Tecumseh Edger Parts

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

This part is an oil filler tube. The oil filler tube is what directs replacement oil into the engine when oil is being replaced or added to the engine. This allows the user to easily fill the engine with oil. A new oil filler tube may be needed if there is any sign of wear or damage to the part. If there are any leaks when refilling the engine with oil, then the oil filler tube should be replaced.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This oil filler tube is compatible with chippers, shredders, edgers, engines, pressure washers, vacuums manufactured by Tecumseh, Husqvarna, Toro, Lawn-Boy, Cub Cadet, and MTD.

This air vane is a genuine MTD part and a genuine OEM part. This air vane can be used as a replacement part for snowblowers and lawn and garden equipment engines. The function of the air vane is to maintain precision tension in order to keep the small outdoor appliance engine running. Air vanes may be replaced during the process of basic engine maintenance. If there is an issue with the precision tension of the snowblower, lawn mower, or other appliance at hand, there might be a problem with the air vane. At first, attempt to tighten the spring of the air vane, as it might have naturally come loose with time. If that does not work, a replacement might be necessary. Air vanes are subject to damage simply from long-term usage or exposure to the elements. If there is visible damage to the air vane, action should be taken immediately to replace it if continuing to use the appliance. Continued use with a damaged air vane will be at the risk of expense to personal property. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.This air vane is also compatible with the brands Tecumseh and Toro.

This is a starter dog that is located right next to the retainer in many types of lawn and garden equipment. It is made of durable metal. This part is responsible for engaging the recoil starting system on the engine. Sometimes the starter dog can become damaged or worn, which will result in an engine that has trouble starting. In this situation, the starter dog will need to be replaced to ensure the lawn equipment works as expected.If the starter dog needs to be replaced, a pair of pliers will be needed for the process. Place the tool on a level surface and disconnect the spark plug wire. The blade assembly and clutch assembly will need to be removed to get access to the starter dog. Take this part out of the tool and replace it with a quality new component. Reassembly the other parts before use.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is made to be compatible with lawnmowers, snowblowers, tillers, edgers, and generators manufactured by Tecumseh, Briggs & Stratton, Toro, Cub Cadet, and Craftsman. The starter dog is sold as an individual part.

This is a genuine cylinder head bolt replacement designed for use on select small engines found in outdoor power equipment. The cylinder head bolt is responsible for securing the cylinder head in the engine. It is exposed to constant vibrations and high pressure, which can lead to eventual wear and damage. These bolts will need to be replaced immediately if they become damaged or broken. If the bolts are not replaced, the cylinder head will not be secure and that could cause further engine damage or total failure. This genuine OEM replacement bolt is manufactured by Tecumseh and designed for use in engines in a number of its small outdoor power machines. This part is compatible with dozens of engines and the exact number of bolts and placement may vary based on the model. The parts diagram should provide information on the application and location of this part. This bolt is sold as an individual unit, and those who need more than one will have to order multiple quantities. Always wear gloves for hand protection and allow the engine to cool before performing any engine repairs. This replacement bolt requires a hex socket or screwdriver.

Carburetors must have tight seals to prevent too much air from getting into the carburetor at one time. If there are issues with a welch plug, it could cause an engine to lose power or to run rough. The plug might have lost its seal, it could have cracked, or it could have become lost. Sometimes, the vibration of the engine is enough to cause a plug to fall out if it is not tightly sealed. A loose fit will cause problems with the flow of fuel. This genuine OEM welch plug is sold individually and can help to seal your carburetor so your engine retains power. The part can be used with a range of lawn tractors, lawnmowers, snowblowers, and small engines. Compatible brands include Tecumseh, Lawn-Boy, Toro, Craftsman, and MTD.

This is a genuine throttle return spring used on select small engines. The throttle return spring is part of the throttle system. It is attached to the throttle cable and the throttle body or carburetor, and is responsible for pushing the throttle closed when the gas is released and opening the throttle when the throttle trigger is engaged. If the spring is faulty, the throttle will not be able to open and close properly. This can affect the machine's ability to operate and even prevent it from operating at all if the throttle remains closed and no power can get through. A replacement should be done as soon as possible to prevent further damage to the engine. This genuine OEM throttle return spring is manufactured by Tecumseh, and compatible with machines from Toro, Husqvarna, MTD, Lawn Boy, and Tecumseh. There are over 150 models that can use this replacement part. It is made of durable metal and sold as an individual part. This throttle return spring is a simple replacement that should only take a few minutes. Be sure to use care when replacing the spring because it can be susceptible to damage under excessive pressure or strain.

This dampening spring float is for use in lawn and garden carburetors. It is a vital component that prevents flooding in the carburetor, particularly if the equipment is going over rough terrain or is otherwise unstable.When replacing a missing or damaged spring float, be sure to refer to the manual and diagrams for the carburetor it is being installed in. Location and application of this hardware will vary based on the model of the carburetor.This dampening spring float is a genuine OEM part sourced directly from the manufacturer. It is sold individually. The manufacturer is Tecumseh. This dampening spring float is compatible with products by the following brands: Tecumseh, Craftsman, Toro, Cub Cadet, Lawn Boy, and Husqvarna.

This durable metal screw is used in various types of lawn and garden equipment. A screw can be used on its own to attached two components together. It can also be used with a nut when there is a pre-drilled, threaded hole for it to go in. If a nut is being used, it should have the same finish and use the same threading as the screw does.This screw is typically used to fasten a fuel tank to a tank mounting bracket on the engine. It can be damaged in many ways and will need to be replaced if it has failed. Extreme temperatures, excess stress, and corrosion can all damage or break the screw. Do a visual inspection of the part to see if it has any wear and tear or has broken. If it has, it can be replaced using a screwdriver.This screw is designed to be used with lawnmowers, snowblowers, tillers, pressure washers, edgers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Cub Cadet, Toro, Tecumseh, Lawn-Boy, Snapper, Simplicity, and MTD. It is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual screw.

This screw is a genuine Tecumseh replacement part for several different kinds of small engines, including lawn tractors, lawn mowers, snowblowers, woodchippers, and generators. A screw's function is to tightly join parts together through rotation of the screw. This prevents the materials from loosening and unfastening over time. A screw might be misplaced or lost the screw altogether, since it is a small object that can easily fall out of its place and disappear if loosened. Other reasons to replace a screw can include the gradual deterioration, erosion, cracking, or piercing over time; this kind of damage can be attributed to general overuse or exposure to the elements. If a screw is subject to any of this kind of damage, it is best to replace it before using the appliance at hand, as the pieces must continue to be held together by the screw. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the brands Tecumseh, Craftsman, Toro, and Briggs and Stratton. This part sold individually.