Module Dispenser Parts

This refrigerator ice maker assembly automatically fills, freezes, and ejects cubes into the storage bin. Replace it to restore dependable ice production when the original unit stops making ice, won't harvest, leaks from the mold, or overfills. What it does

• Performs automatic fill, freeze, and harvest cycles to produce ice
• Controls water-fill timing for each cycle
• Stops ice production when the bin is full
• Common symptoms: no ice production, won't eject/harvest, overfilling or dripping from the ice maker, loud clicking/jammed ejector

• Ice maker assembly (1)

• Disconnect power and turn off the refrigerator's water supply before servicing
• Remove the ice bin/cover, unfasten mounting screws, and disconnect the wire harness
• Position the new assembly, align with the fill tube, reconnect the harness, and secure with screws
• Restore power and water; check for proper alignment and allow time for ice production to normalize

This ice maker assembly produces and harvests ice for compatible refrigerators, replacing a failed or damaged ice-making unit to restore normal ice production and cycling. Designed as a direct-replacement service part for units that use this OEM assembly. What it does:

• Forms, freezes, and harvests ice automatically as part of the freezer's ice-making cycle.
• Common symptoms it addresses: little or no ice production, ice maker not cycling, or ice trays not filling.
• Works with the refrigerator's water inlet and control signals to dump ice into the bin when ready.
• Replaces a defective ice-making module to stop intermittent operation or visible damage to the ice tray.

• Disconnect power and shut off the water supply before beginning replacement.
• Remove the ice bin and interior trim panels as needed to access the ice maker; keep track of mounting screws.
• Disconnect the wiring harness and water inlet tube carefully; avoid forcing connectors or pinch points.
• After installation, restore power and water, check for leaks, and run the ice-maker test/diagnostic cycle per the refrigerator's service instructions.

This cover cap replaces a worn or missing finishing cap to restore a clean appearance and protect an exposed fastener or opening on compatible LG appliances. It helps keep dirt and moisture away from the underlying hardware. What it does:

• Covers and protects exposed screws, bolts or openings to improve appearance.
• Helps reduce debris buildup and potential corrosion on the underlying hardware.
• Restores the finished look when the original cap is cracked, broken, or missing.
• Simple cosmetic replacement that prevents small objects from entering the opening.

• Snap-in or press-fit style; align with the opening and press firmly until seated.
• If a fastener is present, remove the fastener before installing the cap; reuse the original fastener.
• Disconnect power and water before servicing to reduce risk of shock or damage.
• Use a non-marring tool and moderate force to avoid scratching surrounding surfaces.

This electronic control board is the appliance's main control module that manages cycles, timing, and user-interface functions to restore normal operation. Replace a failed board to help resolve control, display, and cycle problems. What it does:

• Regulates cycle timing, motor and heater control, and other automated functions
• Interprets user commands from the control panel and runs selected cycles
• Sends/receives signals to sensors, relays, and displays for coordinated operation
• Commonly used to address symptoms like unresponsive controls, no or erratic display, or appliances that won't start or complete cycles

• Disconnect power before accessing the control area to avoid shock or damage
• Handle the board by the edges and avoid electrostatic discharge; use grounding methods if available
• Verify the board PN on the old part matches W10597041 before installing

The Dispenser Drawer is an OEM part for Whirlpool washing machines. It is responsible for properly dispensing the correct amount of laundry detergent at the appropriate time in the wash cycle. The detergent dispenser drawer is specifically designed to hold laundry detergent pods or liquid in its molded compartments.

Causes of a damaged detergent dispenser drawer can include corrosion or degraded plastic parts over time caused by repeated exposure to laundry detergents.

Symptoms of a malfunctioning dispenser drawer include:

• Improper dispensing or no dispensing of detergent during wash cycles
• Residue buildup or leaks from the dispenser area
• Drawer not opening or closing securely as intended
• Dispenser components broken, cracked, or non-functional

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement electronic control module that manages the appliance's cycle functions and user commands, restoring reliable control and timing when the original module fails. Replaces a faulty control assembly to help return normal operation. What it does:

• Controls cycle timing, power distribution, and signals between sensors and the user interface.
• Replaces a failing control when the appliance won't start, is unresponsive to button presses, or stops mid-cycle.
• Works as the central command board that interprets inputs and runs programmed cycles.

