Control Knob Parts

This replacement control knob restores smooth, positive control of your range settings. It fits over the control shaft so you can turn burners or oven functions on and accurately set heat levels, with a clear position indication.

• Attaches to the control shaft to operate burners or oven functions and adjust settings
• Replaces cracked, stripped, or missing knobs
• Helps when the knob falls off, spins without adjusting, or is hard to turn
• Restores clear pointer alignment and a solid, secure feel

• Pull the old knob straight off the shaft; avoid prying on the control panel
• Align the flat/D-shaped opening with the shaft and press firmly until fully seated
• Disconnect power before accessing or servicing any controls behind the panel

Color: Black

The Grommet is an OEM part for Whirlpool gas cooktops. It forms a protective barrier and seal where wiring or mounting bolts pass through ventilation cutouts.

Causes of a bad grommet typically include degradation of the rubber material over time due to heat exposure during cooking. Physical stress from repeated installation/removal can also crack or loosen the seal.

Symptoms of a bad grommet include:

• Air leaks appearing around wiring/bolt openings  
• Drafts disturbing burner or element temperatures
• Noise from loose fixtures rattling 
• Risk of sparks near exposed connections

Replacing with an OEM grommet restores the protective seal while blending seamlessly with range aesthetics. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore cooktop models. 

This ring nut is a small threaded retaining nut that secures a mating component to its shaft or connection, restoring a stable mechanical or sealed connection and reducing movement or leaks when properly installed. What it does:

• Holds a shaft, tube or fitting in place by threading onto the mating component
• Prevents components from working loose and reduces rattling or vibration
• Helps maintain a sealed connection where used on fittings or hose connections
• Useful when a stripped or missing nut causes loose hardware or intermittent operation

• One ring nut

• Disconnect power and shut off water before beginning work
• Inspect mating threads and replace if damaged; clean threads before installing
• Hand-start threads to avoid cross-threading, then tighten with appropriate tool; avoid overtightening

This is the control knob for a surface burner's mini valve. It fits over the valve stem so you can turn the burner on/off and adjust the flame level smoothly and safely.

• Rotates the burner's mini valve to control gas flow and flame size
• Replaces a cracked, stripped, missing, or melted knob
• Helps when the knob no longer engages the valve or is hard to turn
• Restores normal feel and control of the burner

• Disconnect power and shut off gas before beginning work
• Pull the old knob straight off the valve stem; align and press the new knob on
• Do not force—verify the flat/D orientation on the stem matches the knob
• Test burner operation and knob travel after installation

This replacement control knob fits the surface element infinite switch, letting you turn the burner on and choose the heat level. Replace a cracked, stripped, or missing knob to restore smooth, reliable control and a clean, matched finish.

• Attaches to the infinite switch stem to select burner settings from Off to High
• Restores proper feel and engagement when the original knob is worn or broken
• Common symptoms: knob splits, wobbles, falls off, is hard to turn, or won't engage the switch
• Color-matched white to blend with compatible control panels

• Disconnect power to the range/cooktop before servicing
• Pull the old knob straight off the switch stem; avoid prying on the control panel
• Align the new knob with the stem and press firmly until fully seated
• The pointer aligns to Off before restoring power

This white control knob replaces a worn or missing knob so you can smoothly select settings on your appliance again. It restores dependable turning feel and a clean, like-new appearance on the control panel.

• Attaches to the control shaft so you can select levels or functions
• Common fix for cracked, stripped, loose, or missing knobs
• Helps when the knob spins freely or is hard to turn
• Maintains clear alignment with the panel's indicator marks

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the shaft
• Align the new knob with the flat or splined shaft and press on until fully seated
• Verify smooth movement from OFF through all settings

This replacement control knob restores smooth, precise adjustment of your cooktop's surface burner. A worn or cracked knob can be hard to turn or fail to set the flame correctly—swap it out to regain reliable control and a clean, finished look.

• Turns the surface burner valve stem to control flame/heat level
• Helps fix symptoms like slipping, sticking, cracks, or missing knob
• Restores accurate burner setting and easy grip for daily use
• Color-matched to blend with compatible appliances

• Disconnect power and allow all burners to cool before servicing
• Pull the old knob straight off the valve stem; align and press on the new knob
• Do not force—verify the flat (D) orientation on the stem matches the knob insert
• Test each burner for proper operation after replacement

This surface burner knob replaces a worn or missing control knob on your gas cooktop or range, restoring precise flame adjustment and a clean, finished look. It fits onto the burner valve stem for smooth, reliable operation.

