Hook Parts

This locker hook secures the appliance door or access panel, restoring proper latching and preventing accidental openings. Durable molded construction matches original fit for reliable everyday use and quick replacement. What it does:

• Replaces a worn, broken, or missing door latch hook to restore secure closure
• Helps stop doors or panels from popping open during operation or transport
• Eliminates rattling or misalignment caused by a damaged hook
• Fits into the original mounting location to maintain factory fit and function

• One locker hook

• Basic hand tools typically required; disconnect power or unplug the appliance before starting
• Inspect surrounding trim and fasteners; replace any damaged screws or clips for proper fit
• Tighten fasteners securely but avoid overtightening plastic components

This replacement dryer door restores a secure, insulated seal and provides a finished front for your dryer. It replaces a damaged, dented or cracked door so the dryer closes properly and helps contain heat and lint. What it does

• Replaces damaged or warped dryer door that prevents proper closing
• Restores door seal to reduce heat loss and improve drying performance
• Helps prevent lint and debris from escaping the cabinet
• Provides a solid mounting surface for the door latch and hinge

• 1 dryer door

• Disconnect power (and gas supply if applicable) before starting work
• Handle glass and sheet-metal edges carefully to avoid cuts or breakage
• Some models require transferring the door latch, hinge or trim from the old door
• Use manufacturer screws/fasteners and follow model-specific instructions for correct alignment

This replacement door strike provides the solid catch point the latch/lock grabs so the appliance recognizes the door or lid is closed and can run safely. A worn, bent, or broken strike can interrupt operation. What it does

• Forms the fixed catch for the door/lid latch or lock
• Helps actuate the interlock/safety switch so a cycle can start
• Misalignment or damage can keep the door from latching and stop cycles
• Common symptoms: door/lid won't latch or stay closed, unit won't start, "Door/Lid" or "Lock" message, needing to hold the door shut, visible cracks or wear on the strike

• 1 strike

• Disconnect power to the appliance before servicing
• Open the door/lid and remove the mounting screws securing the old strike; retain hardware if it is reused
• Position the new strike in the same orientation and tighten screws snugly; avoid over-tightening to prevent damage
• Close and open the door/lid to confirm smooth latch engagement, then run a brief test cycle

Replacement lid lock for top-load washers. This 120V assembly secures the lid and reports its status to the control, restoring safe operation, proper spin speeds, and normal cycle progress when the original latch becomes intermittent or fails.

• Locks the lid during spin and agitation for user safety
• Detects lid position and sends closed/locked status to the control board
• Helps the washer reach and maintain proper spin speeds
• Common failure symptoms: lid won't lock/unlock; lid lock light flashing
• What's included: 1 lid lock assembly

• Disconnect power before servicing
• Access the lock at the top/front rim; remove fasteners and the connector, then swap the assembly
• Route wiring exactly as original and secure it to avoid pinching or chafing
• Verify lid strike alignment and run a short test cycle to confirm lock operation

The Dryer Door Latch Holder Lever Assembly is essential for maintaining the secure closure of your Samsung dryer door. Crafted as a genuine OEM part, this assembly ensures a perfect fit and reliable performance for your appliance. Its durable construction provides long-lasting support, preventing the door from remaining open or not closing properly, which can affect drying efficiency. Easy to install, this lever assembly allows you to quickly replace a faulty or damaged component, restoring your dryer's functionality without hassle. By choosing this genuine OEM part, you can trust in the quality and compatibility with a range of Samsung dryer models. Whether your original latch holder is worn out, broken, or not functioning as intended, the Dryer Door Latch Holder Lever Assembly delivers the dependable performance you need to keep your dryer operating smoothly and efficiently, enhancing the overall user experience and extending the lifespan of your appliance.

This grey reset pin is a small actuator used within an appliance assembly's reset mechanism. Replacing a worn, broken, or missing pin restores proper reset action so the related component can return to normal operation.

• Engages the assembly's reset function so the mechanism returns to its default position
• Maintains correct spacing/actuation travel between mating parts
• A worn, cracked, or missing pin can prevent the reset from engaging or releasing
• Common symptoms: mechanism won't reset, won't stay set, or requires extra force to operate

• Disconnect power (and shut off water supply if applicable) before servicing
• Access the assembly, note the pin's orientation, and fully seat the new pin
• Reassemble and test the reset function several times to ensure smooth operation

This door strike latch secures the refrigerator/freezer door by engaging the striker so the door stays closed and seals properly. It helps restore reliable door closure and can stop doors from popping open unexpectedly. What it does:

• Catches and holds the door closed so the gasket can seal
• Ensures the door engages the striker for consistent closing
• Can stop audible rattling or intermittent opening when the latch is worn
• Helps maintain proper door alignment for better temperature performance

• One door strike latch

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove any door trim or screws that block access to the latch assembly
• Replace the latch, align it with the striker, then tighten fasteners securely
• Test the door operation several times to ensure proper engagement and sealing

This replacement latch secures an appliance door or drawer by engaging its mating strike so it stays closed during use. Restoring a worn latch helps ensure reliable closure and proper operation when the control checks for a closed position. What it does:

• Mechanically holds the door/drawer shut by engaging the strike/catch
• Helps the appliance recognize a closed condition for starting or continuing a cycle
• Addresses issues where the door/drawer won't stay closed or pops open
• Common symptoms include "door open" messages or cycles that won't start

• 1 latch

• Disconnect power before servicing; turn off water supply if working on a washer
• Use basic hand tools to remove the old latch and transfer any reusable screws/clips
• Align the new latch with the strike/catch for smooth engagement
• Close and test the door/drawer several times before running a cycle

This door latch mechanism secures the appliance door and completes the door-switch circuit so the unit can operate. It replaces a worn or damaged latch to restore proper door closure and reliable operation. What it does:

• Engages and holds the door closed during cycles so the appliance can run.
• Activates the door switch/contact that signals the control board the door is closed.
• Commonly used when the door won't stay closed, the appliance won't start, or the latch feels loose or broken.
• Fits into the door frame and mates with the striker/handle to keep the seal tight.

• One door latch mechanism

• Disconnect power (unplug or switch off breaker) before servicing to avoid electrical shock.
• Access usually requires opening the door panel or removing the inner door; keep track of screws and clips.
• Handle carefully to avoid damaging the latch tabs or wiring; test door operation before reassembling fully.
• If wiring or mounting points are damaged, replace those parts as needed rather than forcing the latch.

This mechanical door latch secures the dishwasher door during operation so cycles can run safely and the unit can seal properly. It replaces a worn or broken latch to restore reliable door closure and cycle starts. What it does:

• Physically holds and locks the door closed during wash cycles
• Triggers or maintains the door-closed state so the control will allow the cycle to start
• Commonly replaces units that are cracked, bent, or no longer latching
• Resolves symptoms like a door that won't stay closed, a dishwasher that won't start, or intermittent cycle interruptions

• Disconnect power to the appliance before beginning any repair
• Remove the inner door panel to access the latch; keep fasteners organized
• Inspect surrounding strike and mounting tabs for damage before installing