Eh5026719 Parts

This electronic service controller board manages core cycle functions and diagnostics for the appliance's control system, restoring responsive controls and helping the unit run intended programs reliably. What it does:

• Acts as the appliance's control module, sending and receiving signals to start and stop cycles
• Interprets user inputs and communicates with sensors and actuators
• Helps clear or report control-related error conditions and diagnostic codes
• Stops operation or prevents certain functions when control faults occur

• One electronic service controller board

• Disconnect power before servicing to avoid shock or damage
• Handle the board by edges and avoid touching components; use ESD protection if available
• Ensure connectors are fully seated and securely fastened; verify wire harness orientation before reassembly
• Follow the appliance service manual for any calibration or diagnostic steps after installation

A replacement service trim lamp assembly that restores interior lighting so you can safely see and use the appliance during operation and maintenance. Fits the listed part number and ships as a single lamp assembly. What it does:

• Provides interior/trim lighting where factory trim lamps are used
• Replaces a burned-out, dim, or flickering lamp to restore usable illumination
• Helps when the light does not turn on or only works intermittently
• Intended for service/repair use in compatible appliances

• Always disconnect power to the appliance before beginning any repair
• Allow the appliance and existing lamp to cool before handling
• Use basic hand tools and handle the lamp carefully to avoid breaking the bulb or touching glass with bare hands

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

A single service screw used to secure appliance components such as control boards, brackets, and panels. Replaces worn or missing fasteners to restore proper fit and stop parts from shifting. What it does:

• Secures internal components and mounting brackets to prevent movement and vibration
• Holds control boards, panels, or housings in place for reliable operation
• Helps prevent loose parts that can cause rattling or intermittent contact
• Small, OEM-style fastener sized for precision appliance assemblies

• One service screw

• Disconnect power to the appliance before servicing
• Use the correct screwdriver to avoid stripping the head
• Do not overtighten; snug to manufacturer torque or until secure
• Keep removed screws organized to ensure all are returned during reassembly

The 75W Halogen Bulb for Edger is designed to deliver powerful and reliable lighting for your Samsung edger. This genuine OEM part ensures a perfect fit and optimal performance, maintaining the high standards you expect from your appliance. With its 75-watt halogen technology, the bulb provides bright and consistent illumination, making your edging tasks easier and more precise. The durable construction of this halogen lamp ensures long-lasting use, reducing the need for frequent replacements and saving you time and money. Installing the 75W Halogen Bulb for Edger is straightforward, allowing you to quickly restore your edgerGÇÖs functionality without any hassle. By choosing this genuine OEM part, you benefit from enhanced visibility and efficient energy use, ensuring your Samsung edger operates at peak performance. Whether you need to replace a burnt-out bulb or upgrade your current lighting, this halogen lamp offers the reliability and quality you need for a superior customer experience.

Replacement service filter that restores correct filtration/airflow during maintenance or repairs. Designed for use as the factory service filter to help maintain performance and reduce debris-related issues in compatible Samsung appliances. What it does:

• Captures debris and particulates to protect internal components and air/water passages.
• Helps reduce airflow restriction that can cause reduced performance or extended cycle times.
• Can address symptoms like unusual noises, error codes tied to blockage, or visible filter damage.
• Keeps systems cleaner between scheduled service intervals when installed per OEM guidance.

• Disconnect power (and water if applicable) before accessing the service area.
• Replace with the filter oriented and seated per the appliance's service manual.
• Inspect the housing and seals for damage; replace any worn parts before reassembly.

This membrane switch panel is the touch keypad assembly for the oven/microwave control console, restoring responsive button control and reliable user input for cook functions and settings. Designed as a direct-fit control interface replacement. What it does:

• Provides the user interface for selecting cook modes, time, and power settings
• Replaces a worn, cracked, or unresponsive touch keypad
• Fixes symptoms like buttons that don't register presses, intermittent button operation, or sticky/unresponsive keys
• Restores normal control-panel functionality without replacing the entire console

• Disconnect power to the appliance before beginning any repair
• Remove control housing or overlay to access and replace the membrane panel; handle gently to avoid tearing
• Ensure connector(s) are fully seated and routed clear of moving parts before reassembly

This service bushing protects and cushions appliance wiring where it passes through metal panels, helping prevent chafing and shorts. It's a simple replacement that restores proper routing and insulation for harness wires. What it does:

• Cushions wiring at panel openings to reduce abrasion and wear
• Keeps wiring properly routed to prevent pinching or intermittent connections
• Helps stop rattling or vibration where wires contact metal edges
• Addresses symptoms like exposed or frayed insulation, burning smell, or intermittent power related to damaged panel wiring

• One service bushing

• Disconnect power before starting any repair
• Remove the access panel or trim to reach the damaged bushing location
• Press the bushing into the panel hole until fully seated; replace wiring through the bushing as routed originally
• Inspect surrounding wiring and replace any frayed or heat-damaged sections; reassemble panels securely

This shutter assembly restores proper airflow control for the evaporator/defrost fan area, helping maintain even cooling and preventing drafts inside the compartment. Designed to replace a damaged or broken shutter that interferes fan airflow. What it does:

• Directs and controls airflow from the evaporator fan to the freezer/refrigerator compartments
• Helps prevent fan obstruction and rubbing that can cause noise
• Reduces uneven cooling caused by a cracked or misaligned shutter
• Supports correct airflow during defrost and normal cooling cycles

• Disconnect power to the appliance before beginning any repair
• Access typically requires removing the evaporator cover/panel; retain fasteners for reassembly
• Handle plastic tabs and mounting points gently to avoid breakage

This lamp holder is the replacement socket that secures and powers an interior appliance light bulb, restoring reliable illumination so you can see inside the appliance for loading, cleaning, and inspection. What it does

• Holds and connects the interior lamp to the appliance wiring so the bulb receives power
• Replaces a cracked, burned, or loose socket that causes the light to flicker or not turn on
• Provides the mounting and electrical contact for standard appliance interior bulbs
• Helps restore safe, visible interior lighting for troubleshooting and normal use

• Disconnect power (unplug or turn off circuit breaker) before starting; work on energized circuits can cause injury.
• Handle bulbs and the socket carefully to avoid breakage; wear gloves and eye protection as needed.
• Check that the replacement part matches your existing socket before installation; do not force connections.

This service end cap is a chrome-finish replacement trim piece that restores the appliance's finished appearance and protects the exposed end of the control/trim area from dirt and damage. It matches OEM fit and finish for a seamless repair. What it does:

• Covers and protects the exposed end of the control/trim assembly to prevent dirt, moisture, and wear
• Restores the appliance's original appearance where the end cap is cracked, scratched, or missing
• Helps maintain a secure edge on the control/trim area for proper alignment
• Simple cosmetic replacement to improve appearance after panel or control repairs

• One chrome-finish service end cap

• Disconnect power to the appliance before starting any work
• Installation typically involves removing adjacent trim or a few fasteners; handle trim pieces gently to avoid damage
• Align tabs and clips, then press or fasten the end cap into place without forcing