• Turns the surface burner valve to control flame level from low to high
• Common fix for knobs that are cracked, stripped, loose, hard to turn, or missing
• Helps when burner heat is difficult to set or won't hold steady
• Restores consistent, easy-to-grip control of the burner

• Turn off power and ensure all burners are cool before starting; shut off gas supply if working near the control area
• Pull the old knob straight off the valve stem—do not pry against the control panel
• Align the new knob with the stem orientation and press firmly until fully seated
• Test burner operation to confirm smooth adjustment through the full range

Control knob restores a worn or damaged range/stove control interface so you can select settings reliably. Installs quickly to replace missing, cracked, or loose knobs and improve control feel. What it does:

• Replaces a damaged or missing flush-style control knob so you can select heat/power settings accurately.
• Fits over the control shaft to provide a secure grip and tactile feedback when turning.
• Common symptoms: broken, loose, cracked, or missing knob; difficulty selecting or holding settings.
• Helps prevent accidental setting changes compared with a worn or slippery knob.

• One control knob

• Disconnect power to the appliance and turn off gas supply before beginning work.
• Remove the old knob by pulling it straight off the control shaft; align and push the new knob onto the splines until it seats.
• Do not force a knob that doesn't fit—verify shaft type and orientation before installing.
• After installation, restore power/gas and test all control positions for correct operation.

Color: Black

This control knob restores secure, tactile operation to a damaged or missing appliance control. It makes setting selection easy and helps return the control shaft to safe, predictable use. What it does:

• Replaces a worn, cracked, or missing control knob to restore manual control
• Provides a firm grip and detent feedback for accurate setting selection
• Fits directly onto the control shaft to enable normal operation of the control
• Useful when a knob is loose, won't turn, or is cosmetically damaged

• Disconnect power (unplug or turn off breaker) before servicing electrical appliances
• Pull the old knob straight off the control shaft and push the replacement on until fully seated
• If the new knob won't seat, inspect the control shaft and any retained insert for damage before forcing

This replacement control knob restores user control for a worn, cracked, loose, or missing range/stove burner control. It gives a secure grip for adjusting heat settings so you can safely and accurately set cooking temperature. What it does:

• Replaces a damaged or missing burner/control knob so the control shaft can be turned easily and reliably.
• Provides a firm, tactile interface for selecting oven or surface-burner heat settings.
• Helps eliminate slipping, wobble, or a knob that won't stay on the control shaft.
• Restores normal operation when the original knob is cracked, stripped, or otherwise unusable.

• Before servicing, turn off power to the appliance (unplug or shut off breaker) and, for gas ranges, shut off the gas supply.
• Installation is usually simple: align the knob on the control shaft and press until fully seated; ensure it sits securely and turns smoothly.
• Use only the exact replacement designed for your appliance.

The Knob is an OEM part for Frigidaire ranges. It is responsible for controlling the various functions and settings of your range, allowing you to adjust the temperature and operate the burners.

A bad knob can occur due to wear and tear over time, accidental damage, or exposure to heat and moisture. Signs of a faulty knob include difficulty in turning, a loose or wobbly fit, or the control markings wearing off.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting 
• The knob feeling loose
• Cracks or discoloration 

Replace your worn-out or damaged range knob with this genuine OEM Frigidaire part to restore your range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Color: White

This replacement control knob restores user control of your range or oven by turning temperature and function settings smoothly and visibly. It's a direct-fit style knob used on many Frigidaire cooktop and oven models. What it does

• Provides a secure grip to adjust burner or oven settings.
• Replaces cracked, stripped, or missing knobs that prevent accurate control.
• Restores tactile click and alignment for clear setting indication.
• Helps prevent accidental setting changes with a snug fit on the control shaft.

• One control knob as pictured.

• Pull the old knob straight off the control shaft and push the new knob on until fully seated.
• Confirm the shaft and knob orientation match so indicator lines align with control markings.
• Unplug the appliance or shut off power at the breaker before accessing internal controls when disassembly is required.
• If the knob feels loose or won't seat, inspect the control shaft for damage—do not force the knob.

This replacement knob controls the AccuSimmer surface burner on select ranges/cooktops. It restores smooth, accurate setting selection—including delicate simmer—when the original knob is cracked, stripped, loose, or missing.

• Provides user control to turn the burner on/off and set heat levels, including low AccuSimmer settings
• Common symptoms: cracked or missing knob, loose or free-spinning fit, or worn markings that make settings hard to read
• Helps restore proper feel, alignment, and readability at the burner control
• Note: A damaged or deformed valve stem will prevent proper operation even with a new knob

• Disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; align the new knob with the stem and press straight on until fully seated
• Ensure both the valve and the new knob are set to Off before installation
• Do not force; if resistance is excessive, inspect the valve stem for damage