• 1 Module control assembly

• Disconnect power (and water supply for washers) before attempting any repair.
• Handle the board by its edges and avoid touching components; use anti-static precautions if available.
• Reconnect all wiring harnesses and secure mounting hardware before restoring power.

This user interface housing is the front console shell that holds and protects the control buttons and display, restoring the appliance's look and secure fit for the control components. What it does

• Secures the control board, buttons and display in the appliance console
• Protects electronics from light impact, dust and everyday wear
• Restores proper button alignment and front-panel fit and finish
• Helps resolve issues caused by cracked, warped or broken console housing

• One user interface (UI) housing / front console housing

• Disconnect power to the appliance before starting any repair
• Removal typically requires detaching the console and transferring the display, buttons and any mounting clips to the new housing
• Handle with care to avoid scratching the finish or damaging snap clips and wiring

This is a dishwasher control board assembly. This component manages the functions of the dishwasher, which includes washing, draining, and drying. Since this part controls all of the functions of the dishwasher, if there are any problems with the operation it could be due to the control board assembly. This may include the washing cycle not running, the dishwasher not filling with water, or the detergent dispenser not opening during the washing cycle. If the user is unsure if this part is the culprit, a professional will be able to diagnose the issue. Unplug the dishwasher from its power source before replacing this part. The person performing the replacement may also wish to wear work gloves to protect their hands.This component is sold individually. It is compatible with dishwashers that are manufactured by Frigidaire, Whirlpool, and Electrolux. It is sourced directly from the manufacturer.

This electronic control board replaces the oven's main control module to restore user interface and timed bake/clock functions. It provides the control logic that manages heating cycles and display feedback for the range. What it does:

• Serves as the oven's primary control module, interpreting commands from the touchpad or knobs
• Controls bake/broil elements, timers, and display outputs through relay/signaling circuits
• Common symptoms: blank or unresponsive display, no heat or heating cycles won't start, or controls do not respond
• Replaces a failed or intermittent board that causes erratic oven behavior

• One electronic control board assembly

• Disconnect power at the breaker before beginning service to avoid shock or injury
• Handle the board carefully and avoid touching connector pins or components; static discharge can damage electronics
• Verify wire harness orientation and secure all connectors before restoring power.

The Refrigerator Ice Scoop is an essential accessory for maintaining the functionality of your Samsung refrigerator. Crafted as a genuine OEM part, this ice scoop ensures a perfect fit and reliable performance with your appliance. Designed for ease of use, the scoop allows you to effortlessly retrieve ice from your freezer, enhancing your daily kitchen experience. Its sturdy construction provides durability, ensuring long-lasting use without compromising on quality. The ergonomic handle offers a comfortable grip, making it simple to scoop ice without spills or mess. By choosing the Refrigerator Ice Scoop , you are investing in a component that seamlessly integrates with your Samsung refrigerator, maintaining its original performance standards. This genuine OEM part not only restores the ice dispensing functionality but also helps in keeping your kitchen organized and efficient. Easy to install, the ice scoop is a practical solution for anyone looking to replace a worn or missing part, ensuring your refrigerator continues to operate smoothly and effectively.

This dispenser facade replaces the outer trim pieces around your refrigerator's ice and water dispenser, restoring appearance and proper fit for smooth operation and sealing. It's a direct-fit cosmetic and protective assembly. What it does:

• Covers and protects the dispenser opening and controls from damage and debris
• Provides a finished look and helps direct water/ice into the cup
• Restores proper alignment when cracked, warped, or broken facade causes interference
• Helps prevent drafts and minor water splash at the dispenser area

• Disconnect power and shut off water to the appliance before servicing
• Many installations require removing the dispenser bezel and releasing snap-clips or screws; save hardware for reinstallation
• Handle plastic trim carefully to avoid scratches; use a soft pad when setting parts down

The Dispenser Assembly is an OEM replacement part for GE refrigerators. This actuator is responsible for controlling the functions of the refrigerator's dispenser, allowing you to dispense water or ice.

