Ziss480nmss Parts

This pack contains twelve replacement screws used to fasten appliance panels, trim, and components. They restore secure mounting and help stop rattling, loose panels, and gaps for a safer, quieter appliance. What it does:

• Secures exterior and interior panels, brackets, and trim pieces
• Restores proper fit where missing or stripped screws cause movement or noise
• Helps maintain appliance alignment and prevents parts from vibrating loose
• Used for general-purpose repairs on compatible GE appliances

• Disconnect power or unplug the appliance before performing any internal repairs
• Use the correct screwdriver bit and avoid overtightening to prevent stripping threads
• Keep remaining screws in a labeled container for future service
• If a screw does not seat easily, stop and verify correct fit to avoid damage

This euro standoff kit provides the mounting hardware used to secure trim panels and components on compatible appliances, restoring proper panel alignment and preventing rattles or loose trim. It's a direct-fit replacement for the listed part number. What it does:

• Replaces worn or damaged mounting standoffs that hold panels or trim in place
• Restores secure panel attachment to reduce vibration, rattling, or misalignment
• Helps maintain proper spacing between panels and cabinet for correct fit and finish
• Designed to match the original part's fit and function for reliable repair

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove affected trim/panel carefully to access standoffs; retain screws and hardware
• Install standoffs in the original locations and tighten screws until snug — do not overtighten
• If alignment issues persist after replacement, check adjacent clips, fasteners, and mounting surfaces

This ice bin front is the replacement front panel that restores the ice storage compartment door and helps keep ice contained and accessible. Fits refrigerators that use a separate ice bucket front panel. What it does

• Replaces a cracked, chipped, or broken ice bin front to prevent ice spillage
• Restores the bin door/face for easy access to the ice bucket
• Helps maintain a proper seal between the ice compartment and refrigerator interior
• Useful when the original front panel is scratched, warped, or missing

• One ice bin front panel

• High-level replacement — remove the ice bin or access panel and swap the front panel; your model's service guide
• Power off or disconnect refrigerator per manufacturer instructions before working near electrical components
• Handle the plastic parts carefully to avoid cracking; use appropriate trim clips or screws if provided by your model

This genuine replacement screw secures appliance components and restores proper fit and function. Use it when original fasteners are missing, stripped, or corroded to stop loose panels and rattling and keep parts aligned. What it does

• Fastens panels, brackets, or small components to the appliance frame
• Replaces missing or damaged screws that cause loose trim or rattling noises
• Restores secure fit where threads are stripped or corroded
• Helps prevent further damage from loose parts by maintaining correct alignment

• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread and tighten by hand first, then snug — avoid over-tightening which can strip threads or crack plastic
• Disconnect power to the appliance before working on internal components
• Consider replacing the mating nut or insert for a secure repair

This replacement freezer bottom hinge bushing helps the freezer door pivot smoothly and maintain proper alignment, reducing rubbing and uneven wear for more reliable closing. What it does:

• Provides a smooth pivot surface for the freezer bottom hinge
• Restores proper door alignment to help ensure a tight seal
• Reduces hinge noise, sticking, and rubbing during door movement
• Helps prevent premature wear of the hinge and door components

• One freezer bottom hinge bushing

• Disconnect power to the appliance and empty or support the door before starting
• Support the door while removing hinge fasteners to prevent falling or injury
• Inspect the hinge and shaft for wear; replace the hinge assembly if damaged
• Do not overtighten fasteners; test door operation after installation

This water line cover protects and conceals the refrigerator's water supply tubing behind the lower kickplate for a finished look and reduced risk of accidental snagging. Durable plastic shields tubing from contact and helps keep the area tidy. What it does:

• Covers and protects the refrigerator water supply line from accidental pulls or abrasion
• Keeps the tubing out of sight for a neater appearance
• Helps reduce noise from loose tubing contact with other components
• Supports proper routing of the water line to the ice maker/water dispenser

• One water line cover

• Disconnect power and shut off the water supply before servicing
• Remove the kickplate or access panel per the owner's manual to reach mounting points
• Align cover with the routing area and secure with existing clips or fasteners; do not force or modify

