Az22e15d3cm2 Parts

This replacement propeller is used on the outdoor fan of room air conditioners. It mounts to the condenser fan motor shaft to move air across the condenser coil, restoring heat rejection and airflow when the original blade is damaged or unbalanced. What it does:

• Moves outdoor air through the condenser coil to expel heat
• Helps address poor cooling caused by weak or no condenser airflow
• Replaces cracked, warped, or loose blades that cause vibration or scraping noises
• Symptom check: outdoor fan not spinning, weak airflow, rattling, or visible blade damage

• Includes: 1 propeller

• Disconnect power before servicing; wear gloves—blade edges can be sharp
• Note blade orientation and hub depth on the motor shaft before removal
• Remove the fastener/set screw and pull the old blade straight off; avoid bending coil fins
• Install the new blade in the same orientation, secure firmly, then test run

This protector heater is a small heating element used with the overload/thermal protector in the motor or compressor circuit. It provides calibrated warmth so the protector trips correctly under heavy load, helping prevent overheating and protecting the unit. What it does:

• Works with the overload/thermal protector to ensure proper trip timing
• Helps prevent overheating and potential damage to the motor/compressor
• Common signs include repeated clicking near the compressor area or frequent overload trips

• 1 protector heater

• Disconnect power and safely discharge the run capacitor before servicing
• Photograph or label wiring and component orientation for accurate reassembly
• Install in the same position/orientation as the original with secure, insulated connections and proper wire routing
• Inspect the overload, start device, and terminals; replace any burnt or loose connectors to prevent repeat failures

Color: tan. Measures about 1-1/2 inches in diameter.

A rubber compressor cushion that isolates the compressor from the refrigerator chassis to reduce vibration and prevent metal-on-metal contact. Replaces worn or missing cushions to help minimize noise and vibration transfer. What it does:

• Cushions the compressor to dampen vibration and reduce rattling or buzzing noises.
• Keeps the compressor from directly contacting the cabinet, preventing wear and chafing.
• Helps maintain proper compressor positioning and reduces stress on mounting components.
• Common symptom: increased compressor noise or vibration, or visible worn/deteriorated cushion.

• One compressor cushion (rubber mount).

• Disconnect power to the appliance before starting any repair.
• Support the compressor or secure the unit when removing/replacing mounts to avoid strain.
• Remove the old cushion and press the new cushion into place; no refrigerant handling required.
• Use basic hand tools and wear gloves.

This thermal overload protector safeguards the motor/compressor circuit by opening when temperature or current rises too high. Replacing a failed protector helps prevent damage and restore reliable operation when the unit won't stay running.

• Opens the circuit on over-temperature/over-current to protect windings
• Helps address symptoms like: hums then clicks off, won't start, or shuts down shortly after starting
• Often resets when cool; repeated tripping indicates a failing protector or a related issue
• Mounts against the component for accurate thermal sensing

• Disconnect power at the breaker before servicing; capacitors can retain a charge
• Note wire locations and transfer one at a time; terminals should fit snugly
• Seat/clip the protector firmly as designed for proper heat transfer
• If the old protector shows heat damage, also inspect the start relay/capacitor, wiring, and the motor/compressor

This fan motor circulates cold air across the evaporator coil to help maintain proper refrigerator cooling and airflow. Replacing a failing motor restores consistent cooling and can stop abnormal noise or intermittent fan operation. What it does:

• Spins the evaporator fan blade to move cold air through the freezer and refrigerator compartments
• Helps maintain even temperatures and efficient heat exchange at the evaporator coil
• A worn or failed motor can cause loud whining, rattling, intermittent run/no-run behavior, or reduced cooling
• Restoring proper fan operation can reduce frost buildup on the evaporator caused by poor airflow

• One fan motor

• Disconnect power to the appliance before starting any repair
• Remove interior panels or the evaporator cover to access the motor and fan blade; keep fasteners organized
• Handle the fan blade carefully to avoid bending; ensure correct blade orientation when reinstalling
• This motor is typically a sealed unit—do not attempt to disassemble or lubricate the motor; follow OEM service instructions

This temperature control cover protects and finishes the refrigerator control area, keeping the thermostat knob and wiring enclosed for a clean, safe look. It restores appearance and prevents debris from contacting the control assembly. What it does:

• Covers and protects the temperature control/knob area from dust, spills and accidental contact
• Helps keep the control knob stable and correctly positioned for reliable adjustments
• Restores the appliance's finished appearance when the original cover is cracked or missing
• Reduces risk of foreign objects reaching the control assembly

• Disconnect power (unplug or switch off breaker) before servicing the control area.
• Remove the control knob and any screws or trim panels as needed to access the cover.
• Handle plastic parts gently to avoid cracking; align tabs and secure fasteners fully.

This electronic control unit operates the appliance's user interface and key functions, restoring responsive controls and programmed cycles. Replaces a failed or unresponsive control board to recover normal digital control operation. What it does:

• Manages touchpad/console inputs and translates commands to the appliance's systems
• Controls timing, cycle selection, and electronic signals to components
• Can resolve symptoms like unresponsive buttons, error codes, or loss of programmed functions
• Stops operation when the board detects faults, helping protect the appliance from further damage

• Disconnect power at the breaker or unplug the appliance before attempting any service
• Handle the board by its edges and avoid touching components to prevent ESD damage
• Verify connector orientation and secure all wiring harnesses before testing