Need Help?
Call or text
Routes water from the filter housing to the outlet. Replace if cracked, kinked, leaking, or broken to restore proper water flow and prevent leaks.
Replaced the tube. The original part number could not be found. This tube that we ordered had an curved connector at the bottom and a hard connector on top. The original tube had a right angle connector on the bottom and a smaller connector on the the top. The curve on the bottom worked. We had to cut the top connector off the tube for it to fit. We then secured it with the original metal bracket at the top. No leaks! All working fine now. Read more
Plastic water line that runs from the water valve to the icemaker fill tube. Replace if cracked, brittle, broken, or leaking at connection points.
Thanks to the AppliancePartsPro, I ordered it online and received it quickly. I even used the step by step directions on how to replace the tube from the AppliancePartsPro website. Just be very careful and review the instructions first. Couple of important things: 1. Take a picture of the existing wiring and tubes before you take them apart. 2. *if* you remove the wires ( red and white plugs) from the valve, make sure you plug them back in correctly. 3. Do not pull or push the tubes hard. Use... Read more
Carries fresh water between the valve, reservoir, dispenser, and ice maker. Replace if cracked, kinked, or leaking to restore proper water flow.
First we tried to change the filter. Water was leaking from the area of the filter when we changed the filter. We purchased an "original" Fridgidaire filter, no change. Did some research on the internet and decided to change the two tubes and the filter valve (at the back of the filter housing). Must have been the right diagnostic and the right part to make the repair, Gave me an opportunity to clean the condenser coils as well. After 6 years of service they needed it badly. Read more
Defrost drain tube kit installs in the fresh food section to improve drain heat transfer and water routing. Replace if tube is cracked, clogged, or frozen.
Straight 1/4-inch coupler joins two sections of refrigerator water tubing. Replace when cracked, leaking, or missing to restore connections.
Replaced hoses. They were not an exact replacement but they did end up working with the purchase of one additional fitting (5/16 x 1/4 coupler) Read more
Connects inlet valve to water system in your refrigerator. Replace if cracked, kinked, or leaking at connections to restore leak-free water flow.
Water line coming out of inlet valve to ice maker was cracked. Removed the paperboard cover from the bottom of the back of the fridge, then unplugged the water line going from the inlet valve to the ice maker. Wasn't sure this new tube was going to work, because the original had an elbow on it. Fit just fine. Removed grille from front and disconnected other end of ice maker water line. Attached new line and now I have ice! Read more
Water tube that routes supply from inlet valve to filter housing. Replace if cracked, kinked, or leaking to restore proper water flow to dispenser.
Routes water from the valve to the dispenser and ice maker. Replace if cracked, kinked, or leaking to restore proper flow and prevent water damage.
The online video to change the water tube from the solenoid to filter was very helpful. It made the project straightforward. I had to replace the water tank tube as well. It was more challenging because there was no video for my model refrigerator (Frigidaire French Door) but a side-by-side unit video provided enough hints. The hardest part was getting the tube into the tank housing. The original water tank was smaller than the replacement. It required some serious persuasion to squeeze... Read more
Extends your washer's drain hose to reach distant standpipes or sinks. Includes coupler and clamps. Replace when you need extra length for installation.
Attached drain hose extension and it more than reached the drain. Read more
Plastic tube that routes water between internal refrigerator components. Replace if cracked, kinked, leaking, or brittle to restore water flow.
The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more
Replaces a cracked, leaking, or worn water dispenser spigot on your refrigerator. Routes water from the internal supply to the dispenser outlet.
Water fill extension tube assembly directs water into your ice maker's fill cup. Replace if cracked, misrouted, or blocked to prevent leaks or ice buildup.
Plastic fill tube that supplies water to the ice maker. Replaces cracked, broken, or detached tubes causing leaks in bottom-mount refrigerators.
Replaced one hose and union with clip. Read more
Routes water from supply to filter housing inside your refrigerator. Replace if damaged, cracked, or leaking to restore a secure water path.
Pulled shelves, filter, and filter housing, removed back panel, disconnected water line. Ran new line from water tank to valve, hooked up at filter housing. Cauked the hole where the lines go through. Read more
Joins sections of your refrigerator's water line for the dispenser and ice maker. Replace when the original coupling is cracked, damaged, or leaking.
Fix error code 38 or washer won't fill with water. This diverter valve routes water between cycles. DIY repair restores normal operation quickly.
I replaced the door seal for the leak. We had a small tear in the sealing surface that resulted in water dripping down the front of the machine (just below the door). I also replaced the detergent dispenser main box with diverter unit. This corrected excessive water being left inside the detergent dispenser at the end of each cycle. I highly recommend replacing the dispenser seal and gasket nozzle to be on the safe side. As these parts are subject to wear and fatigue over the life of the... Read more