Front Litton Parts

This shelf stud secures a refrigerator shelf to the cabinet liner so the shelf stays level and stable. Replaces a cracked or missing stud to restore proper shelf seating and prevent sudden shelf drops. What it does

• Locks a refrigerator shelf into the cabinet liner and holds the shelf edge in place.
• Prevents shelf sagging, shifting, or sudden falls when loading items.
• Stops rattling or loose shelf movement caused by a broken or worn stud.
• Simple replacement fix when a plastic stud is cracked, stripped, or missing.

• Unplug the appliance or shut off power before service to avoid electrical hazard.
• Remove the shelf or glass first to access the mounting point; handle glass with care and wear gloves.
• Press or snap the stud into the liner hole until fully seated; avoid forcing or over-stressing the liner.

This front panel assembly replaces a damaged or worn control-panel face to restore the appliance's front appearance and provide a secure mounting surface for controls. It keeps the control area sealed and looking factory-fresh. What it does:

• Replaces the visible front/control panel to cover and protect underlying controls and electronics
• Provides a mounting surface for buttons, knobs, or the touch-control interface
• Helps prevent dirt, grease, and moisture from reaching internal components
• Common repair for cracked, discolored, or broken control-face panels

• One front panel assembly as shown

• Installation requires removing the range/oven console and disconnecting power first — disconnect power at the breaker or unplug the appliance
• Handle panels and clips carefully to avoid damaging trim tabs or painted surfaces
• Use proper fasteners and alignment during reassembly; verify controls and display function before returning the appliance to service
• Label connections and take photos for reference

This kickplate (toe plate) replaces the lower front trim on compatible refrigerators to restore appearance and protect the cabinet base from scuffs and drafts. Durable sheet-metal construction keeps the front edge looking clean. What it does:

• Covers and protects the refrigerator's lower front area from kicks, scuffs and dirt.
• Restores a secure trim piece when the original is bent, dented or loose.
• Helps reduce visible gaps at the cabinet base for a neater fit.
• Improves appliance appearance after damage or during refurbishment.

• Disconnect power to the appliance or follow the manufacturer's safety guidance before beginning work.
• Remove the old kickplate by loosening the retaining screws or clips; lift out and set aside.
• Align the replacement plate, engage any clips or tabs, and reinstall screws; avoid overtightening.

Color: White

The Outer Door Panel is an OEM replacement part for Whirlpool dishwashers. It serves as the external covering for the dishwasher door, providing protection and an aesthetic appearance.

A bad outer panel can occur due to accidental impacts, wear and tear, or exposure to harsh cleaning chemicals. If you notice symptoms such as cracks, dents, or an unsightly appearance on the outer panel, it may be time to replace it.

Symptoms of a bad outer panel include:

• Cracks or dents on the panel
• Unsightly appearance or discoloration
• Difficulty in opening or closing the dishwasher door

Repair your dishwasher by replacing the faulty or damaged door outer panel with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This control panel front is the exterior cover for the appliance's electronic control area, restoring the unit's finished appearance and protecting buttons and displays from dirt and damage. It's a direct-fit cosmetic and protective replacement. What it does:

• Covers and protects the appliance control keypad and display from spills, dust, and wear
• Provides the correct surface for buttons and touch controls to operate properly
• Restores the appliance's original look when the factory panel is cracked, scratched, or discolored
• Helps prevent moisture and debris from reaching internal electronics

• High-level replacement: remove power and access the control housing before swapping panels
• Typical procedure: detach outer trim or bezel, remove fasteners holding the old panel, transfer any mounted buttons or overlays, then secure the new panel
• Use caution around glass, sharp edges, and wiring; avoid forcing connectors

This quick chill pan assembly helps direct cold from the evaporator to the freezer compartment so items chill faster and maintain even temperatures. Designed as a direct-replacement evaporator pan for compatible freezers. What it does

• Moves cold from the evaporator area into the freezer to improve cooling consistency.
• Helps reduce warm spots on the freezer floor so stored items chill more evenly.
• Supports proper drainage and defrost flow in models that use a dedicated chill pan.
• Commonly replaced when the freezer is slow to cool or the interior shows uneven temperatures.

• Disconnect power to the appliance before beginning any repairs.
• Refer to the OEM service manual for model-specific removal and reassembly steps; some disassembly of the evaporator cover is usually required.
• Avoid bending or contacting evaporator fins and tubing; do not attempt sealed-system repairs.

This replacement console trim panel restores the appliance's front/control appearance and protects internal controls from spills and dust. It helps keep the control area looking finished while maintaining access to buttons and displays. What it does:

• Replaces a cracked, dented, or faded control-area panel to improve appearance
• Protects buttons, switches and the display opening from debris and moisture
• Keeps the control area properly aligned so buttons and indicators operate cleanly
• Useful when the original panel is damaged but internal electronics are intact

• Disconnect power to the appliance before starting any work
• Remove only the fasteners and trim pieces required to access and replace the panel
• Handle with care to avoid scratching the finished surface during installation

Refrigerator Vegetable Drawer Lower Assembly is designed to restore the functionality of your Samsung refrigerator's vegetable compartment. This genuine OEM part ensures a perfect fit and reliable performance, maintaining optimal organization within your fridge. Crafted from high-quality materials, the lower assembly provides sturdy support for your vegetable drawers, helping to keep your produce fresh and easily accessible. Installation is straightforward, allowing you to quickly replace a cracked, missing, or damaged part without hassle. Compatible with a wide range of Samsung refrigerator models, this genuine OEM part guarantees durability and longevity. By choosing the Refrigerator Vegetable Drawer Lower Assembly , you enhance the efficiency of your appliance, ensuring your vegetables stay organized and preserved. Trust in this genuine OEM part to deliver seamless integration and superior performance for your Samsung refrigerator, providing you with a reliable solution to maintain the quality and freshness of your stored items.