Tecumseh Chipper Shredder Parts

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.

This intake manifold allows an engine to get the air it needs in order to run properly. Any engine runs on three things - air mixed fuel, the sparks, and combustion. It is the intake manifold that delivers the air to all of the cylinders and guarantees function. This gasket is used to replace a pre-existing intake manifold gasket that has dried out or has failed to keep the intake manifold properly sealed to the engine. This may allow air leaks or uneven air pressure in the cylinders, affecting how well the engine runs. Any gasket may wear out with time and use, and replacing the a failed intake manifold gasket with this OEM part is one way to ensure that the engine is again running at optimal levels. The repair requires wrenches, socket sets, and the appropriate components for the engine in question. This is a gasket for an intake manifold on an array of lawnmowers, lawn tractors, and snowblowers made by Tecumseh, Toro, MTD, and Lawn-Boy, and others. This high-quality intake gasket ships individually and is made of composite materials.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

A fuel inlet is a connector that allows gasoline from the fuel line of an engine to pass through it into the carburetor. Once in the carburetor, the fuel mixes with air and passes into the cylinder, where it ignites to create power for the engine. Thus, the fuel inlet is attached on the one side the carburetor and to the fuel pipe, or line, on the other. This inlet is used in power tools such as lawn mowers, snowblowers, edgers, pressure washers, chippers, and generators. Periodically, since it is made partially of plastic, the fuel inlet will weather and crack so that it is no longer fuel tight. The main sign to watch out for with fuel inlets is gasoline leakage. This is always a dangerous situation. The user may have to remove the carburetor housing cover to determine whether the leak comes from the fuel line or the inlet valve. It is a good idea to replace each of these pieces at the same time. When choosing a replacement part for the fuel inlet, always use a genuine OEM replacement part like this one. This inlet is compatible with power tools made by Tecumseh, Briggs & Stratton, Toro, MTD, Lawn-Boy, and Cub Cadet.

The comprehensive carburetor kit contains all of the parts and components necessary to make almost any repair to a carburetor on the makes and models mentioned. A carburetor is a part that mixes air and fuel within any combustion engine. Without adequate or ideal air to fuel mixtures, the engine may misfire or run poorly. It is not unusual for older or heavily used engines to need carburetor repairs. This is a carburetor kit for lawn tractors, lawnmowers, and small engines made by Tecumseh, Toro, Lawn-Boy, Cub Cadet, and MTD, among others. It ships individually.

As an ignition coil, this OEM replacement part is tasked with sending voltage to a spark plug whenever the engine is not currently running. It can be used in many tools including snowblowers and lawnmowers. If the ignition coil has malfunctioned or is no longer working, the engine on the lawn and garden equipment will not start. In some cases, a replacement governor arm will also be required.In some cases, when an ignition coil breaks or stops working properly, it will have evidence of cracks, carbon tracking, or burn marks. If visual inspection shows any of those things are present, the ignition coil will need to be replaced. Testing the ignition coil is simple and requires switching it out for a new one to see if the problems stop occurring. A spark tester can also be used to see if the ignition coil has gone bad.This ignition coil is a genuine OEM part sourced directly from the manufacturer. It is compatible with lawnmowers, generators, snowblowers, and tillers manufactured by Briggs & Stratton, Tecumseh, Craftsman, and Toro. It comes as an individual part. An ignition tester can be useful for installation and troubleshooting with this component.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This is a fuel fitting that is part of the fuel assembly on many models of snowblowers and lawnmowers with engines. It's made of durable metal and plastic. The part is used to move fuel from the fuel tank into the engine carburetor. The fuel fitting is responsible for drawing the pressure needed to pump fuel so the lawn and garden equipment can operate. The fuel fitting can be damaged through use or impact and will no longer work as expected. If this occurs, the fuel fitting will need to be replaced.Depending on the equipment that contains the fuel fitting, tools for a replacement might include a pair of pliers, a screwdriver, and a hex key. If a visual inspection shows that the fuel fitting is cracked, turn off the equipment and disconnect the spark plug wire. Remove the fuel fitting from the carburetor and the fuel tank and replace it with a new part.This fuel fitting is designed to be used with lawn mowers and snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet. It is sold as an individual part. This is a genuine OEM replacement part that is directly sourced from the manufacturer.

This is a genuine OEM screw replacement sourced directly from the manufacturer. It is a muffler stud screw used on lawn mowers, snowblowers, and other outdoor lawn and garden engines. This muffler screw attaches the muffler to the engine. These screws go directly through the muffler case and into the engine housing. There is no need for a nut or other fastener. Over time, vibration from the engine may cause them to loosen and possibly fall out. If this happens, the muffler can fall off. Periodic inspection and tightening will prevent this from occurring. A visual inspection as well as checking the tightness by hand will reveal any issues.If the screws are missing or rusted and need to be replaced, make sure the muffler has cooled before attempting to remove the screws. Use a wrench to remove the screws from the muffler. Insert the new screws and hand tighten. Use the wrench to tighten slightly more. Be careful not to overtighten and strip the screws. These screws are 1/4-20 x 2-9/32, gold in color, and sold individually. These muffler shoulder screws are compatible with lawnmowers, snow blowers, chippers, edgers, pressure washers, and other engines manufactured by MTD, Craftsman, Tecumseh, Toro, and Cub Cadet.