Vent Grille Parts

Please note: These are a dark grey replacing light grey

This cast cooktop grate supports cookware above gas burners, providing a stable cooking surface and directing heat where you need it. It replaces a worn, cracked, or misshapen grate to restore safe, even cooking performance. What it does:

• Supports pots and pans over a gas burner for stable cooking
• Helps direct flame and heat for consistent cooking results
• Replaces cracked, warped, or chipped grates that cause wobbling or uneven support
• Prevents cookware from making direct contact with burner heads

• Allow burners and grate to cool completely before handling.
• Lift old grate straight up; align new grate over burner and set into place—no tools typically required.
• Use caution: grates can be heavy and have sharp edges; wear gloves if needed.
• Do not modify the part; if fit or performance seems wrong, verify correct part number.

Replacement grommet that fits under a range grate foot to cushion and stabilize the grate, helping reduce noise and prevent scratching or shifting of the cooktop grate during use. What it does:

• Cushions and secures grate feet to stop rattling and unwanted movement.
• Helps protect the cooktop finish from scratching and wear where the grate contacts the surface.
• Can address noisy, loose, or rocking grates caused by worn or missing grommets.
• Restores proper grate alignment for safer, more stable cooking.

• Ensure the appliance is off and completely cool before starting any service.
• Lift the grate, remove the old grommet, and press the replacement onto the grate foot until fully seated.
• If multiple grommets show wear, replace matching feet for even support.

This cooktop grate kit replaces damaged or worn grates to restore stable, even support for pots and pans on a gas range. It helps maintain proper burner performance and keeps cookware level during cooking. What it does:

• Provides a sturdy surface for cookware so pots and pans sit flat and stable over burners
• Protects the cooktop surface from spills and direct flame contact
• Restores proper cookware alignment if existing grates are warped, chipped, or heavily worn
• Helps reduce wobble and improves cooking consistency when grates are compromised

• Turn burners off and allow the cooktop to cool completely before removing or installing grates
• Lift old grates straight up; install new grate pieces so they sit flush and stable over each burner
• No special tools typically required, but follow your range manual for any model-specific steps

This gas burner grate supports cookware on a gas cooktop, restoring stable, level support for safer, more consistent cooking. It replaces a cracked, warped or missing grate so pots and pans sit securely over the burner. What it does:

• Provides a stable surface for cookware so pans sit level over the flame.
• Helps maintain consistent heat contact for more even cooking.
• Replaces broken, chipped, warped or missing grates that cause wobbling or uneven heating.
• Designed to fit the designated cooktop burner location for correct alignment.

• Allow the cooktop to cool and turn all controls to OFF before replacing the grate.
• Remove the old grate and set the new grate into position—no tools are typically required.
• Inspect surrounding burner caps and ignitors; do not operate burners if any components are damaged.
• If you smell gas or suspect a leak, shut off the gas supply.

This replacement grate cartridge secures and centers a cooktop burner grate so cookware sits level and burners perform as intended. Durable design restores stable support for pots and pans on compatible gas ranges. What it does:

• Replaces a worn or broken grate cartridge that lets the grate rock or sit unevenly
• Helps keep the burner grate properly aligned over the burner for even cooking
• Prevents cookware from wobbling or shifting during use
• Restores proper fit where the grate attaches to the cooktop surface

• One grate assembly (cartridge) as shown

• Turn off and disconnect power and gas supply; allow the range to cool completely before servicing
• Remove the burner grate and lift out the old cartridge; align tabs and snap or seat the new cartridge into place
• Handle enamel-coated grates carefully to avoid chipping; use soft padding if needed during installation

A replacement lower front vent grill that restores finished appearance and directs refrigerator airflow for proper cooling. Fits into the cabinet front to protect internal components while keeping the vent path clear. What it does

• Covers and protects the refrigerator's lower vent area and internal components from debris.
• Directs airflow from condenser/evaporator area to help maintain proper cooling performance.
• Replaces cracked, broken, or loose trim that causes rattling or poor fit.
• Improves the appliance's exterior appearance when the original grill is damaged or discolored.

