Tecumseh Gasket & Seal

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.

This intake manifold allows an engine to get the air it needs in order to run properly. Any engine runs on three things - air mixed fuel, the sparks, and combustion. It is the intake manifold that delivers the air to all of the cylinders and guarantees function. This gasket is used to replace a pre-existing intake manifold gasket that has dried out or has failed to keep the intake manifold properly sealed to the engine. This may allow air leaks or uneven air pressure in the cylinders, affecting how well the engine runs. Any gasket may wear out with time and use, and replacing the a failed intake manifold gasket with this OEM part is one way to ensure that the engine is again running at optimal levels. The repair requires wrenches, socket sets, and the appropriate components for the engine in question. This is a gasket for an intake manifold on an array of lawnmowers, lawn tractors, and snowblowers made by Tecumseh, Toro, MTD, and Lawn-Boy, and others. This high-quality intake gasket ships individually and is made of composite materials.

This is a replacement carburetor gasket. The gasket plays an important role in the carburetor. It helps to ensure that there is no additional air getting into the carburetor. It also ensures no dirt or other debris makes it into the carburetor. If the gasket is not working properly or has been damaged, air and other elements that get into the carburetor could cause the engine to run rough. It could also make it more difficult to start the engine.Over time, the carburetor gasket will wear down and will need to be replaced. Gaskets will dry out and crack the longer they've been used. There is also the possibility that the gasket has not been seated properly, which would require repair. Whenever owners are servicing the carburetor, they should make it a point to replace the gaskets, even if they appear to be in serviceable condition.This gasket is an OEM replacement part sourced directly from the manufacturer. It will work for certain models of carburetors from Tecumseh and Craftsman. Each of the gaskets is sold individually.

The oil seal is designed to stop fluid from leaking out, as well as to ensure that dirt and other debris do not make their way into the oil. When applied properly, it should create an impermeable seal. It also provides spacing between the crankcase and the crankshaft. If the oil seal has been damaged or has degraded because of wear and tear, it will need to be replaced. Some of the signs that the oil seal might be bad include leaks or an engine that is not performing properly. Users might also notice that the machine is going through oil quickly. This is an authentic OEM product that is sold individually. The oil seal can be used with many types of lawn and garden equipment including lawn mowers, snowblowers, tillers, pressure washers, wood chippers, generators, and other small engines. Compatible brands including Briggs & Stratton, Simplicity, Snapper, MTD, Lawn-Boy, Tecumseh, Cub Cadet, Toro, and Craftsman.

This genuine Tecumseh cylinder head gasket cover can be used as a replacement part for the small engine of a snowblower or a tiller. The cylinder head gasket seals off the cylinder head from the engine block. The function of a cylinder head gasket cover is to protect the cylinder head from damage and provide additional insulation.A cylinder head gasket cover might suffer damage over time from general overuse or wear and tear. This damage can come in the form of punctures, piercings, and corrosion to the cover that chip away at the gasket cover's ability to protect the cylinder head gasket and seal it off. If cylinder head gasket cover shows these signs of damage, it should be immediately removed and replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This cylinder head gasket cover is compatible with the following brands: Tecumseh, Toro, Craftsman, and Husqvarna.

This cylinder head gasket is an original OEM part sourced directly from the manufacturer, Tecumseh. It is sold individually. A cylinder head gasket is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, a generator, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Tecumseh, and Simplicity.The cylinder head gasket part is crucial because it serves as the seal between the engine block and cylinder head or heads. Its purpose is to seal the combustion gases within the cylinders, thereby avoiding leaking of coolant or engine oil into the cylinders. Leaks in the head gasket can be problematic because they prevent the engine from running properly and often lead to overheating.The replacement or repair process of the cylinder head gasket should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This breather gasket is made of durable but flexible plastic, designed to seal the cylinder block and the breather body. A breather is a pipe that enables internal combustion in the engine to properly vent any crankcase pressure out of the engine. It is essentially a venting pipe or system and ensures that the engine's piston rings seal tighter against the cylinder walls (however many there are in that engine). When this gasket dries out, that pressure and seal cannot be created effectively and the engine may malfunction. Replacing the breather gasket means using a wrench to disassemble the breather, clean the surfaces, remove the original gasket, and use this authentic replacement part before reassembling This is an OEM replacement part designed for Toro, Tecumseh, Lawn-Boy, MTD, and Husqvarna equipment, including snowblowers and other small engine systems. This item ships individually.

This is a replacement crankcase gasket that can be used for a range of outdoor power equipment and small engines including lawn mowers. The crankcase gasket helps to provide a seal between the crankcase and the crankcase cover. It will help to ensure that there are no oil leaks, which could cause performance problems with the engine. The crankcase gasket should be checked on when owners do regular maintenance to their machines. The gaskets can start to have problems the longer they are used. They can start to dry out and crack, and they may even break. These kinds of issues could then cause an oil leak. This not only causes a mess, but it will waste oil. The replacement is relatively easy to perform. The crankcase gasket is made from durable material, and it is a genuine OEM part right from the manufacturer. It can be used with many types of small engines including those found on pressure washers and lawn mowers. Brands with compatible models include Tecumseh, Lawn-Boy, Toro, and Briggs & Stratton.

This replacement cylinder head gasket is a genuine part manufactured by Tecumseh for use in select lawn and garden engines. The cylinder head gasket is designed to fit between the cylinder head and the crankcase, sealing the flow of air and fuel through the engine and preventing oil from getting into the fuel. The gasket is exposed to high heat and constant pressure and will become brittle and worn over time. This could affect the seal and lead to bigger problems, so an immediate replacement is necessary. This OEM cylinder head gasket is manufactured to exact standards by Tecumseh and can be used in select models from the brand, as well as those from Toro and Lawn-Boy. The gasket fits certain models of pressure washers, lawnmowers, and chippers. It is sold as an individual unit and doesn't include any hardware or accessories. Replacing the cylinder head gasket should only be done when the engine is cool. Wear gloves and work in a well-ventilated space when doing this kind of work for safety. When replacing gaskets, always use care with the new part so that it doesn't get broken or damaged during installation.

This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.