Fftr2045v8 Parts

The Condenser Fan Motor Blade is an OEM replacement part for Frigidaire refrigerators. This part attaches to the condenser fan motor and works by drawing air through the condenser coils and over the compressor, dissipating heat and allowing the refrigerant to cool effectively. 

Causes of damage to the Condenser Fan Motor Blade can include physical damage from moving or cleaning the refrigerator, obstruction from debris that impedes the blade's rotation, or wear and tear over time that can lead to cracks or the blade becoming loose.

Symptoms of a bad Condenser Fan Motor Blade include:

• The refrigerator running hotter than usual 
• Unusual noises coming from the back of the refrigerator where the condenser fan is located 
• The refrigerator compressor running for longer periods than normal or cycling on and off more frequently

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This full-width deli drawer spans the refrigerator's fresh-food compartment to store meats, cheeses, and snacks. Replace a cracked or missing bin to restore organized storage and smooth slide-in/slide-out operation.

• Provides a wide, slide-out storage bin across the fresh-food section
• Helps keep deli items and small packages contained and easy to access
• Replace if cracked, warped, tabs/rails are broken, or if it binds or won't slide smoothly
• Restores proper fit on existing tracks and cover, if equipped

• Disconnect power to the refrigerator for safety; clear the area of food items
• Pull the old drawer straight out; tilt to clear the tracks if needed
• Transfer any reusable trim or slides from the old bin, if applicable
• Align the new bin with the existing rails and slide in until fully seated

Color: Grey

The Gasket is an OEM part for Frigidaire refrigerators. It is designed to create a secure seal around the refrigerator or freezer door, maintaining the internal temperature and preventing warm air from entering.

Causes of a bad gasket can include general wear and tear, frequent door openings that stress the gasket, exposure to food spills or harsh cleaning chemicals, or damage from improper handling or accidental impact.

Symptoms of a bad gasket include:

• The refrigerator or freezer door not sealing properly
• Warm air entering the appliance, causing temperature fluctuations
• Increased frost or condensation buildup inside the unit
• Higher energy bills due to the appliance working harder to maintain temperature

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Fresh Food Door Gasket (Gray) is an OEM replacement part for Frigidaire refrigerators. As a critical component, this gasket forms an insulating seal around the refrigerator's fresh food door opening. It helps maintain interior temperatures and energy efficiency. 

Causes of a bad gasket can include cracks or splits developing from repeated opening and closing of the door. General wear through daily use may also cause seal degradation over time. 

Symptoms of a bad door gasket include: 

• Higher than normal energy bills   
• Excess frost or moisture buildup inside  
• Difficulty closing the refrigerator door fully
• Inability to reach optimal cooling levels

This OEM Frigidaire replacement is compatible with some Electrolux, Kelvinator, and Kenmore refrigerators as well.

The Evaporator Motor Fan Blade is an OEM replacement part for Frigidaire refrigerators. Located inside the refrigerator cavity, the evaporator fan motor and blades work together to circulate cold air throughout the interior. This circulation is crucial for maintaining consistent cooling performance.

Causes of a bad evaporator fan blade can include corrosion or buildup due to humidity, cracks or breaks from harsh vibrations during operation, or imbalance affecting the fan motor.

Symptoms of a bad evaporator fan blade include:

• Warm or lukewarm air inside the refrigerator or freezer sections
• Inconsistent temperatures
• The evaporator fan motor making noises or not spinning smoothly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models. 

The EVAPORATOR FAN MOTOR is an OEM part for Frigidaire refrigerators. It is an electric motor and blade assembly responsible for circulating air across the evaporator case and coils to aid even heat transfer and consistent temperature control. 

Causes of a bad fan motor can include bearing seizure from lack of lubrication, worn windings, or damage from falling debris.

Symptoms of a faulty evaporator fan motor include:  

• Fluctuating or inconsistent refrigerator temperatures
• Frost or ice buildup on evaporator coils or surrounding walls
• Abnormal refrigerator noises during the operation  
• The motor fails to turn on or spin at the proper speed

This OEM Frigidaire replacement fan motor features durable construction and precise electronics to reliably circulate air for efficient, quiet cooling. Replacing a malfunctioning motor helps maintain proper airflow and returns the refrigerator to balanced interior temperatures. 

Compatible with many top-mount, side-by-side, and French door models by brands like Electrolux, KitchenAid, and Kenmore.