This front pan seal replaces the worn gasket that seals the refrigerator's front drip/pantry pan, helping keep water contained and directing drainage properly to prevent puddling and odors. Fits the pan edge at the fridge base. What it does

• Creates a tight edge seal along the front of the refrigerator drain/drip pan to keep condensation and defrost water contained.
• Helps direct water toward the drain channel so it can evaporate or flow to the condenser pan.
• Reduces chance of water pooling on the floor near the refrigerator base.
• Can improve odor control by preventing trapped moisture under the pan.

• One front pan seal.

• High-level swap: remove lower kickplate (if present), peel out the old seal and press the new seal into the pan groove; follow OEM instructions for your model.
• Use gentle, even pressure to seat the seal fully into the pan channel; avoid stretching the seal excessively.
• If adhesive is used by the model, only apply OEM-recommended adhesive in small amounts.
• Disconnect power or follow safety steps before working near electrical components.

This hockey puck light assembly replaces a damaged or failed refrigerator/freezer puck socket and comes ready with its lamp and wiring harness for a quick lighting fix. Restores interior illumination and secure bulb connection. What it does:

• Provides the puck-style light socket, pre-wired for the factory harness connection
• Replaces a cracked or melted socket that can cause intermittent or no light
• Includes the lamp so the compartment has usable illumination right away
• Helps eliminate flicker or loss of interior lighting due to faulty wiring or contacts

• Disconnect power to the appliance before inspecting or replacing the lamp assembly.
• Handle the bulb carefully; allow it to cool before removal and wear gloves to avoid oils on the bulb.
• Inspect the mounting area and connector for damage; replace if the wiring or housing is burned or brittle.

This bulb housing assembly secures the interior light bulb and socket, protecting the lamp and directing illumination so the appliance interior lights reliably. It replaces a damaged or loose housing to restore proper lamp mounting and appearance. What it does:

• Holds and supports the interior light bulb and socket for stable mounting
• Provides the bezel/cover that directs light into the compartment
• Protects the bulb from contact and reduces the chance of accidental breakage
• Restores proper electrical connection when the original housing is cracked or loose
• Common symptom link: interior light won't stay in place, is loose, or is partially covered

• One bulb housing assembly

• Disconnect power to the appliance before starting any service
• Handle glass or fragile parts carefully to avoid breakage or injury
• Verify alignment and secure all fasteners; wiring is connected correctly
• Use matched bulb type and rating as specified by the appliance manufacturer

This door ice bin is the removable plastic container that stores ice made by your refrigerator's icemaker. It keeps ice contained in the door for easy access and helps prevent spills inside the fresh-food compartment. What it does

• Holds and stores cubed ice produced by the icemaker so it's ready at the door
• Keeps ice from spilling into the refrigerator cavity when the door is opened
• Replaces cracked, damaged, or missing ice storage bins that cause leaks or loose ice
• Restores proper alignment with the door shelf for smooth removal and replacement

• Empty any loose ice before removing the old bin to avoid spills
• Typically installs by sliding into the door shelf track; lift slightly to remove
• Inspect door shelf guides for damage and align bin carefully when reinstalling
• Wear gloves when handling cold ice and avoid forcing the bin to prevent cracking

This freezer basket assembly replaces a damaged or missing freezer storage basket to keep frozen items contained and organized for easy access. It restores the freezer's storage layout and prevents small items from shifting or falling through. What it does:

• Provides a dedicated basket for storing and organizing frozen foods
• Helps contain loose items to prevent them from falling into lower compartments
• Restores proper storage layout when an original basket is cracked, bent, or missing
• Reduces clutter so items are easier to see and retrieve

• Unplug the appliance or disconnect power before starting any work
• Remove food, ice, and surrounding shelves or drawers as needed for access
• Typically installs by sliding or clipping into the freezer compartment; handle gently to avoid bending
• If fasteners are present, retain OEM screws/clips and reinstall securely.