Wa37t26gw2 Parts

The Drain Pump and Fuse Assembly is an OEM part for Fisher & Paykel washing machines. This assembly combines the drain pump, responsible for removing water from the washer tub, with a fuse component that provides electrical protection.

Causes of a faulty drain pump and fuse assembly can include pump impeller damage or blockages, worn bearings or seals in the pump, electrical faults triggering the fuse, or general wear over time.

Symptoms of a bad drain pump and fuse assembly include:

• Water not draining properly from the washer tub
• Leaking or overflow issues during the drain cycle
• Failure of the washer to advance to the next cycle

This top-load washer agitator is the central post that moves clothes through the wash water. Replacing a worn or broken agitator restores proper wash action and can help resolve weak agitation, wobbling, or unusual noises during the wash cycle.

• Provides the back-and-forth motion that circulates laundry during the wash cycle
• Helps distribute water and detergent evenly through fabrics
• Worn or damaged hubs can cause no/weak agitation, slipping, or a loose/wobbly agitator
• Cracked fins or visible wear are common signs this part needs replacement

• Disconnect power to the washer before servicing
• Remove the dispenser or cap to access the agitator retainer as applicable
• Release the retainer and lift the old agitator straight up; seat the new agitator fully on the drive hub
• Run a short test cycle to ensure proper engagement and operation

This elbow nozzle directs wash water to the dishwasher spray assembly to help deliver targeted cleaning inside the tub. It restores proper spray direction so dishes and utensils get rinsed more effectively. What it does

• Channels water flow from the pump to the spray arm or distribution tube.
• Restores proper spray pattern when a cracked or clogged nozzle causes weak or misdirected spray.
• Helps prevent pooling and poor cleaning in hard-to-reach areas of the tub.
• Compatible with systems using the SD3-style elbow connection.

• One elbow nozzle

• Disconnect power and water supply to the appliance before starting any repair.
• Remove the lower spray arm or access panel as needed to reach the nozzle; follow your model's service instructions.
• Inspect adjoining hoses, clips, and fittings for wear and replace if damaged.

The Hose Pump Diverter Valve is an OEM part for Fisher & Paykel washing machines. This hose carries water from the drain pump to the diverter valve during the wash cycle. It ensures that water is properly directed from the pump to the diverter valve, which then routes it either to the drain or recirculates it back into the tub depending on the cycle selected.

Causes of a bad Hose Pump Diverter Valve include cracks or holes from wear and tear, stiffening over time due to heat or chemical exposure from detergents, or blockages caused by debris within the hose.

Symptoms of a faulty Hose Pump Diverter Valve include:

• Inadequate water drainage or recirculation during cycles.
• Unusual noises during water transfer operations.
• Visible leaks around the hose connections.
• The washing machine failing to complete specific cycles correctly due to misrouted water.

This dual water inlet valve controls the appliance's hot and cold water flow, restoring proper fill operations and water routing. It's a direct-fit replacement for systems using a two-port inlet valve designed for US plumbing. What it does

• Opens and closes hot/cold water flow to allow normal fill during cycles
• Routes water between inlet lines so the appliance fills at the correct temperature
• Commonly replaces a failed valve when the unit won't fill, fills slowly, or runs continuously
• Helps stop leaks caused by a valve that doesn't fully close

• Disconnect power and shut off water supply before replacing the valve
• Confirm inlet line orientation (hot vs. cold) and secure all hose connections to prevent leaks
• Handle solenoid and electrical connectors carefully; ensure proper connector seating

This bias spring clip secures and tensions small components and assemblies in place, helping moving parts return to their resting position. It's a compact replacement part for restoring proper spring tension and component alignment. What it does:

• Provides spring tension to hold or return a component to its correct position
• Clips onto mating parts to maintain alignment during normal operation
• Can reduce rattling or misalignment caused by a worn or broken clip
• Small, durable metal spring action designed for repeated cycles

• Disconnect power to the appliance before beginning any work
• Use needle-nose pliers to remove and seat the clip; avoid twisting or forcing parts
• Keep track of adjacent components and orientation for correct reassembly

This Nozzle Spray Fill Assembly is an OEM part for Fisher & Paykel washing machines. This assembly is integral to the proper distribution of water within the washer during the fill and rinse cycles. 

Issues with the nozzle spray fill assembly can occur due to clogging from mineral deposits, wear and tear, or mechanical damage. A compromised assembly can lead to uneven water distribution, impacting the washer's effectiveness.

Symptoms of a bad nozzle spray fill assembly include:

• Inadequate water flow during the fill cycle.
• Uneven or insufficient wetting of clothes during the wash cycle.
• Prolonged fill times indicate restricted water flow.
• Water spraying unevenly or in an unusual pattern.
• Noticeable leaks or drips from the nozzle area during operation.

