Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Oven not reaching set temperature or won't turn off? The thermostat regulates oven heat. DIY repair typically takes 30-60 minutes with basic tools.
The repair was relatively simple and quick. The only part required was a new oven thermostat assembly and the tools I used for my model was a flathead screwdriver, cross-point screwdriver, torque bit and 1/4 inch socket using a bit driver. To complete the repair, I did the following: 1. Remove all top stove burner pieces and place to the side. Remove the 3 three screws (torque bit) in each of the 4 burner locations. That will allow the top lid to separate from the main unit later. 2. Pull... Read more
Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza! Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days. I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I... Read more
Replace worn, cracked, or missing bumpers on your range oven drawer. Cushions the drawer to prevent noise, vibration, and wear during regular use.
Looked for the parts at this site and ordered those need plus spares Read more
Burner won't ignite, leaks gas, or knob feels stiff? This surface burner valve controls gas flow to your cooktop burner. DIY repair in 5-10 minutes.
I fixed it myself. I and a little problem disengaging the ignighter switch attached to the control valve. I couldn't call for help as it was on a Sunday. Everything is working fine. Thank you for your concerne Read more
Replacement power cord for gas ranges. Connects your unit to the wall outlet. Replace if cord is worn, cut, heat-damaged, or causing burning smells.
I purchased a new power cord and installed it myself. Read more
Replacement orifice spud that threads into the cooktop surface burner holder to meter gas flow. Needed when converting fuel types or replacing worn parts.
We change Orifice from Natural to LP I have a question do I need to get special part for the oven ? Read more
Fix a gas oven that won't heat or preheats slowly. This glowbar igniter lights the burner when energized. Common DIY repair for no-heat issues.
If your gas range burners won't ignite or click constantly, this spark module generates the high-voltage pulses needed to light the burners reliably.
Replaced the spark module (2 + 0) Now it is working fine. Read more
Mounting screw for refrigerator doors, shelves, kickplates, and interior components. Replace missing, stripped, or corroded screws during repairs.
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Cast iron grate supports pots and pans above the burner flame. Replace yours if cracked, warped, or broken to restore a stable cooking surface.
Perfect fit with the replacement part. Read more
Replacement double burner assembly for gas range cooktops. Installs under the main top to route gas to two burner outlets. Replace if damaged or worn.
The flame is very low. What can I do. Read more
Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.
I replaced damaged burner bowls (drip pans), now my cooktop looks like new! Read more
Seals oven door to frame, preventing heat loss and air leaks. Replace when worn to restore preheat times and temperature stability. Verify fit with model.
Single speed nut fastener that provides threads for screws on appliances. Secures sheet-metal panels, brackets, or trim. Replace if missing or worn.
Secures the thermostat sensing bulb to the oven cavity wall for accurate temperature control. Replace if missing or damaged to prevent sagging bulb.
Replacement mounting screw for electric ranges. Secures panels, brackets, and trim to the appliance frame. Replace if missing, stripped, or rusted.