Hps10lsbrss Parts

The Evaporator Fan Motor is an OEM replacement part for Whirlpool refrigerators. It is responsible for powering the evaporator fan to circulate air. Over time, the motor can fail due to wear and tear. Causes of a bad evaporator fan motor include seized bearings, electrical shorts, and worn out windings.

Symptoms of a failed motor:

• No cold air circulation
• Lack of airflow
• Excessive frost and ice buildup
• Fluctuating temperatures

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This defrost heater melts frost and ice from the evaporator to restore proper airflow and cooling in frost-prone refrigerators. It helps prevent heavy ice buildup that can reduce cooling efficiency and cause temperature problems. What it does:

• Warms the evaporator coil during the defrost cycle to remove accumulated frost and ice
• Restores normal airflow through the evaporator so the refrigerator can cool properly
• Common symptom: visible ice buildup on the evaporator or reduced cooling performance
• Common symptom: refrigerator runs longer than normal or fails to maintain set temperature

• One defrost heater assembly

• Always disconnect power to the appliance before servicing to avoid shock hazard
• Handle the evaporator and heater carefully to avoid damaging coils or wiring
• Verify continuity of the heater with a multimeter before and after installation
• If recurring icing occurs, inspect and test the defrost thermostat, timer, and control components

The R600 Process Valve with Red Cap is an OEM part for GE refrigerators. It regulates the flow of refrigerant within the cooling system, ensuring proper cooling and temperature control.

A bad process valve can occur due to wear and tear, refrigerant leaks, or mechanical failure. If you notice symptoms such as inadequate cooling, excessive frost buildup, or unusual noises coming from the refrigerator, it may indicate a faulty or malfunctioning process valve.

Symptoms of a bad process valve include:

• Inadequate cooling or inconsistent temperature control
• Excessive frost buildup in the freezer
• Unusual noises coming from the refrigerator

Restore your refrigerator by replacing the faulty process valve with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Fresh Food Door Bin is an OEM component specifically designed for GE refrigerators. This multi-purpose door storage inserts neatly into the fresh food compartment door to conveniently hold condiments, sauce bottles, and beverages. 

The Door Bin helps reduce clutter by selectively corralling smaller items and organizing the fridge interior. Its angled design allows for the visibility of contents without obstructing.

Causes of a faulty bin include cracks or fractures in the plastic casing along stress points. Long-term vibration and impacts in the closing refrigerator door can degrade it over time.

Symptoms include:

• Leaks from cracked or broken sections
• Wobbly or loose installation 
• Capacity for storing items is reduced

This OEM GE part restores maximized storage functionality. Replace to continue easy access and organization within your fridge. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This vegetable pan is the replacement crisper drawer pan that holds produce in the refrigerator's fresh-food section, keeping fruits and vegetables organized and contained. It restores drawer storage when the original pan is cracked or missing. What it does:

• Serves as the lower bin/crisper to hold fruits and vegetables and keep them contained
• Replaces cracked, broken, warped, or missing pans that can no longer support stored produce
• Helps restore proper drawer function and organization in the fresh-food compartment
• Fits into existing tracks or supports used by the factory drawer assembly

• One vegetable (crisper) pan

• Remove food and the damaged pan, then slide the new pan into the existing tracks or supports
• No special tools typically required; handle carefully to avoid scratching or cracking the new pan
• Clean with mild soap and water before first use; do not use abrasive pads or harsh chemicals
• Wear gloves to protect hands from sharp edges during removal

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This evaporator fan bracket secures the evaporator fan motor and blade assembly inside the freezer compartment so the fan runs steadily and quietly. It restores proper airflow support for efficient cooling. What it does:

• Holds the evaporator fan motor and blade in the correct position so air circulates across the evaporator coil
• Prevents excess vibration and noise from a loose fan assembly
• Helps maintain consistent freezer temperature by keeping the fan aligned and stable
• If the original bracket is cracked, broken, or missing

• One evaporator fan bracket

• Disconnect power to the appliance before beginning any work
• Access may require removing interior panels and defrosting if frost blocks the area
• Handle the evaporator coil and nearby tubing gently to avoid damage
• Secure bracket with the original fasteners; inspect fan motor and blade for damage while replacing

The Glass Shelf is an OEM replacement part for GE refrigerators. It is designed to provide a sturdy and reliable surface for storing various food items inside the refrigerator.

A bad glass shelf can occur due to wear and tear, accidental damage, or misalignment. If you notice symptoms such as cracks, chips, or a sagging shelf, it may indicate a need to replace the glass shelf.

Signs of a faulty glass shelf include:

• Cracks or chips on the surface
• Sagging or instability
• Difficulty in storing or accessing items

Restore your GE refrigerator by replacing the faulty glass shelf with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A replacement plastic top hinge cover that restores the finished look and protects the refrigerator hinge area from dust, dirt and accidental contact. Helps hide hardware and prevents debris buildup at the door pivot. What it does

• Covers and protects the top hinge assembly from dust, spills and incidental contact.
• Restores finished appearance when the original cover is cracked, broken or missing.
• Helps prevent dirt and debris from interfering with hinge operation.
• Reduces sharp edges or exposed hardware that can catch clothing or fingers.

• High-level task: access requires removing the door or lifting it slightly to relieve hinge pressure.
• Always support the door when removing or installing hinge components to avoid injury or damage.
• Unplug the appliance or shut off power to avoid unexpected operation while working on the door area.
• Inspect hinge fasteners and surrounding trim during installation; replace any damaged hardware as needed.