Gg30 Parts

This is a cooktop burner igniter OEM replacement part for Bosch cooktops and ranges and is sold as an individual part. This part creates a spark that ignites the burner within your cooktop or stovetop and is made of a combination of metal and ceramic.

Causes of a bad ignition plug can include issues with the electronic module, worn electrodes that no longer spark reliably, or damaged wiring.

Symptoms of a bad ignition plug include:

• Gas burners that will not light or remain lit
• Delayed ignition of one or more burners
• Intermittent or no sparking from the ignition plug

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.

The Spark Module is an OEM part Bosch ranges and cooktops. This electronic part generates the high-voltage spark needed to reliably ignite the gas burners with the push of a button.

Causes can be issues like component failure over the thousands of ignitions it facilitates. Water ingress could also potentially cause problems. 

Symptoms of a bad spark module include:

• Unreliable or intermittent burner ignition requiring multiple ignition button presses
• One or more burners that will not ignite at all
• Occasionally flashing or error codes relating to ignition issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Color: metallic. Measures about 13-1/2 inches wide by 5 inches high.

The Grease Filter is an OEM part for Bosch ranges and cooktops. It is responsible for capturing and containing grease, oils, and other vapors produced from cooking to help keep indoor air fresh and prevent buildup. Regular cleaning is important to maintain optimal performance.

Causes of a bad grease filter can include excess buildup that blocks airflow from frequent high-heat cooking. Exposure to flames or excessive heat may cause damage over time as well.

Symptoms of a bad grease filter include:

• Reduced suction power and airflow from the range hood
• Grease accumulation on surrounding surfaces below the hood
• Unpleasant cooking odors escaping into the kitchen rather than being vented outside

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

Ignition device creates the spark that lights gas burners on compatible Bosch gas ranges and cooktops. Replacing a worn or faulty ignition device restores reliable ignition and reduces burner-start failures. What it does:

• Generates the high-voltage spark used to ignite gas at the burner
• Replaces a unit that causes clicking without ignition or burners that won't light
• Supports reliable ignition timing for proper burner start-up
• Works as the primary spark source for the cooktop's gas ignition system

• Disconnect electrical power and shut off the gas supply before starting work
• Handle ceramic electrodes and connectors carefully to avoid damage
• Basic hand tools are typically required; wiring plugs into the existing harness

This plastic drain valve controls water flow from the appliance, allowing proper draining during normal operation and service. It restores reliable drainage and helps prevent standing water or backups in the drain path. What it does:

• Opens and closes the drain path to release water when commanded by the appliance controls
• Directly addresses symptoms such as slow or no draining, water remaining in the tub, or intermittent drain operation
• Replaces cracked or worn valve bodies that can cause leaks or poor sealing
• Works with the appliance's existing hoses and mounting points to restore proper drain function

• Replace with power disconnected and water supply turned off; follow the appliance manufacturer's service instructions
• Inspect surrounding hoses and seals for wear and replace if needed to ensure a watertight connection
• Tighten fittings to manufacturer torque specs; avoid overtightening plastic threads

A locknut that secures threaded shafts and fasteners in appliances to resist loosening from vibration and maintain stable component alignment. Replacing a damaged or stripped locknut restores a secure fastening and reduces rattling or movement. What it does:

• Keeps nuts and components locked on threaded shafts to prevent backing off under vibration.
• Commonly used where a retained fastener is required on motors, pumps, or moving assemblies.
• Replace if you notice loose parts, persistent rattling, or visible thread damage.
• Restores proper fastening to help prevent premature wear or component misalignment.

• Disconnect power (and water/gas if applicable) before servicing the appliance.
• Use the correct size socket or wrench and hold the mating component to avoid over-torquing.
• Inspect mating threads and replace any damaged hardware to ensure a secure fit.

This gas control valve with attached thermistor regulates gas flow and provides temperature sensing for safe burner operation. It replaces a failed valve assembly to restore reliable ignition and proper burner control in compatible gas ranges. What it does:

• Controls and meters gas to the burner based on oven/stove commands
• Thermistor monitors temperature or flame-sensing circuits for safe operation
• Commonly used when the oven/stove won't ignite, won't hold flame, or shows inconsistent heating
• Works as the factory valve assembly that interfaces with the appliance's control electronics

• Disconnect power and shut off gas supply before starting any service
• Installation requires basic appliance wiring and gas line experience; use approved fittings and leak-test per local codes
• Do not modify the part; install only in appliances approved for this valve

This door thermistor is a replacement temperature sensor that monitors the interior door area so the refrigerator control can maintain proper cooling. It restores accurate temperature readings to help stabilize fridge performance. What it does:

• Senses temperature at the refrigerator door and sends the reading to the control board
• Helps the control adjust cooling cycles to maintain set temperatures
• Stops false temperature alerts or error codes caused by a failed door sensor
• Common symptom: erratic or incorrect temperature display, improper cooling, or occasional defrost/control errors

• One door thermistor sensor (single sensor only)

• Disconnect power to the appliance before starting any work
• Replace the sensor carefully; avoid damaging the thin sensor tip and wiring
• Secure wiring to prevent pinching when reassembling
• Test the new thermistor per OEM resistance/diagnostic procedures before final reassembly