A bad dispenser actuator assembly can occur due to wear and tear, damage, or component failure over time. If you notice symptoms such as the dispenser not responding to your input, loose or wobbly movement of the actuator, or the dispenser not dispensing water or ice properly, it may indicate a need to replace the actuator assembly.

Symptoms of a bad dispenser actuator assembly include:

• Unresponsive dispenser
• Loose or wobbly actuator movement
• Improper dispensing of water or ice

Restore your refrigerator's dispenser by replacing the faulty dispenser actuator assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This scraper blade replaces a worn or damaged cleaning scraper to help remove baked-on food and residue from appliance surfaces, restoring the tool used for safer, easier cleanup. Ideal when the existing scraper is dull or broken. What it does:

• Provides a sharp edge to lift and remove stubborn, baked-on spills and residue from glass and smooth appliance surfaces
• Helps restore proper scraping action when the original blade is nicked, bent, or missing
• Reduces the need for excessive scrubbing or abrasive cleaners that can damage surfaces
• Commonly used to address poor cleaning results or an unusable scraper tool

• Disconnect power to the appliance and allow all surfaces to cool fully before handling
• Handle the blade carefully; edges may be sharp—wear cut-resistant gloves
• Replace only the damaged scraper blade; follow OEM instructions for securing the blade if required
• Test scraping action gently after installation to ensure proper fit and avoid surface damage

This removable cooktop griddle provides a flat, durable cooking surface for preparing pancakes, sandwiches and other foods over range burners. It restores a smooth, even surface for stovetop griddle cooking when the original is damaged or worn. What it does:

• Replaces a worn, warped or damaged cooktop griddle to restore an even cooking surface
• Provides a flat, continuous surface for foods that need consistent contact with heat
• Helps reduce hot spots and sticking when the original griddle surface is compromised
• Works with compatible range/cooktop configurations that accept a removable griddle plate

• One removable cooktop griddle plate

• Disconnect power to the appliance (and turn off gas if applicable) before handling parts
• Allow the appliance and griddle to cool completely before removal or installation
• Fit the griddle into the cooktop openings so it sits flat and level; verify proper seating before use
• Clean per manufacturer guidance; avoid abrasive tools that can damage the cooking surface

This ice container catches and stores ice from the refrigerator icemaker so cubes stay contained and easy to access. Replacing a damaged bin restores tidy ice collection and prevents spills inside the freezer. What it does:

• Collects and stores ice produced by the icemaker, keeping cubes contained and accessible.
• Fits into the freezer icemaker housing to position under the dispenser or harvest area.
• Common symptoms indicating replacement: cracked or warped bin, ice spilling onto the shelf, or ice that won't stay contained.
• Durable plastic construction keeps ice sanitary and helps prevent unnecessary mess.

• Disconnect power to the refrigerator before starting to avoid injury.
• Empty the old ice and remove any retaining clips or fasteners, then slide the replacement bin into the housing until it seats.
• Do not force the bin into place; ensure the icemaker arm and related components clear the bin and that it sits level.

The Dispenser Drawer is an OEM part for Whirlpool washers. It is responsible for dispensing detergent, fabric softener, and bleach during the wash cycle, ensuring even distribution and cleaning of your laundry.

A bad dispenser drawer can occur due to regular use, buildup of residue or clogs, or damage caused by mishandling. If you notice issues such as the dispenser drawer not opening or closing properly, leaks or drips from the dispenser area, or detergent not being dispensed correctly, it may indicate a problem with the dispenser drawer.

Symptoms of a bad dispenser drawer include:

• Improper dispensing of detergent
• Leaks or drips from the dispenser area
• Difficulty in opening or closing the drawer

Replace your faulty dispenser drawer with this genuine OEM Whirlpool part to your washer.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.