Lfid2459vf1a Parts

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain air, moisture, or fluid so the unit operates efficiently and reliably over time.

• Provides a compressible barrier between components to prevent escaping air or liquids
• Helps maintain proper performance when the original seal is worn or deformed
• Common symptoms include poor sealing, seepage around a joint, or visible cracks/flattening
• Replace if cut, brittle, misshapen, or no longer seats securely

• Disconnect power; shut off water or gas supply before servicing
• Note the seal's orientation and seating depth before removal
• Clean mating surfaces and grooves; avoid sharp tools that could damage the new seal
• Seat the new seal evenly all the way around; reassemble and test for a proper seal

The Pressure Switch is an OEM part for Frigidaire dishwashers. It plays a crucial role in monitoring water pressure inside the dishwasher, signaling the control module when to activate various components during the wash and rinse cycles. Overl or under pressure conditions could damage the dishwasher or prevent it from cleaning properly.

Symptoms of a bad pressure switch include: 

• Dishes not getting fully clean 
• Cycles not completing or getting stuck
• Error codes displaying
• Strange noises or leaks coming from the dishwasher

Causes of a bad pressure switch can be wear and tear over time, mineral buildup interfering with the switch's function or accidental damage from household chemicals or objects left in the dishwasher. 

This OEM Frigidaire replacement part is designed to function like the original part for reliable performance. It is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 
 

The Control Board is an OEM component specifically designed for Frigidaire dishwashers. It houses electronic components that direct machine operation through programmed cycles.

Causes of a faulty control board typically include failure of integrated circuits or microchips over time handling electrical signals. Damage from power surges is also possible. 

Symptoms of a bad control board include:

• No response to selector buttons  
• Inability to start or complete wash cycles
• Fault codes or blinking lights indicating errors  
• Intermittent or unusual mechanical behaviors

This OEM part fits Electrolux, Gibson and Kenmore models as well.

This drain pump assembly removes water from the appliance's tub so cycles can complete and clothes/dishes can drain properly. A direct-fit replacement that restores normal draining and pump operation when the original pump fails. What it does:

• Pumps drain water out of the tub so the appliance can advance through wash/drain cycles
• Commonly needed when the appliance won't drain, stops mid-cycle, or displays drain-related error codes
• Replaces a worn, noisy, or non-spinning pump to reduce leaks and restore flow
• Works as the motorized pump assembly that moves water from the tub to the drain hose

• One drain pump assembly

• Disconnect power and water before beginning any repair to avoid shock or flooding
• Inspect hoses and clamps while replacing the pump; replace any damaged hoses or seals
• Some models require removal of access panels or the tub to reach the pump

This dishwasher hose routes water between internal components to support proper wash and drain performance. Replacing a cracked or leaking hose helps prevent water damage and restores reliable water flow inside the machine. What it does:

• Carries water between internal components during wash and drain cycles
• Helps maintain a watertight path to prevent leaks inside the cabinet
• A damaged hose can lead to puddles under the unit, water in the base pan, or reduced wash/drain performance
• Visible splits, pinholes, soft spots, or kinks are signs the hose needs replacement

• 1 hose

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward for access and place towels to catch residual water
• Transfer/reuse existing clamps or replace if worn; ensure secure, leak-free connections
• Route the hose without kinks and run a short test cycle to check for leaks

This Rack Roller is an OEM part for Frigidaire dishwashers. It is an essential component for the smooth and stable movement of the dishwasher rack. 

Rack rollers can wear down or become damaged due to regular use, excessive load, or general wear and tear. A malfunctioning rack roller can make it difficult to slide the rack in and out, and may even cause the rack to become misaligned or unstable.

Symptoms of a failing rack roller in a dishwasher include:

• Difficulty in sliding the dishwasher rack in and out.
• A wobbly or unstable rack during movement.
• Unusual noises, such as scraping or squeaking, when the rack is moved.
• Visible wear or damage on the rollers.
• The rack getting stuck or not sitting properly in the dishwasher.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Drain Filter is an OEM component specifically designed for Frigidaire dishwashers. It is designed to trap food particles and debris from exiting the dishwasher and entering plumbing drains.

Causes of failure usually stem from normal wear and potential mineral deposits reducing pore size over many years of use. Hard water areas present additional stress. 

Symptoms of a clogged or ineffective drain filter include:  

• Slow or incomplete draining after cycles
• Gurgling noises from drain line blockages
• Potential plumbing backups and repairs from unfiltered waste

This OEM part fits Electrolux, Gibson and Kenmore models as well.

The Door Lock is an OEM part for Frigidaire dishwashers. As a basic safety component, it secures the dishwasher door firmly closed during active wash cycles. Trapping steam and heat within the tub area is crucial for sanitizing soils and delivering clean dishes.

