Solenoid Parts

This switch assembly replaces a faulty E34 - 19HV switch to restore proper electrical control in the appliance. It provides the same fit and function as the original to help re-enable the affected control circuit safely. What it does:

• Acts as the electrical switch that completes or breaks a circuit when engaged
• Restores normal operation when a failed switch causes intermittent or no response
• Commonly associated with control failures, unresponsive buttons, or power-related symptoms
• Matches OEM form and mounting to fit into the original switch location

• Always disconnect power to the appliance before servicing
• Handle wiring and connectors carefully; note wire locations or take a photo before removal

This connector restores a secure electrical connection between wires in the appliance, helping return reliable power and control to the affected circuit. It's a direct replacement designed to match the OEM fit and function. What it does:

• Joins two or more wires to complete an electrical circuit
• Replaces damaged, corroded, or loose terminals that cause intermittent power or control failures
• Provides a stable connection to reduce arcing and heat build-up at the joint
• Useful when visual damage or burnt insulation is present on the original connector

• Disconnect power to the appliance before servicing to avoid shock or injury
• Confirm wire colors and orientation before removing the old connector to ensure correct reassembly
• Use proper crimping or connector tools per OEM guidance; do not rely on loose twisting or temporary fixes
• If wiring or insulation is damaged beyond the connector, inspect and repair the harness.

This latch switch secures the appliance door and signals the control when the door is closed, helping the unit operate safely and reliably. It's a direct-fit replacement that restores reliable door engagement and switch activation. What it does:

• Physically latches the door and provides the electrical switch signal to the control
• Prevents operation when the door is not fully closed or latched
• Common symptom: appliance won't start or cycles because the door isn't registering closed
• Common symptom: door won't stay securely latched or feels loose when closed

• Disconnect power (unplug or shut off circuit breaker) before installing to avoid shock
• Installation typically requires removing the door or control panel and basic hand tools
• Handle the switch and wiring harness carefully; avoid forcing connectors
• Test door operation and continuity of the switch before reassembling

This triple water inlet valve replaces the refrigerator valve that controls water flow to the dispenser and ice maker. It restores proper water routing so the dispenser and ice maker can fill and operate as intended. What it does:

• Directs and controls incoming water to the dispenser, icemaker and other water circuits
• Opens and closes solenoids so the ice maker and dispenser can fill when called for
• Commonly used when the dispenser or ice maker won't produce water or fills weakly
• Can cause water to drip or run if the valve leaks or fails to seal

• Disconnect power and shut off the water supply before starting work
• Relieve water pressure and place towels/pans to catch residual water
• Handle electrical connectors and mounting hardware carefully; replace gaskets or fittings if damaged
• Test for leaks and proper operation after installation

This solenoid assembly is an electromechanical plunger actuator that restores linear motion to a linked mechanism. Replacing a failed solenoid helps return reliable actuation for latches, valves or dispenser-style components and stops intermittent or non-moving operation. What it does

• Converts electrical signals into linear movement to operate a latch, valve or dispenser actuator.
• Typical symptoms: clicking or humming without movement, intermittent operation, or complete loss of actuation.
• Restoring the solenoid can eliminate sticking mechanisms and return consistent operation.

• Disconnect power (and water, if applicable) before starting work to avoid shock or flooding.
• Remove access panels and note wiring locations; reconnect matching connectors securely.
• Handle the plunger and coil carefully; do not force into place or bend mounting tabs.
• Test operation after installation.

The Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer tub at designated stages in the washing process. Water enters through the valve inlet and is distributed to internal components like the detergent dispenser, water pipes, and sump hoses. 

Causes of a bad valve can include mineral scale buildup inhibiting proper flow regulation over time, or cracks and leaks from wear and tear on rubber gaskets and seals. 

Symptoms of a bad valve include:

• Slow or incomplete fills during washing cycles  
• Water not dispensing correctly through hoses or dispensers
• External water leaks from the valve area
• Error codes related to water level or pressure issues

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Valve Assembly is an OEM part for LG refrigerators. It controls the flow of water into the refrigerator's ice maker and water dispenser, ensuring a steady and controlled supply. This valve opens and closes in response to electrical signals from the refrigerator, allowing water to enter the appropriate compartments for ice making and dispensing.

Over time, the water valve can wear out or become damaged due to mineral deposits, wear and tear, or electrical issues. A malfunctioning water valve can lead to problems such as water not dispensing correctly or the ice maker not producing ice.

Symptoms of a bad water valve assembly include:

• No water dispensing from the refrigerator
• Ice maker not producing ice
• Leaking water from the valve area
• Unusual noises coming from the valve

This OEM LG part is also compatible with Sears/Kenmore.

The Water Valve and Tube Assembly is an OEM replacement part for GE side-by-side refrigerators. It serves as the inlet valve installed inside the fresh food compartment. 

Causes of a faulty assembly can include mineral buildup inhibiting proper valve opening or cracking/splitting of aging plastic tubes. Electrical issues affecting the valve solenoid may also develop over time.

Symptoms of a problematic assembly include:

• Ice maker or water dispenser unable to consistently produce ice/water  
• Leaks present around the rear inlet area
• Valve components failed to activate 

Compatible models also include Profile and Monogram side-by-side refrigerators.