrost assembly within the freezer/refrigerator compartment
• Keeps heater clips and wiring stable to maintain proper heater contact
• Can prevent intermittent defrosting caused by a loose or broken bracket
• Useful when original bracket is cracked, bent, or missing mounting points

• Disconnect power to the appliance before servicing to avoid shock hazard
• Remove interior panels or shelves as needed to access the heater assembly
• Handle heater element and wiring carefully; do not pull or strain connections
• Use basic hand tools;

This master light switch kit replaces the main oven light switch assembly so the oven light turns on and off reliably. Designed for direct-fit replacement to restore normal oven lighting control. What it does:

• Replaces the oven's master light switch assembly that controls interior lighting
• Restores the ability to turn the oven/cabinet light on and off
• Helps eliminate flickering, intermittent operation, or complete light failure
• Works with existing wiring and mounting points for a straightforward swap

• One master light switch kit (assembly) as shown

• Disconnect power to the appliance before starting any work
• Basic hand tools required; follow OEM wiring and grounding instructions
• Verify proper operation after installation before returning appliance to service

This hardware pack provides the assorted fasteners needed to secure trim, panels, and small appliance components, helping replace missing or damaged screws and clips for a clean, stable fit. What it does

• Replaces lost or damaged screws, clips and small fasteners used on appliance trim and panels
• Helps stop rattling or loose panels by restoring proper fastening
• Secures small components during reassembly after maintenance or part replacement
• Useful when original mounting hardware is missing or corroded

• Disconnect power to the appliance before servicing to reduce shock risk
• Use the correct screwdriver or driver bit to avoid stripping fasteners
• Keep small parts away from children and pets; work on a covered surface to catch dropped pieces

This replacement link actuator controls the freezer linkage assembly to restore proper door/damper movement and component alignment. It's a direct-fit OEM-design part for affected GE refrigerators, helping stop sticking or misaligned freezer linkages. What it does:

• Engages the freezer linkage to move the damper/door linkage as intended
• Restores smooth movement when a frozen or stiff linkage causes binding
• Helps correct intermittent operation or noisy linkage movement
• Prevents further wear by replacing a worn or broken actuator

• One link actuator

• Disconnect power to the appliance before starting work
• Basic hand tools are typically required; remove any panels blocking access
• Handle the actuator and linkage gently to avoid damaging plastic gears or tabs
• Verify proper operation after installation; do not force parts into place