Symptoms of a faulty door lock include:

• Inability to fully latch or lock the dishwasher door closed  
• Accidental opening of the door during washing interruptions
• Possible leaks or loss of heat from unsealed door cracks
• Partial or incomplete cleaning cycles 

Causes of a failed lock can be wear over extended use, or damage to the locking latch or striker plate. Warped or misaligned doors also put undue stress on the lock mechanism.

Replacing with this genuine Frigidaire part restores secure closure and safe operation. It is also compatible with some Kenmore, Gibson, and Admiral branded dishwasher models. Proper door locking is essential for optimal washing performance.
 

This switch assembly restores electrical on/off control for a specific appliance function. Replace a worn or failed switch to stop intermittent operation and return reliable control to the affected circuit. What it does:

• Provides the electrical on/off or function control for the appliance circuit.
• Replaces a failed switch that can cause intermittent operation or unresponsive controls.
• Helps resolve symptoms such as a function that won't start, no response from the control, or erratic switching.
• Connects to the existing wiring harness and mates with the original mounting points.

• Disconnect power to the appliance before beginning any work.
• Remove the appropriate access panel to reach the switch; note wire and terminal locations before disconnecting.
• Unplug the wiring harness or carefully detach terminals, swap the switch assembly, then reconnect securely.
• Restore power and verify the replaced switch operates the function correctly.

The Rack Stop is an OEM part for Frigidaire dishwashers. It serves an important purpose by preventing loaded dishes from shifting forward during wash cycles.

Causes of a bad rack stop can include wear and tear from regularly loading and unloading dishes, as well as minor impacts that cause cracks or breaks. Over time, the mounting screws may also loosen.

Symptoms of a bad rack stop include:

• Dishes shifting forward during wash cycles
• Gaps appearing around the dish rack where dishes are not fully secured
• Noise from dishes banging together or rattling around more than usual
• Potential damage to more delicate dishware

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement sensor assembly that detects appliance operating conditions and sends readings to the control system for proper operation. Installing a working sensor restores reliable feedback and helps resolve related error codes or inconsistent performance. What it does:

• Detects operating conditions and provides electrical feedback to the appliance control.
• Enables the control board to monitor and adjust cycles based on measured readings.
• Faulty or intermittent sensors can cause incorrect readings, error codes, or unstable/incorrect appliance operation.
• Replacing a failed sensor restores accurate sensing and helps return the appliance to normal function.

• Always disconnect power to the appliance before starting work to avoid shock or injury.
• Handle the sensor and wiring gently; avoid pulling on wires or bending sensor probes sharply.
• Ensure connectors are fully seated and routed clear of moving parts or heat sources.
• After installation, restore power and verify proper operation and that any previous error codes are cleared.

This flexible hose routes water between internal components, helping maintain proper flow and leak-free operation. Replacing a worn or cracked hose restores reliable performance and helps prevent water damage inside or beneath the appliance. What it does

• Carries water between components for filling, circulation, or draining
• Maintains a sealed path to prevent leaks when intact
• Deterioration (cracks, hardness) or kinks can restrict flow
• Common symptoms: water leaking, standing water, slow/no drain or fill, moisture odors

• Includes: 1 hose

• Disconnect power and turn off water supply before service
• Place towels or a pan to catch residual water during removal
• Note the original routing and transfer any clamps/seals; replace if worn
• Push hose fully onto fittings, route to avoid kinks, and test for leaks after reassembly

Color: Black

Flapper seals the appliance drain/valve to prevent leaks and ensure proper water flow. Replacing a worn or damaged flapper restores reliable sealing, reduces dripping, and helps the appliance drain correctly. What it does:

• Seals the drain/valve opening to stop water leaks
• Opens and closes to allow normal draining during cycles
• Restores a watertight seal when the original flapper is cracked, torn, or warped
• Can resolve slow draining, intermittent leaks, or pooling at the base

• Disconnect power and shut off the water supply before starting any repair
• Handle the part carefully; avoid stretching or nicking sealing surfaces
• Clean the mating surfaces and follow the appliance's service manual for removal/installation

This electronic control board manages and coordinates refrigerator functions so controls, defrost, and cooling cycles respond correctly—restoring normal operation when the original control fails. What it does

• Receives user inputs and operates the compressor, fans, and defrost based on sensor signals
• Controls temperature settings and cycle timing to maintain cooling performance
• Can stop display, lights, or cooling response when the control is defective
• May prevent the unit from starting or cause intermittent operation if faulty

• One electronic control board

• Disconnect power to the appliance before removing or installing the control to avoid shock
• Handle the board carefully; avoid static discharge and exposure to moisture
• Verify this part number matches the control on your appliance before ordering