The Defrost Timer is an OEM part for Frigidaire refrigerators. It regulates the automatic defrost cycle of the freezer, preventing the buildup of frost and ice on the evaporator coils.

A bad defrost timer can be caused by electrical issues, component failure, or malfunctioning mechanisms. When the timer becomes faulty, it can result in issues such as excessive frost buildup, poor cooling performance, or a constantly running compressor.

Symptoms of a bad defrost timer include:

• Frost or ice accumulation in the freezer
• Inadequate cooling in the refrigerator 
• Constantly running compressor 

Replace your faulty defrost timer with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Color: Black

The Door Gasket is an OEM part for Frigidaire refrigerators. It is designed to seal the refrigerator door tightly, preventing cold air from escaping and keeping the set temmperature inside the appliance.

A bad door gasket can be caused by wear and tear, damage, or improper cleaning. Signs of a faulty door gasket include a loose seal, condensation or frost buildup around the door, or difficulty in closing the door properly.

Symptoms of a bad door gasket can include:

• The refrigerator not maintaining its temperature.
• Excessive frost or condensation inside the refrigerator.
• A visible gap or uneven seal between the door and the cabinet.
• Difficulty in opening or closing the door.

Replace your worn or damaged door gasket with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Crisper Drawer is an OEM part for Frigidaire refrigerators. It provides humidity-controlled storage for fruits and vegetables in the refrigerator compartment. The crisper drawer sits on a set of smooth-gliding rollers for easy access.

Causes of a bad crisper drawer can include cracked or broken plastic, rollers that no longer function properly, or issues with the sealing gasket.

Symptoms of a bad crisper drawer include:

• Difficulty opening and closing the drawer
• Excess moisture or drying out of stored items
• Warping or discoloration of the plastic structure
• Inability to regulate humidity inside the drawer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The LED Light Bulb is an OEM part for Frigidaire refrigerators. It provides illumination inside the refrigerator and freezer compartments, making it easier to see and organize food items. This energy-efficient LED bulb ensures bright, long-lasting light with minimal energy consumption.

Causes of a bad LED light bulb can include electrical issues such as power surges, wear and tear over time, or damage due to impact or moisture exposure.

Symptoms of a bad LED Light Bulb include:

• The light not turning on
• Flickering or dim light
• Intermittent lighting issues
• Discoloration or reduced brightness

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement gasket restores a tight, flexible seal where your appliance needs it—helping contain air, moisture, or heat so performance stays consistent and leaks are minimized. Use it to replace a worn or damaged seal and improve efficiency.

• Forms a compressible seal between two mating surfaces
• Helps prevent air or water from escaping, supporting correct temperature and moisture control
• Replace if the old gasket is torn, cracked, hardened, misshapen, or won't stay seated
• Common symptoms include visible gaps, poor closure/fit, moisture at the edge, or temperature inconsistencies near the opening

• Disconnect power; turn off water supply if applicable
• Remove the old gasket and thoroughly clean the channel/mating surfaces before installing
• For door-style seals, warming the gasket (warm water or low heat) can help it relax; set corners first and seat evenly
• After installation, check for leaks or air gaps during a test run

The Start Device is an OEM part for Frigidaire refrigerators. It is responsible for initiating the electrical power to the compressor, enabling it to start functioning.

Causes tend to relate to standard wear over time. Moisture exposure can also impact durability.

Symptoms of a faulty start device can include:

• The compressor not starting or running intermittently
• Unusual clicking or buzzing sounds coming from the appliance
• Temperature fluctuations inside the refrigerator or freezer
• Complete loss of cooling or freezing capabilities
• Overheating of the compressor
• Burnt or damaged electrical connections near the start device

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

The Defrost Heater is an OEM part for Frigidaire refrigerators. It melts the ice buildup that occurs on the evaporator coils. The defrost heater is an element that generates warmth during scheduled defrost cycles, making sure the excess ice and frost are cleared away.

Causes of failure for a defrost heater may be related to cracked or broken heating filaments over many heating and cooling cycles. Natural wear and tear can weaken the heater structure.

Symptoms of a bad defrost heater include:

• Excessive ice or frost buildup inside fridge and freezer
• Inability of refrigerator to maintain set temperatures
• Frost or condensation appearing outside of refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Nylon

Color: Grey