Eb6301ww/Ss Parts

This oven door latch assembly is the locking mechanism that secures the door and reports lock status to the control. Replacing a worn latch restores reliable door locking and helps self-clean cycles operate correctly.

• Locks the oven door during Self Clean for safety and temperature containment
• Built-in switches signal locked/unlocked status to the control
• Direct replacement for a latch that is stuck, noisy, or fails to lock/unlock
• Can help with issues such as self-clean not starting/finishing, "door/lock" messages, or a door that won't stay locked

• Disconnect power at the breaker before servicing; allow the oven to cool completely
• Access location varies by model; removal of trim/control panel or pulling the oven may be required
• Move wiring one connector at a time to the new assembly; reuse existing hardware as needed
• After installation, verify smooth lock/unlock operation and check door alignment

Replace a burned-out oven light with this 120V, 15W bulb. It restores interior illumination so you can clearly monitor cooking progress through the window, helping maintain temperature and consistent results.

• Illuminates the oven cavity during preheat, baking, and broiling
• Direct replacement for a failed or dim bulb
• Helps you check food without opening the door
• Common signs of failure: light won't turn on, flickers, or filament appears broken

• Disconnect power to the appliance and allow the oven to cool completely before servicing.
• Remove the glass lens/cover to access the bulb; handle glass carefully.
• Install using a dry cloth or gloves; do not overtighten.
• Match the bulb's voltage and wattage to the original; never exceed the rated wattage.

This door latch bolt secures the oven door during use so it closes and locks reliably, helping the oven maintain temperature and operate safely. Fits the oven's upper or lower door latch assembly. What it does:

• Engages with the door catch to keep the door closed during cooking and self-clean cycles
• Helps prevent heat loss from the oven cavity when the door is properly latched
• Commonly replaced for symptoms like a door that won't stay fully closed, or a latch that feels loose or broken
• Works as the mechanical bolt component inside the latch mechanism

• High-level replacement only; remove power to the appliance before starting work
• Access typically requires removing the oven door or inner door panel—handle glass and trim carefully
• Use appropriate tools and follow OEM instructions or a service manual for reassembly

This is the inner door glass gasket that seals the space around an oven's inner door glass to help maintain proper heat containment and reduce heat loss. Replacing a worn gasket restores a tighter door seal and improves oven performance. What it does:

• Seals between the inner door glass and door frame to limit heat escape and drafts.
• Helps prevent cooking temperature fluctuations and uneven baking caused by a poor seal.
• Reduces hot air or steam from leaking into the cabinet area.
• Cushions and secures the inner glass to limit rattling or vibration.

• Disconnect power (and gas supply for gas ovens) before starting repair and allow oven to fully cool.
• Replacement typically requires removing the oven door and inner glass panel; handle glass carefully to avoid breakage and injury.
• Inspect door frame and mounting grooves for damage or debris and seat gasket fully into channel for a proper seal.

This door latch bolt secures a front-load washer door during operation to help the machine start and run safely. It restores the door's ability to lock and stay closed for normal wash cycles. What it does:

• Engages with the door strike to hold the door closed while the washer is running.
• Allows the machine to detect a secure door and begin the selected cycle.
• Helps prevent leaks and interrupts caused by an unlatched door.
• Commonly replaces worn, broken, or bent latch bolts that prevent proper door closure.

• Disconnect power and water before beginning any repair.
• Access typically requires opening the washer door trim or front panel; follow OEM disassembly instructions.
• Inspect surrounding strike and latch housing for damage; replace if necessary.

This temperature limiter is a safety thermostat that stops heat when temperatures exceed safe limits, protecting the appliance from overheating and potential damage. It's a direct-fit replacement designed for the original thermal cutoff function. What it does:

• Monitors heater temperature and opens circuit if the unit overheats
• Prevents continuous heating that can cause component damage or fire risk
• Common failure symptoms: appliance won't heat, intermittent heating, or tripped thermal safety
• Works as part of the heating/temperature-control safety chain

• Disconnect power (and gas if applicable) before access and replacement
• Located near the heating element or blower housing; follow your model's service manual for access
• Inspect wiring and adjacent components for heat damage; replace damaged parts as needed

This grease filter captures airborne grease from oven ventilation to help reduce buildup and keep internal parts cleaner. It fits flush in the oven vent and is a replaceable maintenance part. What it does:

• Traps cooking grease and airborne oils before they reach fan and ducting
• Helps reduce grease deposits that can cause smoke or odors during cooking
• Supports proper airflow by preventing clogging of the vent path
• Visible grease or darkened filter surface are common signs it needs replacement

• Disconnect power to the appliance before removing or installing the filter
• Slide or snap the filter into the vent slot per the appliance's filter-retention method
• Handle carefully to avoid sharp sheet-metal edges; wear gloves if needed
• Clean surrounding area and check the vent for heavy buildup when replacing

Restore smooth, controlled door movement and a tight oven seal with this door hinge. Replacing a worn hinge helps the door close fully, prevents heat loss, and brings back the original opening tension on top or bottom compartments.

• Controls door swing and spring tension for smooth opening/closing
• Maintains alignment so the door gasket seals evenly
• Helps the door stay closed during cooking and hold at designed positions
• Common symptoms: door won't close fully, drops/sags, uneven gap, squeaks/binds, or heat escaping

• Disconnect power at the breaker and allow the oven to cool completely
• Remove the door; support it to safely relieve hinge spring tension
• Note hinge orientation and attachment points; transfer and secure the hinge using existing mounting locations
• After reassembly, verify latch engagement and even gasket contact; many ovens use two hinges—replace in pairs if both show wear

This convection ring element supplies the heat for the oven's convection bake and roast cycles. Replacing a failed element restores even convection performance so foods cook properly across multiple racks.

• Provides the heat source for convection modes; the fan circulates air across this ring for uniform baking
• Common symptoms of failure: no heat in convection, very long preheat, or uneven results during convection cycles
• Visual clues include cracks, blistering, or burn-through on the element band
• Electrical clue: element tests open/infinite (OL) with a multimeter when power is disconnected

• Disconnect power at the breaker before servicing; this is a high-wattage circuit
• Access varies by model: remove the rear panel or the interior convection cover to reach the element and terminals
• Note wire locations and transfer leads to the new element one at a time
• Ensure the element sits flat and does not contact the cavity walls; tighten mounting screws snugly

This bottom hinge mounting bracket secures the door hinge to the cabinet, providing stable support and proper door alignment. Replacing a worn bracket helps restore smooth, even door movement and reliable closing.

• Supports and anchors the bottom door hinge to the appliance frame
• Helps correct door sagging, misalignment, or poor sealing
• Can reduce rubbing, squeaking, or uneven door movement
• Maintains proper door geometry for consistent operation

• Disconnect power and allow the unit to cool if working near a heated cavity
• Support the door before loosening hinge hardware to prevent strain or injury
• Transfer any screws or hardware from the original bracket if they are reusable
• Check door alignment and tighten all fasteners securely after installation