Swnsx2p115ytw02 Parts

This dual water inlet mixing valve controls and blends the hot and cold supply during the fill cycle. Replacing a failing valve restores proper fill rate and water temperature selection for consistent wash performance.

• Opens and closes to admit hot and cold water as directed by the control, creating the selected temperature
• Helps maintain proper flow to the tub/dispenser during fill
• Common failure symptoms: no fill or slow fill, incorrect water temperature during fill, water continuing to drip or flow into the tub when the machine is off, or leaks from the valve body
• Humming from the valve with little or no water flow due to internal failure or clogged screens

• Disconnect power and shut off both water supplies before servicing; relieve line pressure
• Place towels, disconnect hoses, and note hot/cold orientation; inspect/clean inlet screens
• Transfer any brackets/fittings from the old valve if required; connect hoses securely without overtightening
• Turn water back on, check for leaks, then run a fill test to verify operation

The Drain Pump is an OEM part for Speedqueen brand washing machines. Located near the rear of the washer tub, the drain pump works to empty water from the machine at the end of each cycle. It functions through an electrical motor that activates a spinning impeller, forcing water through the drain hose. 

Symptoms of a bad drain pump include:

• Washer fails to fully drain or leaves standing water 
• Drain cycle takes an unusually long time to complete
• Loud grinding or rattling sounds coming from inside

Over time, a buildup of lint or mineral deposits inside the pump chamber can clog the impeller and reduce efficiency. Allowing water to sit for extended periods also promotes mold growth. Replace your drain pump today with this genuine Speedqueen part and restore full draining capability.
 

This push button switch mounts in the appliance's control panel and sends an electrical signal to the control when pressed. Replace a worn or sticking switch to restore dependable button response and function activation. What it does:

• Panel-mounted switch that closes its contacts when pressed to signal the control
• Restores reliable front-panel input for starting or selecting a function
• Helps address no response or intermittent response when the button is pressed
• Replaces switches with loose action, sticking, or heat-discolored/burned terminals

• 1 push button switch

• Disconnect power before servicing to avoid electrical shock
• Access the console/control panel to reach the switch
• Note wire positions (take a photo) and transfer connectors one at a time; ensure firm, fully seated terminals
• Secure the switch in the panel (nut/clip as applicable), verify button action, then reassemble and test

This drive belt powers the washer's agitate and spin cycles by linking the motor to the drive system. Replacing a worn or stretched belt can restore reliable tub/agitator movement and reduce slippage noise during operation.

• Transfers motor rotation to the transmission/drive to turn the agitator and spin the tub
• Common symptoms include no agitation or no spin
• Squealing or burning-rubber smell from belt slippage
• Tub/agitator turns slowly or intermittently
• Visible belt cracks, glazing, or fraying

• Unplug the washer; turn off water supply if you need to move the unit
• Access the belt from the lower front or underside; remove the front panel or carefully tilt the cabinet as your model allows
• Note belt routing around the motor and drive pulleys before removal; take a photo for reference
• After installing, hand-rotate the pulleys to check tracking, then reassemble and test

Note: DO NOT use any sealant other than 200996P Sealant.

This idler pulley wheel keeps the drive belt aligned and under constant tension so the drive system runs smoothly and quietly. Replacing a worn wheel helps eliminate belt squeal and prevents premature belt wear or slippage.

• Maintains proper belt tension on the idler arm and guides the belt during operation
• Provides low-friction rotation for smooth belt tracking
• Common symptoms of a worn wheel: squealing/squeaking, frayed or glazed belt, belt slipping off, or intermittent/no drive
• Helps restore reliable belt traction and reduce noise

• Disconnect power and wear work gloves before servicing
• Access the drive system and note the belt routing for reassembly
• Release belt tension, remove retaining hardware, swap the wheel on the idler arm, and re-tension the belt
• Spin the new wheel by hand to inspect belt and idler arm/spring and replace if worn

This upper and lower bearing set supports the rotating shaft assembly, helping it turn smoothly and quietly. Replacing worn bearings reduces noise and vibration and protects adjacent components from accelerated wear. What it does:

• Provides radial support so the shaft/drum rotates freely with minimal friction
• Worn bearings can cause rumbling, squealing, or grinding during operation
• Can show play at the shaft or metallic dust near the bearing area

What's included:

• 1 bearing

Install notes:

• Disconnect power and shut off water/gas before servicing
• Access the bearing housing; use a press or proper driver to remove/install bearings—do not strike the races
• Note bearing orientation and seating depth; install squarely and fully
• Inspect the shaft and any related seals/housings and replace if worn or damaged

This replacement kit refreshes a worn belt-tension setup. It pairs a new idler lever with a new drive belt to restore proper belt routing and tension for smooth, reliable rotation and quieter operation.

• Maintains correct tension and routing of the drive belt in the appliance's drive system
• Helps prevent belt slip, squealing/chirping noises, and premature belt wear
• Can resolve issues such as no or intermittent drum/tub rotation
• Reduces burning rubber odors caused by a slipping or misrouted belt

• Disconnect power and allow the appliance to cool before servicing
• Access the drive system per your model's service procedure
• Release belt tension at the idler, remove the old parts, and install the new lever and belt with the correct routing
• Hand-rotate the system to ensure tracking and clearances before reassembly and testing

Use this drain extension kit to extend your washer's drain hose so it reaches the standpipe or laundry sink. It provides a secure, routed connection that supports proper draining and helps prevent leaks from overstretched or improvised hookups.