This OEM Fisher & Paykel part is also compatible with Bertazzoni, Dacor, and Viking brands.
 

This 4-piece suspension kit replaces the washer tub suspension parts that stabilize the drum during spin cycles to reduce vibration and wobbling. Restoring worn suspension components helps improve cycle smoothness and balance. What it does:

• Cushions and supports the washer drum to limit excessive movement during spin
• Reduces vibration, banging, and rocking that occur when suspension parts wear
• Helps maintain proper drum alignment for smoother operation
• Reduces noise caused by an unbalanced or shifting tub

• Disconnect power and water supply before starting any repairs.
• Handle springs and suspension parts carefully; they may be under tension.
• Inspect surrounding mounts and fasteners and replace any damaged hardware.
• After installation, run a short spin cycle to verify reduced vibration and proper balance.

This recirculation pipe assembly routes wash water from the pump to the upper spray arm, restoring proper spray coverage for cleaning performance. It replaces a cracked, clogged or leaking feed pipe to stop leaks and poor wash results. What it does:

• Channels pressurized wash water from the circulation pump to the upper spray arm
• Restores spray coverage when a damaged or clogged pipe causes weak cleaning
• Prevents leaks caused by cracks, splits or failed pipe connections
• Works with the dishwasher's wash system to maintain normal water flow during cycles

• Refer to the dishwasher model service manual for disassembly and reassembly steps
• Disconnect power and water supply before beginning any repair
• Inspect associated clamps, gaskets and spray arm for wear; replace if damaged
• Use appropriate tools and avoid overtightening connections to prevent damage

A replacement Miflex-style hose inlet that connects the appliance to the water supply and provides a secure, flexible water entry point. Helps restore proper water flow and prevents leaks from a worn or damaged inlet connection. What it does:

• Provides a sealed connection between the household water line and the appliance inlet
• Allows flexible routing of the water supply to reduce strain on fittings
• Fits where a Miflex-style inlet hose/assembly is specified by the manufacturer

• Turn off water supply and unplug the appliance before removing or installing the inlet
• Inspect hose and fittings for wear; replace any damaged clamps or gaskets for a secure seal
• Hand-start threads to avoid cross-threading, then tighten per manufacturer guidance

The Lid Lock and Harness Assembly is an OEM part for Fisher & Paykel washing machines. It utilizes a locking mechanism and wiring harness to securely maintain the washer lid shut during cycles. Preventing water leaks is a top priority.  

Symptoms of an insufficient lid lock and harness assembly include:

• The washer lid popping or swinging open during cycles
• Water leaks emerging around the lid  
• An inability to reliably lock the lid closed for the duration of cycles

Causes of a failed lid lock can include normal wear of moving parts from frequent use. Mineral buildup in hard water areas can corrode lock components over time as well.

This thermistor assembly service kit replaces a failing temperature sensor to restore accurate temperature monitoring and control. Ideal for systems that need a direct-replacement sensing element and connector harness. What it does:

• Senses internal temperature and sends a signal to the control board for proper cooling/heating regulation.
• Commonly used when a unit reports incorrect temperature, runs too long, cycles frequently, or shows related error codes.
• Helps prevent overcooling or insufficient cooling caused by a faulty sensor.
• Replaces a damaged or intermittent thermistor connection that can cause inconsistent performance.

• One thermistor assembly service kit (sensor with attached harness/connector as pictured)

• Disconnect power before starting work to avoid shock or equipment damage.
• Handle the sensor and wiring gently; avoid touching the sensing tip with bare hands or contaminating it.
• Route and secure the harness to match the original path; ensure connectors fully seat.

This spline drive kit replaces the worn drive spline that transfers motor torque to the appliance drivetrain, restoring reliable rotation and engagement. Use when the drive slips, hesitates, or makes grinding or rattling noises. What it does:

• Re-establishes positive spline engagement between motor and driven components
• Stops slipping or intermittent rotation caused by worn or damaged splines
• Reduces grinding, clicking, or vibration from a compromised drive connection
• Helps restore normal operation of the appliance's drivetrain

• Disconnect power (and water if applicable) before starting any repair
• Basic hand tools required; avoid forcing parts into position
• Inspect mating parts for wear; replace damaged components to prevent repeat failure
• Test unit after installation to ensure proper engagement and quiet operation

The Agitator Bolt is an OEM part for Fisher & Paykel washing machines. This bolt secures the agitator hub to the lower agitator bearing. It bears significant rotational force to power agitation during washing cycles.

• Symptoms of a bad agitator bolt can include:
• Loose, wobbly, or detached agitator assembly
• Vibration and noise coming from the agitator area
• Reduced or ineffective agitation during wash cycles

Causes of a bad agitator bolt include stripping or wear of threads over time and use, shearing from continuous high torque loads, or damage such as cracking from impacts.