• Disconnect power to the appliance before starting any work.
• Typically installs by aligning tabs/clips and snapping into place; some models may use a few screws.
• Handle plastic parts gently to avoid breaking mounting tabs; use hand tools as needed.

This grill vent replaces the front vent grille that directs airflow and covers the oven/range vent opening for a clean appearance. It restores proper airflow routing and keeps debris out of the vent area. What it does:

• Covers and protects the appliance vent opening while directing exhaust airflow
• Helps prevent grease and food debris from entering internal vent passages
• Worn, cracked or missing vents can cause visible gaps, rattling or trapped odors
• Restores the appliance's finished appearance and helps maintain proper ventilation

• Disconnect power to the appliance before starting any repair
• Handle part carefully to avoid scratching the finish; a non-marring tool may be helpful
• Installation usually requires removing the lower access panel or front trim—keep fasteners organized

Qty: 1 (order quantity needed)

This cooktop grate assembly replaces a damaged or missing stove grate to restore a stable surface for pots and pans and ensure even cooking. Designed to sit over the burner area and support cookware during use. What it does:

• Supports cookware over the burner for safe, steady cooking
• Keeps pots and pans level to reduce tipping and spilling
• Restores proper clearance above burners for consistent flame pattern
• Replaces cracked, broken, warped, or missing grates that cause instability

• Allow the cooktop to be completely cool before replacing the grate
• Remove any old grate and set the new grate into position; ensure feet/locating tabs sit flush
• No special tools typically required; follow your appliance manual for model-specific guidance

This center cooktop grate replaces a damaged or missing center grate to restore stable support for cookware and proper burner coverage. It helps keep pots and pans level and protects the burner area for even cooking. What it does:

• Provides a stable, centered cooking surface over the cooktop burners
• Keeps cookware properly positioned for consistent heating and flame coverage
• Replaces cracked, chipped, or warped grates that cause wobbling or uneven cooking
• Helps prevent cookware from contacting the burner cap or igniter

• One center cooktop grate

• Ensure the range is completely cool and all controls are off before handling
• Remove the old grate by lifting straight up; set the new grate into place so it seats flat
• No tools are typically required; inspect for proper alignment before use
• Clean with mild detergent and avoid abrasive cleaners that can damage the finish

Color: Gray.

Replace a damaged or unsteady cooking surface with this burner grate. It supports pots and pans at the proper height above the burner, restoring stable, level support on your gas cooktop or range when the original grate is worn or broken.

• Provides sturdy support for cookware over the surface burner
• Maintains the correct clearance between burner and pan for consistent heating
• Replaces grates that are cracked, bent/warped, or have worn feet causing wobble
• Helps prevent rocking or instability of pots and pans during cooking

• Allow the cooktop/range and grate to cool completely before handling
• Lift off the old grate; clean the surface; align and place the new grate over the correct burner
• Ensure the grate sits flat and stable—do not force into place
• Refer to your owner's manual for care and cleaning recommendations

Color: Black

This grille assembly replaces a damaged or missing vent trim to restore a clean, finished appearance and help direct airflow. It snaps or screws into place for a secure fit and visible cosmetic repair. What it does:

• Covers and protects the vent/air opening while improving the appliance's appearance
• Helps channel airflow from the vent area for proper exhaust or intake
• Prevents large debris from entering the vent opening and interfering with components
• Fixes symptoms such as cracked, broken, loose, or missing front/vent trim

• Disconnect power to the appliance before attempting removal or installation.
• Most installations require removing a few screws or releasing retention clips; keep fasteners for reuse.
• Handle carefully to avoid scratching the finish; align tabs or screw holes before tightening.

This wok ring is a burner accessory that stabilizes round-bottom woks on gas range grates, letting you use wok-style cookware safely and maintain even heating. Durable design keeps cookware centered over the flame. What it does:

• Supports round-bottom woks and small, curved cookware on a gas burner
• Helps keep cookware stable to prevent tipping and uneven cooking
• Places the wok closer to the flame for improved heat contact
• Fits into the burner grate without tools for simple placement

• Install only on a compatible gas range grate; ensure the range is off and cool before placing the ring
• Position the ring securely in the grate recess so the wok sits level over the burner
• Inspect for cracks or warping; replace if damaged to avoid instability