• Extends the existing drain hose length for installations where the standpipe or laundry tub is farther away
• Supports correct hose routing and drain height to help prevent kinks and siphoning
• Provides a more secure connection versus improvised extensions or overstretched hoses
• Common symptoms: hose won't reach the drain, drips at the drain connection, or water on the floor near the drain line

• Unplug the washer and turn off water; have towels or a shallow pan ready for residual water
• Attach the extension per manufacturer instructions; route the hose without kinks or sharp bends
• Maintain the standpipe height and air gap specified in your user manual; do not seal the hose into the drain opening
• Secure all connections and run a quick fill/drain test while checking every joint for leaks

A 10 oz cartridge of OEM-specified sealant used to reseal washer assemblies. It forms a flexible, watertight bead to help stop leaks and restore proper sealing around tubs, boots and related joints. What it does:

• Seals gaps and joints around tubs, door boots and panel seams to reduce water leaks
• Bonds to typical appliance surfaces (metal, rubber, many plastics) for a durable seal
• Helps prevent moisture intrusion that can lead to corrosion or interior water damage
• Supplied to OEM specification for correct form and performance in appliance repairs

• Remove old sealant and thoroughly clean and dry surfaces before applying
• Cut nozzle to size and apply an even bead; smooth with a tool or gloved finger for best contact
• Use gloves and eye protection; work in a well-ventilated area and follow label safety directions
• Allow the sealant to fully cure per the manufacturer's instructions before returning the appliance to service

This coin drop mounts in the machine's coin area to accept and detect U.S. quarters, then signal a credit to start a cycle. Replace it if valid coins are rejected, credits don't register, or vending is intermittent.

• Accepts U.S. 25-cent coins and sends a credit signal to the control
• Guides the coin into the collection path/box after acceptance
• Helps resolve issues like valid quarters not accepted or credits not registering
• Symptoms can include intermittent crediting or machine not starting after inserting coins

• Disconnect power before servicing
• Access the coin/control area and note wiring and mounting orientation
• Move any reusable screws or bezels as needed; install the new drop securely
• Reconnect wiring and test operation with several quarters before returning to service

The Drain Pump is an OEM component for Speed Queen washing machines. It is an important electric part that works to remove water from the washer tub at the end of each cycle. 

Symptoms of a failing drain pump include:

• The washer not fully draining water after cycles
• Excessively long drain times
• Unusual noises coming from the pump area

Causes stem from blockages in the pump chamber or drain hose, worn impeller assembly, or damaged electrical components inhibiting proper operation.

This Speed Queen replacement pump restores the machine's essential draining ability for hygienic washing. It ensures the removal of all water to prevent residual moisture issues. 

This switch knob fits onto the control switch shaft so you can select settings and operate the machine. Replacing a cracked, stripped, or missing knob restores smooth, reliable control and keeps daily use straightforward. What it does:

• Fits over the control switch shaft to turn the switch and choose settings
• Restores a secure grip and clear position when selecting options
• Helps resolve issues like slipping when turning or a knob that won't stay attached
• Common symptoms: cracked knob, stripped insert, loose or missing knob, difficulty selecting settings

• 1 switch knob

• Disconnect power before servicing
• Pull the old knob straight off; remove any retaining clip or set screw if present and save it
• Align the flat/D-shaft orientation and press the new knob fully onto the switch shaft
• Test the switch through all positions to confirm proper engagement

This small sealing washer fits the washer's water pressure assembly to help maintain a proper watertight seal at the pressure/valve connection. Replacing a worn washer reduces leaks and helps the fill/pressure system operate as intended. What it does

• Provides a watertight seal at the water pressure/valve connection to prevent leaks.
• Helps maintain correct pressure feedback to the washer's water control system.
• Wear or damage can allow leaking at the valve or inconsistent fill behavior.
• Simple, low-cost part commonly replaced when troubleshooting valve leaks.

• Turn off household water supply and unplug the washer before replacing.
• Remove the valve/pressure fitting carefully and replace the old washer with the new one, making sure it seats flat and undamaged.
• Inspect mating surfaces for debris or damage; clean before reassembly.
• If leaks or fill issues persist after replacement, inspect related seals, fittings, and the pressure switch/valve assembly.

This control assembly is the electronic console that manages wash cycles and user inputs, restoring normal cycle selection and display functions on commercial top-load washers. It replaces a damaged or unresponsive console to regain reliable control. What it does

• Interprets button/knob inputs and starts selected wash cycles
• Sends signals to motors, valves, and timers so the washer runs chosen programs
• Can stop unresponsive controls, blank displays, or failures to start when faulty
• May resolve error codes or cycle interruptions caused by a bad console

• One control assembly (electronic console)

• Disconnect power to the washer before servicing to avoid shock or damage
• Handle the printed circuit board and connectors carefully; avoid touching contacts
• Refer to the washer's tech sheet/service manual for correct connector routing and mounting

This DPST rocker switch controls two circuits with a single actuator, restoring reliable on/off operation for affected controls. It replaces a worn or broken rocker switch to get your appliance responding to user input again. What it does:

• Opens and closes two independent circuits simultaneously (double pole, single throw) with an Off-(On) rocker action
• Commonly used for power or function control on laundry equipment control panels
• Symptoms it can fix: unresponsive or intermittent control activation, loose or cracked rocker actuator, or complete loss of switch function
• Designed to match OEM form and function for direct replacement on compatible control assemblies

• One rocker switch (DPST Off-(On)) as shown

• Always disconnect power to the appliance before accessing controls to avoid shock hazard
• Removal typically requires opening the control panel or bezel; keep track of mounting hardware and orientation
• Verify terminal arrangement and wiring match before final installation; use proper connectors and secure connections